Hi, Is there software that remote controls the device on Windows?
Can you post "lsusb" output in the capture mode (when it switches out of USB Mass Storage mode)? Basically the protocol would need to be implemented if the device supports it. Ciao, Marcus On Fri, Mar 31, 2017 at 03:20:30PM +0100, Maria João Sousa wrote: > Hi, > > I have a FLIR Vue Pro 336 and I am working on developing a real-time > application that uses thermal images. However, the camera does can not > transmit files in real-time, since it stops being recognized by the PC as a > Mass Storage as soon as I put it in capture mode. > > After reading the gPhoto2 Reference, it seems the features your library > supports would be ideal for the purpose I have in mind, particularly > regarding tethered shooting and the ability to get the raw data and metadata > from the images. > > I read the instructions on the website, and the camera is identified as a > Mass Storage Device by the system, but let me know if I need to provide you > with anything else. > > Thank you in advance for your help! > Best regards, > Maria Sousa > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Gphoto-devel mailing list > Gphoto-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gphoto-devel -- Marcus Meissner,SUSE LINUX GmbH; Maxfeldstrasse 5; D-90409 Nuernberg; Zi. 3.1-33,+49-911-740 53-432,,serv=loki,mail=wotan,type=real <meiss...@suse.de> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
