Ooh, LROC sensors for Zimon… must look into that.

From: [email protected] 
[mailto:[email protected]] On Behalf Of Sven Oehme
Sent: 21 December 2016 09:23
To: gpfsug main discussion list <[email protected]>
Subject: Re: [gpfsug-discuss] LROC

Lroc only needs a StatCache object as it 'compacts' a full open File object 
(maxFilesToCache) to a StatCache Object when it moves the content to the LROC 
device.
therefore the only thing you really need to increase is maxStatCache on the 
LROC node, but you still need maxFiles Objects, so leave that untouched and 
just increas maxStat

Olaf's comment is important you need to make sure your manager nodes have 
enough memory to hold tokens for all the objects you want to cache, but if the 
memory is there and you have enough its well worth spend a lot of memory on it 
and bump maxStatCache to a high number. i have tested maxStatCache up to 16 
million at some point per node, but if nodes with this large amount of inodes 
crash or you try to shut them down you have some delays , therefore i suggest 
you stay within a 1 or 2  million per node and see how well it does and also if 
you get a significant gain.
i did help Bob to setup some monitoring for it so he can actually get 
comparable stats, i suggest you setup Zimon and enable the Lroc sensors to have 
real stats too , so you can see what benefits you get.

Sven
On Tue, Dec 20, 2016 at 8:13 PM Matt Weil 
<[email protected]<mailto:[email protected]>> wrote:

as many as possible and both

have maxFilesToCache 128000

and maxStatCache 40000

do these effect what sits on the LROC as well?  Are those to small? 1million 
seemed excessive.

On 12/20/16 11:03 AM, Sven Oehme wrote:
how much files do you want to cache ?
and do you only want to cache metadata or also data associated to the files ?

sven



On Tue, Dec 20, 2016 at 5:35 PM Matt Weil 
<[email protected]<mailto:[email protected]>> wrote:
https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/General%20Parallel%20File%20System%20(GPFS)/page/Flash%20Storage<https://www.ibm.com/developerworks/community/wikis/home?lang=en#%21/wiki/General%20Parallel%20File%20System%20%28GPFS%29/page/Flash%20Storage>

Hello all,

Are there any tuning recommendations to get these to cache more metadata?

Thanks

Matt

_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org<http://spectrumscale.org>
http://gpfsug.org/mailman/listinfo/gpfsug-discuss


_______________________________________________

gpfsug-discuss mailing list

gpfsug-discuss at spectrumscale.org<http://spectrumscale.org>

http://gpfsug.org/mailman/listinfo/gpfsug-discuss

_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org<http://spectrumscale.org>
http://gpfsug.org/mailman/listinfo/gpfsug-discuss
_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss

Reply via email to