Hello list, I can't seen to get my host (debian sarge running custom 2.6.7 kernel) to recognize my Ipaq (H3835 running familiar 0.7.2). When I connect the device, it goes in dmesg (I have USB debug on):
hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501 hub 1-0:1.0: port 3 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: port 3 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j � CONNECT But the usb device doesn't show up. I have no problems with a 2.4 kernel neither with other USB gear. Here's lsmod: Module � � � � � � � � �Size �Used by ipaq � � � � � � � � � 11156 �0 usbserial � � � � � � �26988 �1 ipaq nvidia � � � � � � � 2074600 �14 p80211 � � � � � � � � 33808 �0 eth1394 � � � � � � � �20360 �0 ohci1394 � � � � � � � 34436 �0 ieee1394 � � � � � � �106936 �2 eth1394,ohci1394 tg3 � � � � � � � � � �81924 �0 ehci_hcd � � � � � � � 41476 �0 usbcore � � � � � � � 120672 �5 ipaq,usbserial,ehci_hcd intel_agp � � � � � � �19484 �1 agpgart � � � � � � � �33192 �2 intel_agp evdev � � � � � � � � � 9472 �0 fat � � � � � � � � � �44480 �0 ide_cd � � � � � � � � 41988 �0 cdrom � � � � � � � � �39072 �1 ide_cd Any idea how I can get my system to 'see' the Ipaq, since it's a real pain not to be able to connect. Thanks, joost DISCLAIMER This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify A.S.T.R.I.D. nv/sa immediately and then delete this e-mail.
