FYI, this went off off without a hitch. -derek
Derek Atkins <[email protected]> writes: > Some of you may or may not have noticed a short outage on Monday. I had > a short power outage (around 20 minutes) during which time the UPS took > over and kept everything going. Yay. However, after power came back, > the UPS didn't switch back to the line source, so it ran on battery > until the batteries got low, at which point it started shedding load. > Boo. Even worse, I couldn't get the unit to reset, so I moved all the > equipment over to line power to get it all running again. > > The good news is that I determined I have about 2 hours of backup :-/ > > After working with tech support Monday and Tuesday we determined that > it's most likely the SNMP/Web Card that caused the unit to fail to > return to line voltage once the power returned. I've removed the card > and reset the unit and have been testing it without load with success. > > So I want to make a short (30 minute) window to move the equipment back > to the UPS. I plan to do that this afternoon, around 3pm US/EDT (1900 > UTC). It should be relatively quick as I shut down the systems, move > the plugs, and power them on. > > Please let me know if you have any issues with this timing. > > -derek -- Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory Member, MIT Student Information Processing Board (SIPB) URL: http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH [email protected] PGP key available _______________________________________________ gnucash-devel mailing list [email protected] https://lists.gnucash.org/mailman/listinfo/gnucash-devel
