Author: durner Date: 2005-06-28 11:27:11 -0700 (Tue, 28 Jun 2005) New Revision: 1112
Modified: GNUnet/contrib/gnunet.root GNUnet/contrib/gnunet.user Log: regenerated by "gnunet-setup recreate" Modified: GNUnet/contrib/gnunet.root =================================================================== --- GNUnet/contrib/gnunet.root 2005-06-28 18:01:38 UTC (rev 1111) +++ GNUnet/contrib/gnunet.root 2005-06-28 18:27:11 UTC (rev 1112) @@ -1,639 +1,166 @@ # -# (first two lines of this file are generated by gnunetd, -# see src/util/generate in the SVN source code! They will -# set the first section to [GNUNETD] and also define -# the GNUNETD_HOME directory (see explanation below). +# Automatically generated by gnunet-setup # -# This is the configuration for the GNUnet daemon, gnunetd. -# Copy this file to "/etc/gnunet.conf" if you are root. -# For any other location, you must explicitly tell gnunetd -# where this file is (option -c FILENAME). -# -# After any change in this file, you may want to manually restart -# gnunetd since some changes are only recognized after a re-start. -# Sending a SIGHUP to gnunetd will trigger re-reading the following -# options: -# NETWORK: HELOEXCHANGE -# GNUNETD: LOGLEVEL -# LOAD: INTERFACES -# LOAD: BASICLIMITING -# LOAD: MAXNETDOWNBPSTOTAL -# LOAD: MAXNETUPBPSTOTAL -# LOAD: MAXCPULOAD -# -# -# This file is structured as follows. -# 1) GNUNETD_HOME - base directory for all GNUnet files -# 2) gnunetd options (which transport and application services, logging) -# 3) network configuration -# 4) load management (resource limitations) -# 5) UDP, TCP and SMTP transport configuration -# 6) configuration for anonymous file sharing (AFS) -# -################################################# -######################################### -# Options for the GNUnet server, gnunetd -######################################### - -[GNUNETD] - -# This line gives the root-directory of the GNUnet installation. Make -# sure there is some space left in that directory. :-) Users inserting -# or indexing files will be able to store data in this directory -# up to the (global) quota specified below. Having a few gigabytes -# of free space is recommended. -# Default: GNUNETD_HOME = /var/lib/GNUnet -# GNUNETD_HOME = /var/lib/GNUnet - -# How many minutes is the current IP valid? (GNUnet will sign HELO -# messages with this expiration timeline. If you are on dialup, 60 -# (for 1 hour) is suggested. If you are having a static IP address, -# you may want to set this to a large value (say 14400). The default -# is 1440 (1 day). If your IP changes periodically, you will want to -# choose the expiration to be smaller than the frequency with which -# your IP changes. -# The largest legal value is 14400 (10 days). -# Default: HELOEXPIRES = 1440 -HELOEXPIRES = 1440 - -# Loglevel, how much should be logged? You can use NOTHING, FATAL, -# ERROR, FAILURE, WARNING, MESSAGE, INFO, DEBUG, CRON or EVERYTHING -# (which log more and more messages in this order). Default is -# WARNING. -LOGLEVEL = WARNING - -# In which file should gnunetd write the logs? If you specify -# nothing, logs are written to stderr (and note that if gnunetd runs -# in the background, stderr is closed and all logs are discarded). -# Default: LOGFILE = $GNUNETD_HOME/logs -LOGFILE = $GNUNETD_HOME/logs - -# How long should logs be kept? If you specify a value greater -# than zero, a log is created each day with the date appended -# to its filename. These logs are deleted after $KEEPLOG days. -# To disable this function, set this setting to its default -# value 0. -KEEPLOG = 0 - -# In which file should gnunetd write the process-id of the server? If -# you run gnunetd as root, you may want to choose -# /var/run/gnunetd.pid. It's not the default since gnunetd may not -# have write rights at that location. -# Default: PIDFILE = $GNUNETD_HOME/gnunetd.pid -PIDFILE = $GNUNETD_HOME/gnunetd.pid - -# This directory should be made available periodically --- it contains -# information how to join GNUnet that is in no way private to the -# local node. This directory can be shared between nodes AND should -# be put on a public web-server (if possible). You should find a list -# of known hosts under http://gnunet.org/hosts/, you can copy -# those files into this directory. -# -# If you specify a HOSTLISTURL, the directory will be automatically -# populated by gnunetd with an initial set of nodes. -# Default: HOSTS = $GNUNETD_HOME/data/hosts/ -HOSTS = $GNUNETD_HOME/data/hosts/ - -# GNUnet can automatically update the hostlist from the web. While -# GNUnet internally communicates which hosts are online, it is -# typically a good idea to get a fresh hostlist whenever gnunetd -# starts from the WEB. By setting this option, you can specify from -# which server gnunetd should try to download the hostlist. The -# default should be fine for now. # -# The general format is a list of space-separated URLs. Each URL must -# have the format http://HOSTNAME/FILENAME +# Server configuration # -# If you want to setup an alternate hostlist server, you must run a -# permanent node and "cat data/hosts/* > hostlist" every few minutes -# to keep the list up-to-date. -# -# If you do not specify a HOSTLISTURL, you must copy valid hostkeys to -# data/hosts manually. -# Default: HOSTLISTURL = "http://gnunet.org/hostlist"; -HOSTLISTURL = "http://gnunet.org/hostlist"; -# If you have to use a proxy for outbound HTTP connections, -# specify the proxy configuration here. Default is no proxy. -# HTTP-PROXY = localhost -# HTTP-PROXY-PORT = 1080 - -# Which applications should gnunetd support? Specify the name of the -# dynamic shared object (DSO) that implements the service in the -# gnunetd core here. Separate multiple modules with spaces. # -# Whenever this option is changed, you MUST run gnunet-update. +# Meta-configuration # -# Currently, the available applications are: -# advertising: always load this one -# topology: always load this one, too! -# getoption: probably a good idea, too! -# -# stats: statistics - for gnunet-stats -# traffic: traffic analysis -# fs: file sharing -# chat: broadcast chat (demo-application) -# tbench: benchmark tool for transport performance -# tracekit: GNUnet topology visualization toolkit -# -# The chat, tbench and tracekit protocols are potential security risks -# and have been engineered for testing GNUnet or demonstrating how -# GNUnet works. They should be used with caution. -# -# Using the fs tools for downloading may require the traffic module -# to be loaded! -# -# Default: APPLICATIONS = "advertising topology fs getoption stats traffic" -APPLICATIONS = "advertising topology fs getoption stats traffic" +[Meta] +config-daemon.in_CONF_DEF_DIR = "/etc/" +config-daemon.in_CONF_DEF_FILE = "gnunet.root" +EXPERIMENTAL = NO +ADVANCED = NO +RARE = NO -# Which transport mechanisms are available? Use space-separated list -# of the modules, e.g. "udp smtp tcp". The order is irrelevant, each -# protocol has a build-in cost-factor and this factor determines which -# protocols are preferred. # -# The available transports at this point are udp, tcp, http, smtp, -# tcp6, udp6 and the special 'nat' service. +# General settings # -# Loading the 'nat' and 'tcp' modules is required for peers behind NAT -# boxes that cannot directly be reached from the outside. Peers that -# are NOT behind a NAT box and that want to *allow* peers that ARE -# behind a NAT box to connect must ALSO load the 'nat' module. Note -# that the actual transfer will always be via tcp initiated by the peer -# behind the NAT box. -# -# Usually, the default is just fine for most people. -# Choices are: "udp tcp udp6 tcp6 nat http smtp" -# Default: TRANSPORTS = "udp tcp http nat" +[GNUNETD] +GNUNETD_HOME = "/var/lib/GNUnet" +HELOEXPIRES = 1440 +LOGLEVEL = "WARNING" +LOGFILE = "$GNUNETD_HOME/logs" +KEEPLOG = "0" +PIDFILE = "$GNUNETD_HOME/gnunet.pid" +HOSTS = "$GNUNETD_HOME/data/hosts/" +HOSTLISTURL = "http://gnunet.org/hostlist http://mikael.karlsson.com/hostlist"; +HTTP-PROXY = "" +HTTP-PROXY-PORT = 1080 +APPLICATIONS = "advertising topology fs getoption stats traffic" TRANSPORTS = "udp tcp http nat" - -########################################### -# Module configuration. -# Be VERY careful here, wrong values will -# DEFINITIVELY cause GNUnet to crash. -# Read documentation at -# FIXME: add URI here! # -# Note that everything in this section must -# be without caps (keys and values). -# Not defining any