Dear all,
I do have a very naive question about the subnets parameter. I read the
various docs [*], but it is not clear to me how do best define it in my
use case. As an example, I have a CL1 storage cluster, and a CL2 client
cluster that remotely mounts CL1 storage, and they are both connected to
a private IB network 192.168.0.0. Where should I define
subnets=192.168.0.0/CL1;CL2 : on CL1, CL2 or both? Some directionality
seems implied in the docs, but it was not totally clear to me...
Thanks a lot!
cheers
leo
[*]
https://www.ibm.com/docs/en/spectrum-scale/5.1.7?topic=system-using-remote-access-multiple-network-definitions
https://www.ibm.com/docs/en/spectrum-scale/5.1.7?topic=communication-using-public-private-ip-addresses-gpfs-nodes
--
Paul Scherrer Institut
Dr. Leonardo Sala
Group Leader Data Analysis and Research Infrastructure
Deputy Department Head a.i Science IT Infrastructure and Services department
Science IT Infrastructure and Services department (AWI)
WHGA/036
Forschungstrasse 111
5232 Villigen PSI
Switzerland
Phone: +41 56 310 3369
[email protected]
www.psi.ch
_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at gpfsug.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss_gpfsug.org
