Hi Helen,
On Wed, Dec 26, 2018 at 02:57:36PM +0100, helen cheng wrote:
> Hi Marcus,
>
> Here’s the additional info about Sony RX100 M5A issue.
>
> What is happening with the Sony RX100 M5A is that even though gphoto2 is set
> to '—capture-tethered', and can capture many images (50 or more sometimes),
> it always eventually stops and the images get stuck in camera ram. This does
> not happen with the RX100 M5.
>
> The debug file was 800MB so I sent just the tail end of it - assuming that’s
> the most relevant part of it. The debug file is from a M5A that has stopped
> successfully downloading the images.
>
> lsusb contains the USBIDs for both cameras.
>
> I tried using the gphoto2 USBID command to force the M5A to use the M5 usb
> id, but when that setting is set the M5A does not connect at all.
2.5.22 now has the M5A listed too, but I think it might not help to just have
it there.
The logfile you attached seems to report that it has no downloadable images at
the time it was taken:
497.226515 camera_wait_for_event (2): DEBUG== 0xd215 after
capture = 0
So currently I think the camera is getting confused earlier :/
It is hard to say how to workaround or fix this.
Can you capture a full debuglog, perhaps without data to keep it smaller?
gphoto2 --capture-tethered --debug-loglevel=debug --debug
--debug-logfile=tether.log
Ciao, Marcus
_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
