Hi,

Sadly the Panasonic DMC-TZ series does not allow remote control over USB,
this is a camera limitation :/

Ciao, Marcus
On Tue, Dec 17, 2019 at 04:34:27PM +0100, Julian wrote:
> Hi there,
> 
> I found this great project in the internet. Unfortunately my camera
> (Panasonic DMC-TZ71) is not supported. I followed the instructions to
> generate more informations (see attachment).
> 
> This camera uses PictBridge, but the summary-document says "No Image
> Capture".
> 
> I hope you can add support for this device...:)
> 
> Have a nice day!
> 
> Julian Mathes
> 

> /main/actions/opcode
> Label: PTP Opcode
> Readonly: 0
> Type: TEXT
> Current: 0x1001,0xparam1,0xparam2
> END
> /main/status/serialnumber
> Label: Serial Number
> Readonly: 0
> Type: TEXT
> Current: 000000000000000000HX1R07030510
> END
> /main/status/manufacturer
> Label: Camera Manufacturer
> Readonly: 0
> Type: TEXT
> Current: Panasonic
> END
> /main/status/cameramodel
> Label: Camera Model
> Readonly: 0
> Type: TEXT
> Current: DMC-TZ71
> END
> /main/status/deviceversion
> Label: Device Version
> Readonly: 0
> Type: TEXT
> Current: 1.0
> END
> /main/status/vendorextension
> Label: Vendor Extension
> Readonly: 0
> Type: TEXT
> Current: None
> END
> /main/status/batterylevel
> Label: Battery Level
> Readonly: 1
> Type: TEXT
> Current: 100%
> END
> /main/other/d406
> Label: Session Initiator Info
> Readonly: 0
> Type: TEXT
> Current: Windows/6.2.9200 MTPClassDriver/6.2.9200.16384
> END
> /main/other/d407
> Label: Perceived Device Type
> Readonly: 1
> Type: TEXT
> Current: 1
> END
> /main/other/5001
> Label: Battery Level
> Readonly: 1
> Type: RANGE
> Current: 100
> Bottom: 0
> Top: 100
> Step: 10
> END

> 0.000009 main                        (2): ALWAYS INCLUDE THE FOLLOWING LINES 
> WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
> 0.000037 main                        (2): gphoto2 2.5.23
> 0.000043 main                        (2): gphoto2 has been compiled with the 
> following options:
> 0.000048 main                        (2):  + gcc (C compiler used)
> 0.000053 main                        (2):  + popt (mandatory, for handling 
> command-line parameters)
> 0.000056 main                        (2):  + exif (for displaying EXIF 
> information)
> 0.000061 main                        (2):  + no cdk (for accessing 
> configuration options)
> 0.000065 main                        (2):  + no aa (for displaying live 
> previews)
> 0.000070 main                        (2):  + jpeg (for displaying live 
> previews in JPEG format)
> 0.000073 main                        (2):  + no readline (for easy navigation 
> in the shell)
> 0.000077 main                        (2): libgphoto2 2.5.23
> 0.000081 main                        (2): libgphoto2 has been compiled with 
> the following options:
> 0.000085 main                        (2):  + all camlibs
> 0.000088 main                        (2):  + gcc (C compiler used)
> 0.000091 main                        (2):  + ltdl (for portable loading of 
> camlibs)
> 0.000094 main                        (2):  + EXIF (for special handling of 
> EXIF files)
> 0.000098 main                        (2): libgphoto2_port 0.12.0
> 0.000101 main                        (2): libgphoto2_port has been compiled 
> with the following options:
> 0.000105 main                        (2):  + iolibs: disk ptpip serial usb 
> usbdiskdirect usbscsi
> 0.000108 main                        (2):  + gcc (C compiler used)
> 0.000112 main                        (2):  + ltdl (for portable loading of 
> iolibs)
> 0.000115 main                        (2):  + USB (libusb0, for USB cameras)
> 0.000118 main                        (2):  + serial (for serial cameras)
> 0.000122 main                        (2):  + no resmgr (serial port access 
> and locking)
> 0.000125 main                        (2):  + no ttylock (serial port locking)
> 0.000128 main                        (2):  + no lockdev (serial port locking)
> 0.000132 main                        (2): CAMLIBS env var not set, using 
> compile-time default instead
> 0.000135 main                        (2): IOLIBS env var not set, using 
> compile-time default instead
> 0.000139 main                        (2): invoked with following arguments:
> 0.000142 main                        (2):   --debug
> 0.000146 main                        (2):   --debug-logfile=my-logfile.txt
> 0.000149 main                        (2):   --capture-image
> 0.000173 load_settings               (2): Creating gphoto config directory 
> ('/home/julian/.gphoto')
> 0.000209 load_settings               (2): Loading settings from file 
> '/home/julian/.gphoto/settings'.
> 0.000237 main                        (2): The user has not specified both a 
> model and a port. Try to figure them out.
> 0.000246 gp_port_info_list_load      (2): Using ltdl to load io-drivers from 
> '/usr/local/lib/libgphoto2_port/0.12.0'...
> 0.000302 foreach_func                (2): Called for filename 
> '/usr/local/lib/libgphoto2_port/0.12.0/disk'.
> 0.000419 gp_port_library_list        (2): found fstab fsname 
> UUID=c29cb612-8950-466d-9522-12da98b9d7b7
> 0.000433 gp_port_library_list        (2): found fstab fsname UUID=BC20-66F3
> 0.000443 gp_port_library_list        (2): found fstab fsname /swapfile
> 0.000507 gp_port_library_list        (2): found mtab fsname sysfs
> 0.000514 gp_port_library_list        (2): found mtab fsname proc
> 0.000519 gp_port_library_list        (2): found mtab fsname udev
> 0.000529 gp_port_library_list        (2): found mtab fsname devpts
> 0.000534 gp_port_library_list        (2): found mtab fsname tmpfs
> 0.000543 gp_port_library_list        (2): found mtab fsname /dev/nvme0n1p6
> 0.000550 gp_port_library_list        (2): found mtab fsname securityfs
> 0.000555 gp_port_library_list        (2): found mtab fsname tmpfs
> 0.000566 gp_port_library_list        (2): found mtab fsname tmpfs
> 0.000574 gp_port_library_list        (2): found mtab fsname tmpfs
> 0.000583 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000592 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000595 gp_port_library_list        (2): found mtab fsname pstore
> 0.000602 gp_port_library_list        (2): found mtab fsname efivarfs
> 0.000633 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000636 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000639 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000642 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000645 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000648 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000652 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000655 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000658 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000661 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000664 gp_port_library_list        (2): found mtab fsname cgroup
> 0.000667 gp_port_library_list        (2): found mtab fsname systemd-1
> 0.000670 gp_port_library_list        (2): found mtab fsname mqueue
> 0.000691 gp_port_library_list        (2): found mtab fsname debugfs
> 0.000698 gp_port_library_list        (2): found mtab fsname hugetlbfs
> 0.000705 gp_port_library_list        (2): found mtab fsname fusectl
> 0.000709 gp_port_library_list        (2): found mtab fsname configfs
> 0.000717 gp_port_library_list        (2): found mtab fsname /dev/loop2
> 0.000723 gp_port_library_list        (2): found mtab fsname /dev/loop3
> 0.000729 gp_port_library_list        (2): found mtab fsname /dev/loop0
> 0.000735 gp_port_library_list        (2): found mtab fsname /dev/loop4
> 0.000741 gp_port_library_list        (2): found mtab fsname /dev/loop5
> 0.000747 gp_port_library_list        (2): found mtab fsname /dev/loop1
> 0.000752 gp_port_library_list        (2): found mtab fsname /dev/loop6
> 0.000761 gp_port_library_list        (2): found mtab fsname /dev/loop7
> 0.000767 gp_port_library_list        (2): found mtab fsname /dev/loop8
> 0.000772 gp_port_library_list        (2): found mtab fsname /dev/loop10
> 0.000778 gp_port_library_list        (2): found mtab fsname /dev/loop9
> 0.000784 gp_port_library_list        (2): found mtab fsname /dev/loop11
> 0.000815 gp_port_library_list        (2): found mtab fsname /dev/loop13
> 0.000821 gp_port_library_list        (2): found mtab fsname /dev/loop14
> 0.000827 gp_port_library_list        (2): found mtab fsname /dev/loop12
> 0.000832 gp_port_library_list        (2): found mtab fsname /dev/loop16
> 0.000838 gp_port_library_list        (2): found mtab fsname /dev/loop15
> 0.000843 gp_port_library_list        (2): found mtab fsname /dev/loop17
> 0.000848 gp_port_library_list        (2): found mtab fsname /dev/loop18
> 0.000854 gp_port_library_list        (2): found mtab fsname /dev/loop19
