Hi, I'm not sure if this is the right list for this question, but since Werner is on this list and given his reputation, I'd give it a shot.
I'm trying to understand how the card-reset procedure works on OpenPGP 2.0 cards. No particular need, just because I'm curious. >From what I understand, the procedure first locks the User PIN by sending 4 VERIFY-commands with the same (wrong) PINcode. It next locks the Admin PIN using a similar procedure. But then: > scd apdu 00 e6 00 00 D[0000] 90 00 .. OK > scd apdu 00 44 00 00 D[0000] 90 00 .. OK According to my understanding, this will ACTIVATE FILE, and next TERMINATE DF. While the spec seems to indicate the reverse should be done: TERMINATE DF: > The command puts the applica- > tion into the termination state. > After termination only SELECT > FILE and ACTIVATE FILE are > available Either way, the procedure (with first ACTIVATE and next TERMINATE) seems to work, I just don't understand how... Thx, Niels _______________________________________________ Gnupg-users mailing list [email protected] http://lists.gnupg.org/mailman/listinfo/gnupg-users
