New question #698068 on gnusim8085: https://answers.launchpad.net/gnusim8085/+question/698068
MVI A, 80H ;Initialize 8255, port A and port B OUT 83H ;in output mode START: MVI A, 09H OUT 80H; PA ;Send data on PA to glow R1 and R2 MVI A, 24H OUT 81H; PB ;Send data on PB to glow G3 and G4 MVI C, 28H ;Load multiplier count (40ıο) for delay CALL DELAY ;Call delay subroutine MVI A, 12H OUT 81H; PA ;Send data on Port A to glow Y1 and Y2 OUT 81H; PB ;Send data on port B to glow Y3 and Y4 MVI C, 0AH ;Load multiplier count (10ıο) for delay CALL DELAY ; Call delay subroutine MVI A, 24H OUT 80H; PA ;Send data on port A to glow G1 and G2 MVI A, 09H OUT 81H; PB ;Send data on port B to glow R3 and R4 MVI C, 28H ;Load multiplier count (40ıο) for delay CALL DELAY ;Call delay subroutine MVI A, 12H MVI C, 0AH ;Load multiplier count (10ıο) for delay CALL DELAY ;Call delay subroutine JMP START DELAY: LXI D ;Load count to give 0.5 sec delay BACK: DCX D;Decrement counter MOV A, D ORA E;Check whether count is 0 JNZ BACK;If not zero, repeat DCR C;Check if multiplier zero, otherwise repeat JNZ DELAY RET;Return to main program ONCE I RUN THIS PROGRAM IT KEEP SHOWS THAT OPCODE NEED AN USER ARGUMENT AND ALSO ASSEMBLING ABORTED. NEED HELP WITH THIS . THANK YOU. -- You received this question notification because your team GNUSim8085 developers is an answer contact for gnusim8085. _______________________________________________ Mailing list: https://launchpad.net/~gnusim8085-devel Post to : [email protected] Unsubscribe : https://launchpad.net/~gnusim8085-devel More help : https://help.launchpad.net/ListHelp
