I borrowed that connector configuration from a website I came across. I'm not sure why port=0 either. If I put more research into the NIO connector I could probably find out. Why don't you try adding the lines,
enableLookups="false" scheme="http" to the NIO connector configuration in the server.xml file that I gave you earlier. As far as accessing the ajp service using http://localhost:8009/servlet, that will not work. Your browser uses the http protocol and the 8009 port is being serviced by the ajp protocol. You should still have your connector using the http protocol configured to listen on port 8081. Hopefully the scheme line above will help the NIO connector communicate back to Apache. On Feb 20, 4:45 pm, Fran <[email protected]> wrote: > I test your config, dablack, but I cant connect to the servlet. > With this config I cant access not even to:http://localhost:8009/servlet > that is tomcat directly without apache > > On 20 feb, 23:36, Fran <[email protected]> wrote: > > > I cant undestand why this config: > > > <Connector protocol="AJP/1.3" port="0" channelNioSocket.port="8009" > > channelNioSocket.maxThreads=" > > 150" > > channelNioSocket.maxSpareThreads="50" > > channelNioSocket.minSpareThreads="25" > > channelNioSocket.bufferSize="16384" /> > > > Why port 0 ? > > > 2010/2/20 dablack <[email protected]> > > > > Fran, > > > > I'm really not an expert on setting up the connection between Apache > > > and Tomcat but I believe that the connections only operate in two > > > protocols: http or ajp. NIO is a Tomcat connector that can communicate > > > in either http or ajp. Because of that, I don't see any reason that > > > the Apache mod_jk connector module couldn't communicate with the NIO > > > connector. Since I don't use an NIO connector I could be wrong, but > > > that is the way I see it. As a starting point, try these > > > configurations: > > > > server.xml > > > > <Connector protocol="AJP/1.3" port="0" channelNioSocket.port="8009" > > > channelNioSocket.maxThreads="150" > > > channelNioSocket.maxSpareThreads="50" > > > channelNioSocket.minSpareThreads="25" > > > channelNioSocket.bufferSize="16384" /> > > > > (You seem to want to use port 8081 which should be fine, but the > > > standard ajp port is 8009. However, I wouldn't put it on port 8081 if > > > you are already using that port for another protocol such as http.) > > > > httpd.conf > > > > LoadModule jk_module modules/mod_jk.so > > > JkWorkersFile conf/workers.properties > > > JkLogFile /var/log/httpd/mod_jk.log > > > JkLogLevel info > > > JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" > > > JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories > > > JkRequestLogFormat "%w %V %T" > > > JkMount /*.svc ajp13 > > > > (For the JkMount I use *.svc because I use the svc extension for my > > > GWT service target to differentiate service points from other files.) > > > > (For example, in my web.xml file I will map my service something like > > > this to use the svc extension: > > > <servlet> > > > <servlet-name>MyService</servlet-name> > > > <servlet-class>com.mysite.server.MyServiceImpl</servlet-class> > > > </servlet> > > > <servlet-mapping> > > > <servlet-name>MyService</servlet-name> > > > <url-pattern>/MyService.svc</usr-pattern> > > > </servlet-mapping> > > > > And in my GWT code I create my service target like this: > > > > target.setServiceEntryPoint( GWT.getModuleBaseURL() + > > > "MyService.svc" ); > > > > I did this because I had troubles with the 'JkMount /* ajp13' entry, > > > but when I used /*.svc the problems cleared up.) > > > > workers.properties > > > > workers.tomcat_home=/usr/tomcat/apache-tomcat-6.0.16 > > > workers.java_home=/usr/java/jdk1.6.0_06 > > > worker.list=ajp13 > > > worker.ajp13.port=8009 > > > worker.ajp13.host=localhost > > > worker.ajp13.type=ajp13 > > > worker.ajp13.lbfactor=1 > > > worker.loadbalancer.type=lb > > > worker.loadbalancer.balance_workers=ajp13 > > > > (Of course, match the ajp port in the workers.property file to the > > > port you define in the server.xml file. Also, if your Tomcat is not on > > > the same server as your Apache you will need to change the localhost > > > host entry to the correct host URL.) > > > > I hope this helps. > > > > On Feb 20, 12:51 pm, Fran <[email protected]> wrote: > > > > Bad notices. > > > > > This dude has same problem that me and he was answered that mod_jk > > > > dont support NIO > > > > > http://www.mail-archive.com/[email protected]/msg67701.html > > > > > :( > > > > > On 20 feb, 19:13, Fran <[email protected]> wrote: > > > > > > Here the error when I change the protocol of > > > > > protocol="org.apache.coyote.http11.Http11NioProtocol" to > > > > > protocol="AJP/ > > > > > 1.3" > > > > > > [error] jk_ajp_common.c (1962): (worker1) Tomcat is down or refused > > > > > connection. No response has been sent to the client (yet) > > > > > [error] jk_ajp_common.c (2466): (worker1) connecting to tomcat failed. > > > > > > On 20 feb, 19:04, Fran <[email protected]> wrote: > > > > > > > Should be due to protocol. > > > > > > My messenger seems that need NIO protocol but if I put the NIO > > > > > > protocol MOD_JK cant conect apache with tomcat > > > > > > > If I use this tomcat config, mod_jk cant