Do you know if there is actually a cable plugged into port 2?
The system will work fine as long as there is network connectivity, but you may have an issue with redundancy or loss of bandwidth if you do not have every port cabled and configured correctly.
Regards
Andrew Beattie
Software Defined Storage - IT Specialist
Phone: 614-2133-7927
E-mail: [email protected]
----- Original message -----
From: "Dorigo Alvise (PSI)" <[email protected]>
Sent by: [email protected]
To: "[email protected]" <[email protected]>
Cc:
Subject: [gpfsug-discuss] How to get rid of very old mmhealth events
Date: Thu, Jun 28, 2018 6:08 PM
Dear experts,I've e GL2 IBM system running SpectrumScale v4.2.3-6 (RHEL 7.3).The system is working properly but I get a DEGRADED status report for the NETWORK running the command mmhealth:[root@sf-gssio1 ~]# mmhealth node show
Node name: sf-gssio1.psi.ch
Node status: DEGRADED
Status Change: 23 min. ago
Component Status Status Change Reasons
-------------------------------------------------------------------------------------------------------------------------------------------
GPFS HEALTHY 22 min. ago -
NETWORK DEGRADED 145 days ago ib_rdma_link_down(mlx5_0/2), ib_rdma_nic_down(mlx5_0/2), ib_rdma_nic_unrecognized(mlx5_0/2)[...]This event is clearly an outlier because the network, verbs and IB are correctly working:[root@sf-gssio1 ~]# mmfsadm test verbs status
VERBS RDMA status: started[root@sf-gssio1 ~]# mmlsconfig verbsPorts|grep gssio1
verbsPorts mlx5_0/1 [sf-ems1,sf-gssio1,sf-gssio2][root@sf-gssio1 ~]# mmdiag --config|grep verbsPorts
! verbsPorts mlx5_0/1[root@sf-gssio1 ~]# ibstat mlx5_0
CA 'mlx5_0'
CA type: MT4113
Number of ports: 2
Firmware version: 10.16.1020
Hardware version: 0
Node GUID: 0xec0d9a03002b5db0
System image GUID: 0xec0d9a03002b5db0
Port 1:
State: Active
Physical state: LinkUp
Rate: 56
Base lid: 42
LMC: 0
SM lid: 1
Capability mask: 0x26516848
Port GUID: 0xec0d9a03002b5db0
Link layer: InfiniBand
Port 2:
State: Down
Physical state: Disabled
Rate: 10
Base lid: 65535
LMC: 0
SM lid: 0
Capability mask: 0x26516848
Port GUID: 0xec0d9a03002b5db8
Link layer: InfiniBandThat event is there since 145 days and I didn't go away after a daemon restart (mmshutdown/mmstartup).My question is: how I can get rid of this event and restore the mmhealth's output to HEALTHY ? This is important because I've nagios sensors that periodically parse the "mmhealth -Y ..." output and at the moment I've to disable their email notification (which is not good if some real bad event happens).Thanks,Alvise_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss
_______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss
