Let me take that back ... everything works perfectly, you helped me out a lot and basically created the perfect compare tool!
Thanks a bunch! On Monday, August 27, 2012 10:12:02 PM UTC-4, kasimir wrote: > > Quite close, thanks first of all ... Only thing missing now is, I want it > to start with just the A Column (the areachart) graphed as default and with > no conversion at that point. As soon as the user selects another Column (or > more than 1), than the data should be converted. > > So basically something like: > - if (any column selected, except column A) > => data conversion true > - else > => data conversion false > > Sorry, I wouldn't know how to explain it better, but this should do it :) > > Much appreciated > > On Monday, August 27, 2012 6:26:15 PM UTC-4, asgallant wrote: >> >> Let me see if I have this straight: for the first part, you want to have >> one column that always gets graphed and that users can't turn off, and if >> this is the only column, you want it graphed as is without any conversion - >> correct? This is doable. You're second request is also doable, we just >> have to change to using a ComboChart and define the types for each series. >> See both in action: http://jsfiddle.net/asgallant/EVQP2/5/ >> >> On Monday, August 27, 2012 5:35:46 PM UTC-4, kasimir wrote: >>> >>> Big thanks! After fiddling around and getting familiar with the code I >>> was able to adjust your solution to my issue and it works great, just needs >>> some fine-tuning. >>> >>> Now I only have 2 questions and hope you could help me out with it based >>> on your solution in the other thread. >>> Question 1 (High priority): At this moment all the data gets >>> recalculated to compare it against each other from the get go. Is there a >>> way that, when I set the initState to just one value (in my case Column A) >>> that it just shows the original data without calculating and as soon as >>> someone adds at least one Column from the Category Filter, the data will be >>> calculated so that they can be compared relative to each other. >>> => Follow up: Is there a way to not show Column A in the Category >>> Filter, since I always want it visible as default data. >>> >>> Question 2 (Low priority): Is it possible that Column A (by default >>> always visible) is an AreaChart and the other Colums (B, C, D, E etc...) >>> when selected will be a LineChart? >>> >>> Would be great if you could help me out with this and to keep it simple >>> lets use http://jsfiddle.net/asgallant/EVQP2/ as basis and then I will >>> be able to adapt the solution to my chart. >>> >>> Thanks a bunch! >>> >>> On Friday, August 17, 2012 2:21:12 PM UTC-4, asgallant wrote: >>>> >>>> I helped someone else do something similar recently (see this >>>> thread<https://groups.google.com/forum/#!msg/google-visualization-api/oaVQYRmTWKg/cBARJyn5MXYJ>). >>>> >>>> That example is a bit more complicated than what you are asking here >>>> (they >>>> also wanted to be able to add and remove columns from the chart using >>>> CategoryFilter controls), but should give you a good idea of what’s >>>> possible. >>>> >>>> On Friday, August 17, 2012 1:32:13 PM UTC-4, kasimir wrote: >>>>> >>>>> Thanks for the reply, >>>>> I would like to compare the data on a relative basis (%), similar like >>>>> two (or more) stocks can be compared in Google Finance in a specified >>>>> timeframe where at t=0 both data-value are 0% and from there on the >>>>> performance can be compared. >>>>> Here is an example from Google Finance where the stocks of Google (in >>>>> red) is compared against Apple (in blue) in a time-frame of 1 month: >>>>> >>>>> http://www.google.com/finance?chdnp=1&chdd=1&chds=1&chdv=1&chvs=Linear&chdeh=0&chfdeh=0&chdet=1345233600000&chddm=8993&chls=IntervalBasedLine&cmpto=NASDAQ:GOOG&cmptdms=0&q=NASDAQ:AAPL&ntsp=0 >>>>> >>>>> Now I would like to use my own data and compare that to another >>>>> dataset or even compare my data against a stock. >>>>> >>>>> I'm asking because I have written a piece of software in PHP which >>>>> tracks performance data of companies and clients which is then visualized >>>>> in a google line chart, but it would be great to compare the data against >>>>> each other or against other market relevant data (like stocks or market >>>>> indexes) in a relative way. >>>>> >>>>> Hope I'm not the only one who can use this? :) >>>>> >>>>> On Thursday, August 16, 2012 11:29:50 PM UTC-4, asgallant wrote: >>>>>> >>>>>> What you want is most likely possible, but it depends on exactly how >>>>>> you want to compare the data. The chart's won't do everything for you >>>>>> in >>>>>> many cases, but you should be able to write javascript to format the >>>>>> data >>>>>> however you need for a given method of comparison. >>>>>> >>>>>> On Thursday, August 16, 2012 8:19:54 PM UTC-4, kasimir wrote: >>>>>>> >>>>>>> I have looked around but couldn't find an answer. >>>>>>> >>>>>>> I use a line-chart which gets its data from an XML file (updated >>>>>>> daily with date and a value per entry) and this works great. >>>>>>> Now my question, is there a way two data sources can be compared >>>>>>> against each other on a relative basis, kinda like how its done at >>>>>>> Google >>>>>>> Finance when you compare one stock against an other, where the chart >>>>>>> turns >>>>>>> relative and compares the performance? >>>>>>> >>>>>>> Also is there a way that my data source can be compared with the Dow >>>>>>> Jones (for example) on a relative basis? >>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "Google Visualization API" group. To view this discussion on the web visit https://groups.google.com/d/msg/google-visualization-api/-/Fp4sNf5EsT4J. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/google-visualization-api?hl=en.