> 0.000860 gp_port_library_list        (2): found mtab fsname /dev/nvme0n1p1
> 0.000865 gp_port_library_list        (2): found mtab fsname binfmt_misc
> 0.000876 gp_port_library_list        (2): found mtab fsname tmpfs
> 0.000883 gp_port_library_list        (2): found mtab fsname tmpfs
> 0.000890 gp_port_library_list        (2): found mtab fsname gvfsd-fuse
> 0.000894 gp_port_library_list        (2): found mtab fsname /dev/nvme0n1p3
> 0.001256 foreach_func                (2): Loaded '' ('^disk:') from 
> '/usr/local/lib/libgphoto2_port/0.12.0/disk'.
> 0.001265 foreach_func                (2): Called for filename 
> '/usr/local/lib/libgphoto2_port/0.12.0/ptpip'.
> 0.001345 foreach_func                (2): Loaded 'PTP/IP Connection' 
> ('ptpip:') from '/usr/local/lib/libgphoto2_port/0.12.0/ptpip'.
> 0.001351 foreach_func                (2): Loaded '' ('^ptpip:') from 
> '/usr/local/lib/libgphoto2_port/0.12.0/ptpip'.
> 0.001354 foreach_func                (2): Called for filename 
> '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001477 foreach_func                (2): Loaded 'Serial Port 0' 
> ('serial:/dev/ttyS0') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001482 foreach_func                (2): Loaded 'Serial Port 1' 
> ('serial:/dev/ttyS1') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001489 foreach_func                (2): Loaded 'Serial Port 2' 
> ('serial:/dev/ttyS2') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001492 foreach_func                (2): Loaded 'Serial Port 3' 
> ('serial:/dev/ttyS3') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001494 foreach_func                (2): Loaded 'Serial Port 4' 
> ('serial:/dev/ttyS4') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001497 foreach_func                (2): Loaded 'Serial Port 5' 
> ('serial:/dev/ttyS5') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001500 foreach_func                (2): Loaded 'Serial Port 6' 
> ('serial:/dev/ttyS6') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001503 foreach_func                (2): Loaded 'Serial Port 7' 
> ('serial:/dev/ttyS7') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001506 foreach_func                (2): Loaded 'Serial Port 8' 
> ('serial:/dev/ttyS8') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001509 foreach_func                (2): Loaded 'Serial Port 9' 
> ('serial:/dev/ttyS9') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001511 foreach_func                (2): Loaded 'Serial Port 10' 
> ('serial:/dev/ttyS10') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001514 foreach_func                (2): Loaded 'Serial Port 11' 
> ('serial:/dev/ttyS11') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001517 foreach_func                (2): Loaded 'Serial Port 12' 
> ('serial:/dev/ttyS12') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001520 foreach_func                (2): Loaded 'Serial Port 13' 
> ('serial:/dev/ttyS13') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001523 foreach_func                (2): Loaded 'Serial Port 14' 
> ('serial:/dev/ttyS14') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001525 foreach_func                (2): Loaded 'Serial Port 15' 
> ('serial:/dev/ttyS15') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001528 foreach_func                (2): Loaded 'Serial Port 16' 
> ('serial:/dev/ttyS16') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001531 foreach_func                (2): Loaded 'Serial Port 17' 
> ('serial:/dev/ttyS17') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001534 foreach_func                (2): Loaded 'Serial Port 18' 
> ('serial:/dev/ttyS18') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001536 foreach_func                (2): Loaded 'Serial Port 19' 
> ('serial:/dev/ttyS19') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001539 foreach_func                (2): Loaded 'Serial Port 20' 
> ('serial:/dev/ttyS20') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001542 foreach_func                (2): Loaded 'Serial Port 21' 
