Hello I will try my luck here. Trying to monitor capacity on our gpfs system via observium. For some reason hrStorageTable doesn’t pick up that gpfs mount point though. In diskTable it’s visible but I cannot use diskTable when monitoring via observium, has to be hrStorageTable (I was told by observium dev). Output of a few snmpwalks and more at the bottom.
Are there any obvious reasons for Centos 6.7 to not pick up a gpfs mountpoint in hrStorageTable? I’m not that snmp, nor gpfs, savvy so not sure if it’s even possible to in some way force it to include it in hrStorageTable…? Apologies if this isn’t the list for questions like this. But feels like there has to be one or two peeps here monitoring their systems here. =) All these commands ran on that host: df -h | grep ddnnas0 /dev/ddnnas0 1.7P 913T 739T 56% /ddnnas0 mount | grep ddnnas0 /dev/ddnnas0 on /ddnnas0 type gpfs (rw,relatime,mtime,nfssync,dev=ddnnas0) snmpwalk -v2c -c secret localhost hrStorageDescr HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: Physical memory HOST-RESOURCES-MIB::hrStorageDescr.3 = STRING: Virtual memory HOST-RESOURCES-MIB::hrStorageDescr.6 = STRING: Memory buffers HOST-RESOURCES-MIB::hrStorageDescr.7 = STRING: Cached memory HOST-RESOURCES-MIB::hrStorageDescr.10 = STRING: Swap space HOST-RESOURCES-MIB::hrStorageDescr.31 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.35 = STRING: /dev/shm HOST-RESOURCES-MIB::hrStorageDescr.36 = STRING: /boot HOST-RESOURCES-MIB::hrStorageDescr.37 = STRING: /boot-rcvy HOST-RESOURCES-MIB::hrStorageDescr.38 = STRING: /crash HOST-RESOURCES-MIB::hrStorageDescr.39 = STRING: /rcvy HOST-RESOURCES-MIB::hrStorageDescr.40 = STRING: /var HOST-RESOURCES-MIB::hrStorageDescr.41 = STRING: /var-rcvy snmpwalk -v2c -c secret localhost dskPath UCD-SNMP-MIB::dskPath.1 = STRING: /ddnnas0 UCD-SNMP-MIB::dskPath.2 = STRING: / yum list | grep net-snmp Failed to set locale, defaulting to C net-snmp.x86_64 1:5.5-60.el6 @base net-snmp-libs.x86_64 1:5.5-60.el6 @base net-snmp-perl.x86_64 1:5.5-60.el6 @base net-snmp-utils.x86_64 1:5.5-60.el6 @base net-snmp-devel.i686 1:5.5-60.el6 base net-snmp-devel.x86_64 1:5.5-60.el6 base net-snmp-libs.i686 1:5.5-60.el6 base net-snmp-python.x86_64 1:5.5-60.el6 base Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
_______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss
