On Spectrum Scale 4.2.3.15 or later and 5.0.2.2 or later, you can install gplbin without stopping GPFS by using the following step:
Build gpfs.gplbin using mmbuildgpl --build-packge Set environment variable MM_INSTALL_ONLY to 1 before install gpfs.gplbin package with rpm -i gpfs.gplbin*.rpm Regards, The Spectrum Scale (GPFS) team ------------------------------------------------------------------------------------------------------------------ If you feel that your question can benefit other users of Spectrum Scale (GPFS), then please post it to the public IBM developerWroks Forum at https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000479 . If your query concerns a potential software error in Spectrum Scale (GPFS) and you have an IBM software maintenance contract please contact 1-800-237-5511 in the United States or your local IBM Service Center in other countries. The forum is informally monitored as time permits and should not be used for priority messages to the Spectrum Scale (GPFS) team. gpfsug-discuss-boun...@spectrumscale.org wrote on 01/16/2020 10:32:27 AM: > From: Skylar Thompson <skyl...@uw.edu> > To: gpfsug-discuss@spectrumscale.org > Date: 01/16/2020 10:35 AM > Subject: [EXTERNAL] Re: [gpfsug-discuss] How to install efix with yum ? > Sent by: gpfsug-discuss-boun...@spectrumscale.org > > Another problem we've run into with automating GPFS installs/upgrades is > that the gplbin (kernel module) packages have a post-install script that > will unmount the filesystem *even if the package isn't for the running > kernel*. We needed to write some custom reporting in our configuration > management system to only install gplbin if GPFS was already stopped on the > node. > > On Wed, Jan 15, 2020 at 10:35:23PM +0000, Sanchez, Paul wrote: > > This reminds me that there is one more thing which drives the > convoluted process I described earlier??? > > > > Automation. Deployment solutions which use yum to build new hosts > are often the place where one notices the problem. They would need > to determine that they should install both the base-version and efix > RPMS and in that order. IIRC, there were no RPM dependencies > connecting the efix RPMs to their base-version equivalents, so > there was nothing to signal YUM that installing the efix requires > that the base-version be installed first. > > > > (Our particular case is worse than just this though, since we > prohibit installing two versions/releases for the same (non-kernel) > package name. But that???s not the case for everyone.) > > > > -Paul > > > > From: gpfsug-discuss-boun...@spectrumscale.org <gpfsug-discuss- > boun...@spectrumscale.org> On Behalf Of IBM Spectrum Scale > > Sent: Wednesday, January 15, 2020 16:00 > > To: gpfsug main discussion list <gpfsug-discuss@spectrumscale.org> > > Cc: gpfsug-discuss-boun...@spectrumscale.org > > Subject: Re: [gpfsug-discuss] How to install efix with yum ? > > > > > > This message was sent by an external party. > > > > > > >> I don't see any yum options which match rpm's '--force' option. > > Actually, you do not need to use --force option since efix RPMs > have incremental efix number in rpm name. > > > > Efix package provides update RPMs to be installed on top of > corresponding PTF GA version. When you install 5.0.4.1 efix9, if 5. > 0.4.1 is already installed on your system, "yum update" should work. > > > > Regards, The Spectrum Scale (GPFS) team > > > > > ------------------------------------------------------------------------------------------------------------------ > > If you feel that your question can benefit other users of Spectrum > Scale (GPFS), then please post it to the public IBM developerWroks Forum at > https://www.ibm.com/developerworks/community/forums/html/forum? > id=11111111-0000-0000-0000-000000000479. > > > > If your query concerns a potential software error in Spectrum > Scale (GPFS) and you have an IBM software maintenance contract > please contact 1-800-237-5511 in the United States or your local IBM > Service Center in other countries. > > > > The forum is informally monitored as time permits and should not > be used for priority messages to the Spectrum Scale (GPFS) team. > > > > [Inactive hide details for Jonathan Buzzard ---01/15/2020 02:09:33 > PM---On 15/01/2020 18:30, Sanchez, Paul wrote: > Yum > generall]Jonathan Buzzard ---01/15/2020 02:09:33 PM---On 15/01/2020 > 18:30, Sanchez, Paul wrote: > Yum generally only wants there to be > single version of a > > > > From: Jonathan Buzzard <jonathan.buzz...