Florian Schüttler wrote: > If it is a v2 card as you mentioned earlier you should try using GnuPG > 1.4.10. > I had pretty much the same issues with a PC/SC reader (ReinerSCT cyberjack > ecom plus) on Debian Lenny (1.4.9-3+lenny1) until I tried 1.4.10 with which > there were no problems, except that I did not get the keypad to work yet.
Hey, that's odd. I'm 100% sure I mentioned it was a v1 card. Must have deleted that when I rewrote a part for clarity (the irony :). It is a cut-up v1 card to fit in the ID-000 (SIM card) size. My v2 card is on back order. Since I'm replying anyway, let me mention two more things: 1) It is not always necessary to remove and re-insert the reader and card after an error. Not sure when it is and isn't. 2) The data sent in error by the card when a "VERIFY" command is given for the failing operations is the ATR response for the OpenPGP card. It's been quite a while since I had a look at ISO 7816 based things, but I did notice this. Peter. -- I'm using the GNU Privacy Guard (GnuPG) in combination with Enigmail. You can send me encrypted mail if you want some privacy. My key is available at http://wwwhome.ewi.utwente.nl/~lebbing/pubkey.txt _______________________________________________ Gnupg-users mailing list [email protected] http://lists.gnupg.org/mailman/listinfo/gnupg-users
