Hi, I recently built a newer ubuntu server and started gnump3d (v 1.18) up on it. It was working fine for a few weeks, until today, when I attempted to include an IP in the allowed_clients = list. (appending a semicolon and the ip to the current list).
I backed out that change and set it back to only allow my local network ips in: allowed_clients = 192.168.1.0/8 I may well have screwed up the configuration file, but can't get it working again. The odd thing is that it even has a process id (see below). Using the older config file results in the same behavior. I run a restart of the daemon and it indicates that it wasn't running in the first place: $sudo /etc/init.d/gnump3d restart Restarting gnump3d: start-stop-daemon: warning: failed to kill 17689: No such process gnump3d. I can confirm that it didn't start with this bit of bash (which returns no results): $ps -A|grep gnump3d If I run just a start, i get this output, but again gnump3d doesn't actually start: $sudo /etc/init.d/gnump3d start Starting gnump3d: gnump3d. Any help would be greatly appreciated
_______________________________________________ Gnump3d-users mailing list [email protected] http://lists.gnu.org/mailman/listinfo/gnump3d-users