conect apache with tomcat. > > > > > > > <Connector > > > > > > connectionTimeout="20000" > > > > > > port="8081" > > > > > > protocol="org.apache.coyote.http11.Http11NioProtocol" > > > > > > maxThreads="5" > > > > > > acceptorThreadCount="2" > > > > > > redirectPort="8443" > > > > > > socket.directBuffer="false" /> > > > > > > > If I use the last tomcat config, tomcat cant execute the servlet. > > > > > > This is the error log: > > > > > > > GRAVE: Error, processing connection > > > > > > java.lang.IndexOutOfBoundsException > > > > > > at java.io.BufferedInputStream.read(Unknown Source) > > > > > > at > > > org.apache.jk.common.ChannelSocket.read(ChannelSocket.java:620) > > > > > > at > > > org.apache.jk.common.ChannelSocket.receive(ChannelSocket.java:577) > > > > > > at > > > > org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java: > > > > > > 685) > > > > > > at org.apache.jk.common.ChannelSocket > > > > > > $SocketConnection.runIt(ChannelSocket.java:889) > > > > > > at org.apache.tomcat.util.threads.ThreadPool > > > > > > $ControlRunnable.run(ThreadPool.java:690) > > > > > > at java.lang.Thread.run(Unknown Source) > > > > > > > On 20 feb, 18:49, Fran <[email protected]> wrote: > > > > > > > > I am configuring mod_jk > > > > > > > > For tomat, in server.xml : > > > > > > > > <Connector > > > > > > > connectionTimeout="20000" > > > > > > > port="8081" > > > > > > > protocol="AJP/1.3" > > > > > > > maxThreads="5" > > > > > > > acceptorThreadCount="2" > > > > > > > redirectPort="8443" > > > > > > > socket.directBuffer="false" /> > > > > > > > > For apache, in httpd.conf : > > > > > > > > <IfModule mod_jk.c> > > > > > > > JkWorkersFile "/etc/httpd/conf/workers.properties" > > > > > > > JkLogFile "/etc/httpd/logs/mod_jk.log" > > > > > > > JkLogLevel warn > > > > > > > JkMount /msn/* worker1 > > > > > > > </IfModule> > > > > > > > > The result is that the url: > > >http://localhost/msn/Messenger.htmlworks, > > > > > > > but this html conects to servelet that not work. > > > > > > > The mod_jk runs html in apache that fisically are in tomcat, but > > > cant > > > > > > > run the servlet. > > > > > > > > ¿Is necesary some special configure? > > > > > > > > Thanks! > > > > > > > > On 20 feb, 16:04, Fran <[email protected]> wrote: > > > > > > > > > Ok, thanks. > > > > > > > > > I will test mod_jk. I tested jk but i couldnt to run it in > > > > > > > > tomcat > > > 6. > > > > > > > > Im going to test jk one more time. > > > > > > > > > Thanks a lot! > > > > > > > > > On 20 feb, 03:46, Chris Lercher <[email protected]> wrote: > > > > > > > > > > The timeout is for the max time the app server gets to > > > > > > > > > respond. > > > If it > > > > > > > > > closes the connection earlier (which it should do, once it > > > sends its > > > > > > > > > response), then the delay is shorter. This is what long > > > > > > > > > polling > > > is all > > > > > > > > > about. So if you set the delay to 15 seconds, it doesn't mean > > > you have > > > > > > > > > to wait for 15 seconds every time. That's only, when the > > > > > > > > > server > > > > > > > > > doesn't send the response within 15 seconds. > > > > > > > > > > But as dablack says, probably mod_jk is the better solution > > > anyway. > > > > > > > > > However, like I said earlier, there may be additional proxies > > > between > > > > > > > > > your server and the client. So if it doesn't work correctly > > > with > > > > > > > > > mod_proxy, this could indicate, that there is some problem in > > > the way > > > > > > > > > the app server and the client interact. I have the feeling, > > > that the > > > > > > > > > server maybe doesn't close its connection, so the proxy won't > > > (always) > > > > > > > > > flush its contents. This triggers a timeout on the proxy or on > > > the > > > > > > > > > client (depending on which is shorter). > > > > > > > > > > On Feb 20, 2:08 am, Fran <[email protected]> wrote: > > > > > > > > > > > If I dont put a short timeout, the aplication isnt good. > > > > > > > > > > Do you imagine that the MSN Messenger delay 15 seconds to > > > show you the > > > > > > > > > > contact list? > > > > > > > > > > > I need that the solution works as the aplication in tomcat. > > > If I > > > > > > > > > > execute the aplication on tomcat, it work without timeout. > > > > > > > > > > So > > > I need > > > > > > > > > > when the aplication works in apache, seems that is working > > > > > > > > > > in > > > tomcat. > > > > > > > > > > > Im going to show the url that you tell me. Thanks! > > > > > > > > > > > On 20 feb, 01:57, Chris Lercher <[email protected]> > > > wrote: > > > > > > > > > > > > BTW, here's a link about timeouts + Comet: > > >http://code.google.com/p/google-web-toolkit-incubator/wiki/ServerPushFAQ > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "Google Web Toolkit" group. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > > > [email protected]<google-web-toolkit%[email protected]> > > > . > > > For more options, visit this group at > > >http://groups.google.com/group/google-web-toolkit?hl=en. -- You received this message because you are subscribed to the Google Groups "Google Web Toolkit" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/google-web-toolkit?hl=en.