> ('serial:/dev/ttyS21') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001545 foreach_func                (2): Loaded 'Serial Port 22' 
> ('serial:/dev/ttyS22') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001548 foreach_func                (2): Loaded 'Serial Port 23' 
> ('serial:/dev/ttyS23') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001550 foreach_func                (2): Loaded 'Serial Port 24' 
> ('serial:/dev/ttyS24') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001553 foreach_func                (2): Loaded 'Serial Port 25' 
> ('serial:/dev/ttyS25') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001556 foreach_func                (2): Loaded 'Serial Port 26' 
> ('serial:/dev/ttyS26') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001559 foreach_func                (2): Loaded 'Serial Port 27' 
> ('serial:/dev/ttyS27') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001562 foreach_func                (2): Loaded 'Serial Port 28' 
> ('serial:/dev/ttyS28') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001565 foreach_func                (2): Loaded 'Serial Port 29' 
> ('serial:/dev/ttyS29') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001567 foreach_func                (2): Loaded 'Serial Port 30' 
> ('serial:/dev/ttyS30') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001572 foreach_func                (2): Loaded 'Serial Port 31' 
> ('serial:/dev/ttyS31') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001575 foreach_func                (2): Loaded 'Serial Port Device' 
> ('serial:') from '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001578 foreach_func                (2): Loaded '' ('^serial:') from 
> '/usr/local/lib/libgphoto2_port/0.12.0/serial'.
> 0.001580 foreach_func                (2): Called for filename 
> '/usr/local/lib/libgphoto2_port/0.12.0/usb'.
> 0.155763 foreach_func                (2): Loaded '' ('^usb:') from 
> '/usr/local/lib/libgphoto2_port/0.12.0/usb'.
> 0.155804 foreach_func                (2): Loaded 'Universal Serial Bus' 
> ('usb:001,012') from '/usr/local/lib/libgphoto2_port/0.12.0/usb'.
> 0.155812 foreach_func                (2): Loaded 'Universal Serial Bus' 
> ('usb:001,007') from '/usr/local/lib/libgphoto2_port/0.12.0/usb'.
> 0.155816 foreach_func                (2): Loaded 'Universal Serial Bus' 
> ('usb:001,005') from '/usr/local/lib/libgphoto2_port/0.12.0/usb'.
> 0.155821 foreach_func                (2): Loaded 'Universal Serial Bus' 
> ('usb:001,003') from '/usr/local/lib/libgphoto2_port/0.12.0/usb'.
> 0.155826 foreach_func                (2): Called for filename 
> '/usr/local/lib/libgphoto2_port/0.12.0/usbdiskdirect'.
> 0.156009 foreach_func                (2): Called for filename 
> '/usr/local/lib/libgphoto2_port/0.12.0/usbscsi'.
> 0.156208 gp_port_info_list_count     (2): Counting entries (42 available)...
> 0.156220 gp_port_info_list_count     (2): 38 regular entries available.
> 0.156236 gp_abilities_list_load_dir  (2): Using ltdl to load camera libraries 
> from '/usr/local/lib/libgphoto2/2.5.23'...
> 0.156310 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/ax203'.
> 0.156320 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/canon'.
> 0.156325 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/digigr8'.
> 0.156329 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/dimagev'.
> 0.156333 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/directory'.
> 0.156337 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/jl2005a'.
> 0.156341 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/jl2005c'.
> 0.156345 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/kodak_dc240'.
> 0.156349 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/mars'.
> 0.156353 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/pentax'.
> 0.156357 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/ptp2'.
> 0.156364 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/sierra'.
> 0.156369 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/sonix'.
> 0.156373 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/sq905'.
