On 30 January 2010, at 02:51, Chris Ruff wrote:

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

On 1/29/10 9:23 PM, taurus wrote:

On 29 January 2010, at 00:22, Chris Ruff wrote:

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512



Gpg does not recognize my fellowship card;
~ xxx$ gpg --card-status
gpg: selecting openpgp failed: Card error
gpg: OpenPGP card not available: Card error
Reader 01: Gemplus GemPC Twin 00 00

Is that a new OpenPGP card (2.0)?


No, it is a v1.0 Fellowship card.

Only the Macbook Pro is new.

On the Mac (10.5.8) I've found that when I receive this error to kill
the scdaemon and reinsert the reader/card.

$ killall -u <username> scdaemon #usually has to be entered 2-3x to
kill it

Then I'm able to reinsert and perform a 'gpg --card-status'

Hope this helps.


I kill scdaemon several times but error persists.
gpg: selecting openpgp failed: Card error
gpg: OpenPGP card not available: Card error


Thank you,




Have you run 'pcsctest'?

pcsctest is fine. Werner says the Gemplus readers are buggy, they don't support extended
length APDUs.


$ pcsctest

MUSCLE PC/SC Lite Test Program

Testing SCardEstablishContext    : Command successful.
Testing SCardGetStatusChange
Please insert a working reader   : Command successful.
Testing SCardListReaders         : Command successful.
Reader 01: Gemplus GemPC Twin 00 00
Enter the reader number          : 01
Waiting for card insertion
                                : Command successful.
Testing SCardConnect             : Command successful.
Testing SCardStatus              : Command successful.
Current Reader Name              : Gemplus GemPC Twin 00 00
Current Reader State             : 0x34
Current Reader Protocol          : 0x1
Current Reader ATR Size          : 20 (0x14)
Current Reader ATR Value : 3B FA 13 00 FF 81 31 80 45 00 31 C1 73 C0 01 00 00 90 00 B1
Testing SCardDisconnect          : Command successful.
Testing SCardReleaseContext      : Command successful.
Testing SCardEstablishContext    : Command successful.
Testing SCardGetStatusChange
Please insert a working reader   : Command successful.
Testing SCardListReaders         : Command successful.
Reader 01: Gemplus GemPC Twin 00 00



Thank you.




_______________________________________________
Gnupg-users mailing list
[email protected]
http://lists.gnupg.org/mailman/listinfo/gnupg-users

Reply via email to