lsusb:
======== OUTPUT==========Bus 001 Device 004: ID 04da:2372 Panasonic
(Matsushita) Lumix Camera (Storage mode)
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast
Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root
hub==========================
gphoto2 --auto-detect
======== OUTPUT==========Model Port
----------------------------------------------------------
Mass Storage Camera disk:/media/pi/687F-699C
==========================
LANG=C gphoto2 --summary >summary.txt
======== OUTPUT==========*** Error ***
This camera does not provide any configuration options.
*** Error (-6: 'Unsupported operation') ***==========================
LANG=C gphoto2 --list-all-config >config.txt
======== OUTPUT==========*** Error ***
This camera does not provide any configuration options.
*** Error (-6: 'Unsupported operation') ***==========================
gphoto2 --capture-image
======== OUTPUT==========*** Error ***
This camera can not capture.
ERROR: Could not capture image.
ERROR: Could not capture.
*** Error (-6: 'Unsupported operation') ***
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
Please make sure there is sufficient quoting around the arguments.
==========================
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-all-config
Please make sure there is sufficient quoting around the arguments.
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --summary
Please make sure there is sufficient quoting around the arguments.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
