El día martes, marzo 13, 2018 a las 06:54:25p. m. +0900, NIIBE Yutaka escribió:
>
> > What can I do?
> [...]
> > Identiv uTrust 3512 SAM slot Token
>
> I believe that GnuPG's in-stock driver just works fine with this reader,
> because it runs at TPDU level exchange.
>
> Please try without PC/SC-lite, and see how it goes.
>
> With following ~/.gnupg/scdaemon.conf, you can get debug log.
>
> ================ ~/.gnupg/scdaemon.conf
> verbose
> verbose
> debug-level guru
> debug-all
> debug-ccid-driver
> log-file /some/where/scdaemon-debug.log
> ================
I moved the /usr/local/sbin/pcscd out of the way. The scdaemon writes
the following log:
2018-03-13 15:28:10 scdaemon[2508.802016000] listening on socket
'/home/guru/.gnupg-ccid/S.scdaemon'
2018-03-13 15:28:10 scdaemon[2508.802017900] manejador del descriptor -1
iniciado
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 -> OK GNU Privacy
Guard's Smartcard server ready
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 <- GETINFO socket_name
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 -> D
/home/guru/.gnupg-ccid/S.scdaemon
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 -> OK
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 <- OPTION
event-signal=31
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 -> OK
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 <- SERIALNO
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: enter: apdu_open_reader:
portstr=(null)
2018-03-13 15:28:10 scdaemon[2508.802017900] pcsc_establish_context failed: no
service (0x8010001d)
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: leave: apdu_open_reader =>
slot=-1 [pc/sc]
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 -> ERR 100696144
Operation not supported by device <SCD>
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 <- RESTART
2018-03-13 15:28:10 scdaemon[2508.802017900] DBG: chan_7 -> OK
Is there some config missing so that scdaemon opens directly the reader?
What does 'pcsc_establish_context failed' mean?
Thanks for your help
matthias
--
Matthias Apitz, ✉ [email protected], ⌂ http://www.unixarea.de/ 📱
+49-176-38902045
_______________________________________________
Gnupg-users mailing list
[email protected]
http://lists.gnupg.org/mailman/listinfo/gnupg-users
