Good day, I bought a camera - Canon Powershot G3 X recently to build a project using gphoto2. However, I have realised that it is not supported even though it was included in your gphoto2 list of supported camera (http://gphoto.org/proj/libgphoto2/support.php). I have attached the output of some gphoto2 commands. Is there something that I’m doing wrong? Please advise. I would really appreciate your help. Thank you! Cheers Tiffany |
{\rtf1\ansi\ansicpg1252\cocoartf1561\cocoasubrtf600
{\fonttbl\f0\fnil\fcharset0 Menlo-Bold;\f1\fnil\fcharset0 Menlo-Regular;}
{\colortbl;\red255\green255\blue255;\red47\green180\blue29;\red255\green255\blue255;\red0\green0\blue0;
\red64\green11\blue217;}
{\*\expandedcolortbl;;\cssrgb\c20238\c73898\c14947;\csgray\c100000;\csgray\c0;
\cssrgb\c32308\c18668\c88227;}
\paperw11900\paperh16840\margl1440\margr1440\vieww10800\viewh8400\viewkind0
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardirnatural\partightenfactor0
\f0\b\fs22 \cf2 \cb3 \CocoaLigature0 pi@raspberrypi
\f1\b0 \cf4 :
\f0\b \cf5 ~ $
\f1\b0 \cf4 lsusb\
Bus 001 Device 004: ID 04a9:32a8 Canon, Inc. \
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter\
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub\
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub\
\
\f0\b \cf2 pi@raspberrypi
\f1\b0 \cf4 :
\f0\b \cf5 ~ $
\f1\b0 \cf4 gphoto2 --auto-detect\
Model Port \
----------------------------------------------------------\
USB PTP Class Camera usb:001,004 \
\
\f0\b \cf2 pi@raspberrypi
\f1\b0 \cf4 :
\f0\b \cf5 ~ $
\f1\b0 \cf4 LANG=C gphoto2 --summary >summary.txt\
\f0\b \cf2 pi@raspberrypi
\f1\b0 \cf4 :
\f0\b \cf5 ~ $
\f1\b0 \cf4 LANG=C gphoto2 --list-all-config >config.txt\
\f0\b \cf2 pi@raspberrypi
\f1\b0 \cf4 :
\f0\b \cf5 ~ $
\f1\b0 \cf4 gphoto2 --capture-image\
\
*** Error *** \
Sorry, your camera does not support generic capture\
ERROR: Could not capture image.\
ERROR: Could not capture.\
*** Error (-6: 'Unsupported operation') *** \
\
For debugging messages, please use the --debug option.\
Debugging messages may help finding a solution to your problem.\
If you intend to send any error or debug messages to the gphoto\
developer mailing list <[email protected]>, please run\
gphoto2 as follows:\
\
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image\
\
Please make sure there is sufficient quoting around the arguments. \
\
}_______________________________________________ Gphoto-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gphoto-devel