value for any of the -# entries is also likely to not work. -########################################### -[MODULES] - -# Which database should be used? The options -# are "sqstore_sqlite" and "sqstore_mysql". -# Default is "sqstore_sqlite". You must run -# gnunet-update after changing this value! +# Modules # -# In order to use sqstore_mysql, you must configure -# the mysql database, which is non-trivial. -# Read the file doc/README.mysql for how to setup -# mysql. -# The default is "sqstore_sqlite". +[MODULES] sqstore = "sqstore_sqlite" - -# Which topology should be used? The only -# option at the moment is "topology_default". -# -# The default is "topology_default" topology = "topology_default" - -############################################ -# Network configuration -############################################ +# +# Network +# [NETWORK] - -# Which is the client-server port that is used between gnunetd and the -# clients (TCP only). You may firewall this port for non-local -# machines. -# Default: PORT = 2087 PORT = 2087 +INTERFACE = "" +IP = "" +F2F = "$GNUNETD_HOME/friends" +HELOEXCHANGE = YES +TRUSTED = "127.0.0.0/8;" -# Set if GNUnet fails to determine your IP. GNUnet first tries to -# determine your IP by looking at the IP that matches the interface -# that is given with the option INTERFACE. -# Under Windows, specify the ID reported by -# "gnunet-win-tool -n" -# Default: INTERFACE = eth0 -INTERFACE = eth0 - -# If this fails, GNUnet will try to do a DNS lookup on your HOSTNAME, -# which may also fail, in particular if you are on dialup. # -# If both options are not viable for you, you can specify an IP in -# this configuration file. This may be required if you have multiple -# interfaces (currently GNUnet can only work on one of them) or if you -# are behind a router/gateway that performs network address -# translation (NAT). In the latter case, set this IP to the *external* -# IP of the router (!) and make sure that the router forwards incoming -# UDP packets on the GNUnet port (default: 2086) to the dedicated -# GNUnet server in the local network. +# Resource limitations # -# The given example value (127.0.0.1) will NOT work! If you do not know -# what all this means, try without! -# Default is no IP specified. -# IP = 127.0.0.1 - -# If this host is connected to two networks, a private which is not -# reachable from the Internet and that contains GNUnet clients and to -# a public network, typically the Internet (and is this host is thus -# in the position of a router, typically doing NAT), then this option -# should be set to 'NO'. It prevents the node from forwarding HELOs -# other than its own. If you do not know what the above is about, just -# keep it set to YES (which is also the default when the option is not -# given). -# Default is yes: HELOEXCHANGE = YES -HELOEXCHANGE = YES - -# With this option, you can specify which networks are trusted enough -# to connect as clients to the TCP port. This is useful if you run -# gnunetd on one host of your network and want to allow all other -# hosts to use this node as their server. By default, this is set to -# 'loopback only'. The format is the same as for the BLACKLIST. -# Default is: TRUSTED = 127.0.0.0/8; -TRUSTED = 127.0.0.0/8; - - - - - - -###################################### -# Options for load management -###################################### [LOAD] -# In this section you specify how many resources GNUnet is allowed to -# use. GNUnet may exceed the limits by a small margin (network & CPU -# are hard to control directly), but should do a reasonable job to -# keep the average around these values - -# For which interfaces should we do accounting? GNUnet will evaluate -# the total traffic (not only the GNUnet related traffic) and adjust -# its bandwidth usage accordingly. You can currently only specify a -# single interface. GNUnet will also use this interface to determine -# the IP to use. Typical values are eth0, ppp0, eth1, wlan0, etc. -# 'ifconfig' will tell you what you have. Never use 'lo', that just -# won't work. -# Under Windows, specify the ID reported by -# "gnunet-win-tool -n". -# Default is: INTERFACES = eth0 -INTERFACES = eth0 - -# Use basic bandwidth limitation? YES or NO. The basic method (YES) -# notes only GNUnet traffic and can be used to specify simple maximum -# bandwidth usage of GNUnet. Choose the basic method if you don't -# want other network traffic to interfere with GNUnet's operation, but -# still wish to constrain GNUnet's bandwidth usage, or if you can't -# reliably measure the maximum capabilities of your connection. YES -# can be very useful if other applications are causing a lot of -# traffic on your LAN. In this case, you do not want to limit the -# traffic that GNUnet can inflict on your WAN connection whenever your -# high-speed LAN gets used (e.g. by NFS). -# -# The advanced bandwidth limitation (NO) measures total traffic over -# the chosen interface (including traffic by other applications), and -# allows gnunetd to participate if the total traffic is low enough. -# Default is: BASICLIMITING = YES BASICLIMITING = YES +INTERFACES = "" +MAXNETDOWNBPSTOTAL = 50000 +MAXNETUPBPSTOTAL = 50000 +MAXCPULOAD = 50 -# Bandwidth limits in bytes per second. These denote the maximum -# amounts GNUnet is allowed to use. -# Defaults are: -# MAXNETUPBPSTOTAL = 50000 -# MAXNETDOWNBPSTOTAL = 50000 -MAXNETUPBPSTOTAL = 50000 -MAXNETDOWNBPSTOTAL = 50000 - - -# Which CPU load can be tolerated (total, GNUnet will adapt if the -# load goes up due to other processes). A value of 50 means that once -# your 1 minute-load average goes over 50% non-idle, GNUnet will start -# dropping packets until it goes under that threshold again. -# Default is MAXCPULOAD = 50 -MAXCPULOAD = 50 - - - - -########################################### -# Options for the UDP transport layer. -########################################### -[UDP] - -# To which port does GNUnet bind? Default is 2086 and there is usually -# no reason to change that. -PORT = 2086 - -# With this option, you can specify which networks you do NOT want to -# connect to. Usually you will want to filter loopback (127.0.0.1, -# misconfigured GNUnet hosts), virtual private networks, [add a class -# C network here], 192.168.0.0, 172.16.0.0 and 10.0.0.0 (RFC -# 1918). The format is IP/NETMASK where the IP is specified in -# dotted-decimal and the netmask either in CIDR notation (/16) or in -# dotted decimal (255.255.0.0). Several entries must be separated by a -# semicolon, spaces are not allowed. Notice that if your host is on a -# private network like the above, you will have to configure your NAT -# to allow incoming requests and you will want to modify this option. -# The idea behind this option is not to discriminate against NAT users -# but to ensure that hosts only attempt to connect to machines that -# they have a chance to actually reach. Of course, you could also use -# it against known adversaries that have a small IP range at their -# disposal :-) # -# Example (and default): -# 127.0.0.1/8;172.16.0.0/12;192.168.0.0/16;10.0.0.0/255.0.0.0; -BLACKLIST = 127.0.0.1/8;172.16.0.0/12;192.168.0.0/16;10.0.0.0/255.0.0.0; +# Transports +# - -# The MTU to use. Do not use more than your OS -# (and firewall) can support. Typically, your -# network-MTU - 28 is optimal, for ethernet, this -# is 1472, the default. Do not use less than 1200. # -# The default is 1472, which is also used if you specify -# nothing. +# UDP Transport +# +[UDP] +PORT = 2086 +BLACKLIST = "127.0.0.1/8;172.16.0.0/12;192.168.0.0/16;10.0.0.0/255.0.0.0;" MTU = 1472 - -########################################### -# Options for the TCP transport layer. -########################################### +# +# TCP Transport +# [TCP] - -# To which port does GNUnet bind? Default is 2086 and there is usually -# no reason to change that. Make sure that this port does not -# conflict with the port for GNUnet clients (section NETWORK), which -# defaults to 2087. PORT = 2086 +BLACKLIST = "127.0.0.1/8;172.16.0.0/12;192.168.0.0/16;10.0.0.0/255.0.0.0;" -# With this option, you can specify which networks you do NOT want to -# connect to. Usually you will want to filter loopback (127.0.0.1, -# misconfigured GNUnet hosts), virtual private networks, [add a class -# C network here], 192.168.0.0, 172.16.0.0 and 10.0.0.0 (RFC -# 1918). The format is IP/NETMASK where the IP is specified in -# dotted-decimal and the netmask either in CIDR notation (/16) or in -# dotted decimal (255.255.0.0). Several entries must be separated by a -# semicolon, spaces are not allowed. Notice that if your host is on a -# private network like the above, you will have to configure your NAT -# to allow incoming requests and you will want to modify this option. -# The idea behind this option is not to discriminate against NAT users -# but to ensure that hosts only attempt to connect to machines that -# they have a chance to actually reach. Of course, you could also use -# it against known adversaries that have a small IP range at their -# disposal :-) -# Example (and default): -# BLACKLIST = 127.0.0.1/8;192.168.0.0/16;10.0.0.0/255.0.0.0; -BLACKLIST = 127.0.0.1/8;192.168.0.0/16;10.0.0.0/255.0.0.0; - - -############################################### -# Options for NAT transport -############################################### -[NAT] - -# Is this machine behind a NAT that does not allow -# connections from the outside to the GNUnet port? -# (if you can configure the NAT box to allow -# direct connections from other peers, set this -# to NO). Set this only to YES if other peers -# cannot contact you directly via TCP or UDP. -# If you set this to YES, you should also set the -# TCP port to '0' and disable UDP to indicate that you -# cannot accept inbound connections. # -# Default: NO +# NAT +# +[NAT] LIMITED = NO - -########################################## -# IPv6 transports, don't bother unless you -# want to use IPv6. -########################################## - +# +# UDP over IPv6 +# [UDP6] - -# Default port is 2088 and MTU is 1452. PORT = 2088 -# BLACKLIST = MTU = 1452 +BLACKLIST = "" +# +# TCP over IPv6 +# [TCP6] - -# Default port is 2088 and MTU is 1440. PORT = 2088 -# BLACKLIST = +MTU = 1440 +BLACKLIST = "" -[HTTP] - -# Default port is 1080 and MTU is 1400. -PORT = 1080 -# BLACKLIST = - - -############################################### -# Options for SMTP transport -############################################### +# +# SMTP +# [SMTP] - -# E-mail address to use to receive messages. Do not specify anything -# if you do not want to allow SMTP as a receiver protocol; you can -# still *send* email to establish connections in that case. Example: -# EMAIL = [EMAIL PROTECTED] -# EMAIL = - -# MTU for the E-mail. How large should the E-mails be that we send -# out? Default is 65536 (bytes). -MTU = 65536 - -# Port of the SMTP server for outbound mail. If not specified, the -# TCP/SMTP entry from /etc/services is consulted. Default is 25. +EMAIL = "[EMAIL PROTECTED]" +MTU = 65535 PORT = 25 - -# Hostname of the SMTP server. Default is "localhost". -SERVER = localhost - -# Hostname of the sender host to use in the HELO message of the SMTP -# protocol (not to be confused with the HELO in the GNUnet p2p -# protocol). Pick a hostname that works for your SMTP server. This -# hostname has nothing to do with the hostname of the SMTP server or -# your E-mail sender address (though those names should work in most -# cases). In fact, it often does not even have to exist as a real -# machine. Example: "myhost.example.com" -SENDERHOSTNAME = myhost.example.com - -# Filter-line to use in the E-mail header. This filter will be -# included in the GNUnet-generated E-mails and should be used to -# filter out GNUnet traffic from the rest of your E-mail. Make sure -# that the filter you choose is highly unlikely to occur in any other -# message. -# -# Examples: -# FILTER = "X-mailer: myGNUnetmail" -# FILTER = "Subject: foobar5252" +SERVER = "localhost" +SENDERHOSTNAME = "myhost.example.com" FILTER = "X-mailer: 590N" +PIPE = "/tmp/gnunet.smtp" -# Name of the pipe via which procmail sends the filtered E-mails to -# the node. Default is /tmp/gnunet.smtp -PIPE = /tmp/gnunet.smtp - - - - - -################################################ -# Options for anonymous filesharing (AFS). -################################################ -[FS] - -# How much disk space (MB) is GNUnet allowed to use for file -# sharing? This does not take indexed files into account, only the -# space directly used by GNUnet is accounted for. GNUnet will gather -# content from the network if the current space-consumption is below -# the number given