@strath.ac.uk< > mailto:jonathan.buzz...@strath.ac.uk>> > > To: "gpfsug-discuss@spectrumscale.org<mailto:gpfsug- > disc...@spectrumscale.org>" <gpfsug-discuss@spectrumscale.org< > mailto:gpfsug-discuss@spectrumscale.org>> > > Date: 01/15/2020 02:09 PM > > Subject: [EXTERNAL] Re: [gpfsug-discuss] How to install efix with yum ? > > Sent by: gpfsug-discuss-boun...@spectrumscale.org<mailto:gpfsug- > discuss-boun...@spectrumscale.org> > > > > ________________________________ > > > > > > > > On 15/01/2020 18:30, Sanchez, Paul wrote: > > > Yum generally only wants there to be single version of any package (it > > > is trying to eliminate conflicting provides/depends so that all of the > > > packaging requirements are satisfied). So this alien packaging practice > > > of installing an efix version of a package over the top of the base > > > version is not compatible with yum. > > > > I would at this juncture note that IBM should be appending the efix > > number to the RPM so that for example > > > > gpfs.base-5.0.4-1 becomes gpfs.base-5.0.4-1efix9 > > > > which would firstly make the problem go away, and second would allow one > > to know which version of GPFS you happen to have installed on a node > > without doing some sort of voodoo. > > > > > > > > The real issue for draconian sysadmins like us (whose systems must use > > > and obey yum) is that there are files (*liblum.so) which are provided by > > > the non-efix RPMS, but are not owned by the packages according to the > > > RPM database since they???re purposefully installed outside of RPM???s > > > tracking mechanism. > > > > > > > It worse than that because if you install the RPM directly yum/dnf then > > start bitching about the RPM database being modified outside of > > themselves and all sorts of useful information gets lost when you purge > > the package installation history to make the error go away. > > > > > We work around this by repackaging the three affected RPMS to include > > > the orphaned files from the original RPMs (and eliminating the related > > > but problematic checks from the RPMs??? scripts) so that our efix RPMs > > > have been ???un-efix-ified??? and will install as expected when > using ???yum > > > upgrade???. To my knowledge no one???s published a way to do this, so we > > > all just have to figure this out and run rpmrebuild for ourselves. > > > > > > > IBM should be hanging their heads in shame if the replacement RPM is > > missing files. > > > > JAB. > > > > -- > > Jonathan A. Buzzard Tel: +44141-5483420 > > HPC System Administrator, ARCHIE-WeSt. > > University of Strathclyde, John Anderson Building, Glasgow. G4 0NG > > _______________________________________________ > > gpfsug-discuss mailing list > > gpfsug-discuss at spectrumscale.org > > https://urldefense.proofpoint.com/v2/url? > u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss&d=DwICAg&c=jf_iaSHvJObTbx- > siA1ZOg&r=IbxtjdkPAM2Sbon4Lbbi4w&m=JuqnpjbB7dT517f- > YI9EzaM_C0i4QvKJIJn_Vsre80k&s=T9L8T-cXzxzJGTWfpHOTFoExTltGDVXmHFuv9_Jeyjo&e= > > > > > > > > > > > _______________________________________________ > > gpfsug-discuss mailing list > > gpfsug-discuss at spectrumscale.org > > https://urldefense.proofpoint.com/v2/url? > u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss&d=DwICAg&c=jf_iaSHvJObTbx- > siA1ZOg&r=IbxtjdkPAM2Sbon4Lbbi4w&m=JuqnpjbB7dT517f- > YI9EzaM_C0i4QvKJIJn_Vsre80k&s=T9L8T-cXzxzJGTWfpHOTFoExTltGDVXmHFuv9_Jeyjo&e= > > > -- > -- Skylar Thompson (skyl...@u.washington.edu) > -- Genome Sciences Department, System Administrator > -- Foege Building S046, (206)-685-7354 > -- University of Washington School of Medicine > _______________________________________________ > gpfsug-discuss mailing list > gpfsug-discuss at spectrumscale.org > https://urldefense.proofpoint.com/v2/url? > u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss&d=DwICAg&c=jf_iaSHvJObTbx- > siA1ZOg&r=IbxtjdkPAM2Sbon4Lbbi4w&m=JuqnpjbB7dT517f- > YI9EzaM_C0i4QvKJIJn_Vsre80k&s=T9L8T-cXzxzJGTWfpHOTFoExTltGDVXmHFuv9_Jeyjo&e= >
_______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss