Hello,
We are trying to use GoBgp running on a server with OVS used for datapath
routing. GoBgp is run on an internal port created on the ovs.
We are peering this with Cisco BGP running on Cisco Nexus switch. The
peering is eBGP with basic neighbor config of neighbor-ip and remote-as.
Global config just has Ip address and global AS. The uplink of the server
is an L2 link to the Switch and the Bgp is run on an virtual interface on
the Switch side.
2 Issues we are seeing:
1) If the physical L2 link goes down between the server and the switch. Bgp
shows as Established even after 2 hours.
2) If the internal port on which GoBgp goes down/comes back up the state
remains unchanged.
Is there any non default config that needs to be used for this to work ?
Your help is much appreciated.
--
Thank you
Abhinandan
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
gobgp-devel mailing list
gobgp-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gobgp-devel