here (and if content migration is allowed below). # -# IMPORTANT: -# Note that if you change the quota, you need to run gnunet-convert, -# otherwise your databases will be inconsistent and gnunetd will -# refuse to work. Default is 1024 (1 GB) -QUOTA = 1024 +# HTTP +# +[HTTP] +PORT = 1080 +BLACKLIST = "127.0.0.1/8;172.16.0.0/12;192.168.0.0/16;10.0.0.0/255.0.0.0;" -# Should we participate in content migration? If you say yes here, -# GNUnet will migrate content to your server, and you will not be able -# to control what data is stored on your machine. This option has -# advantages and disadvantages. # -# If you activate it, you can claim for *all* the non-indexed (-n to -# gnunet-insert) content that you did not know what it was even if an -# adversary takes control of your machine. +# Applications # -# If you do not activate it, it is obvious that you have knowledge of -# all the content that is hosted on your machine and thus can be -# considered liable for it. + # -# So if you think that the legal system in your country has gone -# postal, you may want to set it to "NO" and make sure that the -# content you put on your machine does not get you into too much -# trouble if an adversary takes control of your machine. If you think -# that you're safe if you host content that you don't know anything -# about (like an ISP) or that you don't have to fear prosecution -# no-matter-what, turn it to YES, which will also improve GNUnet's -# performance and thereby your results. +# Anonymous file sharing # -# Note that as long as the adversary is not really powerful (e.g. can -# not take control of your machine), GNUnet's build-in anonymity -# mechanisms should protect you from being singled out easily. -# -# Currently, activating active migration can cause some problems when -# the database is getting full (gdbm reorganization can take very, -# very long and make GNUnet look like it hangs for that time). Thus if -# you turn it on, you may want to disable it after you hit the -# quota. A better content management system should solve this problem -# in the near future... [at the time of GNUnet 0.6.1c, the MySQL -# database module already works well even if the db is full.] -# Default is YES. +[FS] +QUOTA = 1024 +ANONYMITY_RECEIVE = 0 +ANONYMITY_SEND = 0 ACTIVEMIGRATION = YES +DIR = "$GNUNETD_HOME/data/fs/" +INDEX-DIRECTORY = "$GNUNETD_HOME/data/shared/" +INDEX-QUOTA = 8192 -# Where to store the FS related data (content, etc)? -DIR = $GNUNETD_HOME/data/fs/ - -# Where to store indexed files (NEW!) -# Note that you MUST not copy files directly to this -# directory. gnunet-insert (or gnunet-gtk) will copy -# the files that you index to this directory. With the -# -l option you instead create a link (if gnunetd and -# gnunet-insert run on the same machine) instead. # -# The QUOTA option does NOT apply for this directory. -# To limit how much can be placed in this directory -# set the option INDEX-QUOTA. Files that are merely -# linked do not count towards the quota. +# MySQL # -# If you uncomment this option gnunetd will refuse -# content indexing requests (insertion will still be -# possible). -# -# Note that files indexed with GNUnet before Version -# 0.6.2 were not moved/linked to this directory. But that -# should not cause any immediate problems (the files -# will continue to be downloadable). What will be -# impossible is unindexing these files with -# gnunet-delete and GNUnet >= 0.6.2. -# Default is $GNUNETD_HOME/data/shared/ -INDEX-DIRECTORY = $GNUNETD_HOME/data/shared/ - -# How many (parallel) threads should a given gnunet-download (or -# gnunet-gtk) process run? (this limits the amount of parallelism -# used in the FSUI library). Smaller values reduce memory and CPU -# requirements. Very large values will not be useful since even if -# that much parallelism is theoretically possible, the local node may -# not be able to route that many parallel requests anyway. -# Default: 32 -POOL = 32 - -####################################### -# MySQL specific options. -####################################### - [MYSQL] - -# If you suffer from too slow index/insert speeds, -# you might try to set this to YES for a small -# efficiency boost. If you run into any trouble -# because of it, you're on your own. -# Default: NO DELAYED = NO - -####################################### -# TESTBED (experimental!) -####################################### - +# +# GNUnet Testbed +# [TESTBED] - -# Where should we register the testbed service? -# Default is "http://gnunet.org/testbed/"; REGISTERURL = "http://gnunet.org/testbed/"; - -# Is the testbed operator allowed to load and -# unload modules? (somewhat of a security risk!) -# Default is NO. ALLOW_MODULE_LOADING = NO +UPLOAD-DIR = "$GNUNETD_HOME/testbed" +LOGIN = "2087" -# Where should file-uploads go? -# Default is $GNUNETD_HOME/testbed -UPLOAD-DIR = $GNUNETD_HOME/testbed - -# Login-name for SSH-tunnel (for secure testbed -# connections). Without login name the testbed-server -# will try to make a direct TCP connection to the -# application port (default: 2087). -# LOGIN = - -######################################## -# GAP options -######################################## - +# +# GAP +# [GAP] -# Size of the routing table. -# Default: 65536 TABLESIZE = 65536 -######################################## -# DHT (experimental) -######################################## - +# +# DHT +# [DHT] - -# Number of buckets to use (determines memory requirements) -# Default (and maximum) is 160. BUCKETCOUNT = 160 - -# Amount of memory (in bytes) to use for the master table -# (table that caches table-to-peer mappings). -# Default is 65536. MASTER-TABLE-SIZE = 65536 - - Property changes on: GNUnet/contrib/gnunet.root ___________________________________________________________________ Name: svn:eol-style + LF Modified: GNUnet/contrib/gnunet.user =================================================================== --- GNUnet/contrib/gnunet.user 2005-06-28 18:01:38 UTC (rev 1111) +++ GNUnet/contrib/gnunet.user 2005-06-28 18:27:11 UTC (rev 1112) @@ -1,164 +1,74 @@ -# This is the USER configuration for your GNUnet node. Copy this file to -# "~/.gnunet/gnunet.conf". -# For any other location, you must tell every GNUnet application -# that you start where this file is. (option -c FILENAME). # +# Automatically generated by gnunet-setup # -################################################# +# +# User specific configuration +# -############################################### -# General client options... -############################################### -[GNUNET] -# This line gives the directory where GNUnet is putting -# user-specific files (such as pseudonyms). Typically, -# GNUnet should not put more than a few of MB there. # -# Default is GNUNET_HOME = ~/.gnunet -GNUNET_HOME = ~/.gnunet +# Meta-configuration +# +[Meta] +config-client.in_CONF_DEF_DIR = "~/.gnunet/" +config-client.in_CONF_DEF_FILE = "gnunet.user" +ADVANCED-CLIENT = NO +RARE-CLIENT = NO -# Loglevel. What kinds of (debug) output should be printed? You can -# use NOTHING, FATAL, ERROR, FAILURE, WARNING, MESSAGE, INFO, DEBUG, -# CRON or EVERYTHING (which print more and more messages in this order). -# Default is WARNING which is usually enough to let you know if there -# is any problems. -LOGLEVEL = WARNING +# +# General settings +# +[GNUNET] +GNUNET_HOME = "~/.gnunet" +LOGLEVEL = "WARNING" +LOGFILE = "$GNUNET_HOME/logs" -# For clients that want to fork a gnunetd process, which config -# file should be used? (option -c will not be used if this option -# is not set, this is the default). -# EXAMPLE: GNUNETD-CONFIG = "~/.gnunet/gnunetd.conf" - -# Where to write the messages? Leave the entry unspecified (as -# default) to make the clients print their messages to stderr. -# Default is unspecified (stderr). -#LOGFILE = $GNUNET_HOME/logs - - -############################################### -# Network options for the clients... -############################################### +# +# Network options for the clients +# [NETWORK] -# Port to use to talk to gnunetd, default is 2087 CLIENT-PORT = 2087 +HOST = "localhost" -# On which machine runs gnunetd (for clients) This is equivalent to -# the -H option. Default is localhost. -HOST = localhost - - - - -################################################ -# Options for filesharing (FS). -################################################ +# +# Options for filesharing (FS) +# [FS] - -# Default priority for locally inserted content INSERT-PRIORITY = 50 - -# Default expiration time for locally inserted content, in days -# Default is 36500 (100 years) INSERT-EXPIRATION = 36500 - -# How long should gnunet-search try to get an answer to a query before -# timing out (in seconds). Default is "3000", which should be enough -# for pretty much anything. Use 0 for no timeout. -SEARCHTIMEOUT = 3000 - -# Anonymity level for receiving data (default). +SEARCHTIMEOUT = 3000 ANONYMITY-RECEIVE = 1 - -# Anonymity level for sharing data (default). ANONYMITY-SEND = 1 - -# Default limit for the number of search results (0 for unlimited). MAXRESULTS = 0 - -# Default timeout for searches -SEARCHTIMEOUT = 300 - -# Specify which additional extractor libraries should be used. -# gnunet-insert uses libextractor to extract keywords from files. -# libextractor can be dynamically extended to handle additional file -# formats. If you want to use more than the default set of extractors, -# specify additional extractor libraries here. The format is -# [[-]LIBRARYNAME[:[-]LIBRARYNAME]*] The default is to use filenames -# and to break larger words at spaces (and underscores, etc.). This -# should be just fine for most people. The - before a library name -# indicates that this should be executed last and makes only sense for -# the split-library. -# Default is libextractor_filename:-libextractor_split:-libextractor_lower:-libextractor_thumbnail -EXTRACTORS = libextractor_filename:-libextractor_split:-libextractor_lower:-libextractor_thumbnail - -# Where to download files to (by default)? -# Default is /tmp/gnunet-downloads/ -DOWNLOADDIR = /tmp/gnunet-downloads/ - -# Disable symlinking. When set to YES, GNUnet will always make -# a copy of the file when files are indexed. The default is to -# try to use a symbolic link (if possible). -# Note that you should NEVER, NEVER simply delete the .gnunet -# directory if this is set to 'NO', since all inserted files -# will have been moved into that directory and replaced with -# symbolic links. So if you were to remove ~/.gnunet, you will -# loose those files unless you first run gnunet-delete to undo -# the symlinking! -# It is much more (space)-efficient to set this to NO, -# but you need to know what you're doing. This is why the -# default is 'YES'. +SEARCHTIMEOUT = 3000 +EXTRACTORS = "libextractor_filename:-libextractor_split:-libextractor_lower:-libextractor_thumbnail" +DOWNLOADDIR = "/tmp/gnunet-downloads/" DISABLE-SYMLINK = YES - -################################################# +# # Default options for gnunet-gtk -################################################# +# [GNUNET-GTK] +GNUNETD-CONFIG = "/etc/gnunetd.conf" -# Path to the gnunet.conf file for gnunetd (for -# forking gnunetd by gnunet-gtk) -# default: not specified! -# GNUNETD-CONFIG = /etc/gnunetd.conf - - -########################################## +# # Defaults for gnunet-chat -########################################## +# [GNUNET-CHAT] +NICK = "my nickname" -# You can specify your nickname here and thus avoid having to pass it -# with -n NICK at the command-line. The default is empty. # -# NICK = "my nickname" - -########################################## # Defaults for gnunet-tracekit -########################################## +# [GNUNET-TRACEKIT] - -# How long to wait for replies (in seconds)? (default: 30) -WAIT = 30 - -# How many hops should the trace go? (default: 5) -HOPS = 5 - -# How important is the trace message? (default: 1000) +WAIT = 30 +HOPS = 5 PRIORITY = 1000 +FORMAT = 2 -# Output format, 0 is human readable, 1 is dot, -# 2 is vcg (default: 2) -FORMAT = 2 - - +# +# Defaults for gnunet-testbed +# [GNUNET-TESTBED] - -# Port used internally by gnunet-testbed -# (for the IPC in the gnunet-testbed shell). -# The default is 2089. PORT = 2089 - -# At which URL does the registration software -# run? -# Default is http://ovmj.org/GNUnet/testbed/ REGISTERURL = "http://ovmj.org/GNUnet/testbed/"; Property changes on: GNUnet/contrib/gnunet.user ___________________________________________________________________ Name: svn:eol-style + LF _______________________________________________ GNUnet-SVN mailing list [email protected] http://lists.gnu.org/mailman/listinfo/gnunet-svn