> 0.156377 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/st2205'.
> 0.156381 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/topfield'.
> 0.156386 foreach_func                (2): Found 
> '/usr/local/lib/libgphoto2/2.5.23/tp6801'.
> 0.156396 gp_abilities_list_load_dir  (2): Found 17 camera drivers.
> 0.165370 gp_port_info_list_count     (2): Counting entries (42 available)...
> 0.165392 gp_port_info_list_count     (2): 38 regular entries available.
> 0.165396 gp_port_new                 (2): Creating new device...
> 0.165408 gp_port_info_list_get_info  (2): Getting info of entry 0 (42 
> available)...
> 0.165512 gp_port_set_settings        (2): Setting settings...
> 0.165520 gp_port_info_list_get_info  (2): Getting info of entry 1 (42 
> available)...
> 0.165586 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.165591 gp_port_set_settings        (2): Setting settings...
> 0.165595 gp_port_info_list_get_info  (2): Getting info of entry 2 (42 
> available)...
> 0.165652 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.165657 gp_port_set_settings        (2): Setting settings...
> 0.165667 gp_port_info_list_get_info  (2): Getting info of entry 3 (42 
> available)...
> 0.165722 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.165727 gp_port_set_settings        (2): Setting settings...
> 0.165730 gp_port_info_list_get_info  (2): Getting info of entry 4 (42 
> available)...
> 0.165780 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.165785 gp_port_set_settings        (2): Setting settings...
> 0.165788 gp_port_info_list_get_info  (2): Getting info of entry 5 (42 
> available)...
> 0.165876 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.165882 gp_port_set_settings        (2): Setting settings...
> 0.165885 gp_port_info_list_get_info  (2): Getting info of entry 6 (42 
> available)...
> 0.165939 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.165943 gp_port_set_settings        (2): Setting settings...
> 0.165947 gp_port_info_list_get_info  (2): Getting info of entry 7 (42 
> available)...
> 0.165997 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166001 gp_port_set_settings        (2): Setting settings...
> 0.166005 gp_port_info_list_get_info  (2): Getting info of entry 8 (42 
> available)...
> 0.166054 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166059 gp_port_set_settings        (2): Setting settings...
> 0.166062 gp_port_info_list_get_info  (2): Getting info of entry 9 (42 
> available)...
> 0.166120 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166125 gp_port_set_settings        (2): Setting settings...
> 0.166128 gp_port_info_list_get_info  (2): Getting info of entry 10 (42 
> available)...
> 0.166177 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166182 gp_port_set_settings        (2): Setting settings...
> 0.166185 gp_port_info_list_get_info  (2): Getting info of entry 11 (42 
> available)...
> 0.166234 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166238 gp_port_set_settings        (2): Setting settings...
> 0.166241 gp_port_info_list_get_info  (2): Getting info of entry 12 (42 
> available)...
> 0.166296 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166301 gp_port_set_settings        (2): Setting settings...
> 0.166304 gp_port_info_list_get_info  (2): Getting info of entry 13 (42 
> available)...
> 0.166355 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166360 gp_port_set_settings        (2): Setting settings...
> 0.166363 gp_port_info_list_get_info  (2): Getting info of entry 14 (42 
> available)...
> 0.166412 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166417 gp_port_set_settings        (2): Setting settings...
> 0.166436 gp_port_info_list_get_info  (2): Getting info of entry 15 (42 
> available)...
> 0.166482 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166486 gp_port_set_settings        (2): Setting settings...
> 0.166489 gp_port_info_list_get_info  (2): Getting info of entry 16 (42 
> available)...
> 0.166542 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166546 gp_port_set_settings        (2): Setting settings...
> 0.166549 gp_port_info_list_get_info  (2): Getting info of entry 17 (42 
> available)...
> 0.166595 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166599 gp_port_set_settings        (2): Setting settings...
> 0.166602 gp_port_info_list_get_info  (2): Getting info of entry 18 (42 
> available)...
> 0.166647 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166652 gp_port_set_settings        (2): Setting settings...
> 0.166655 gp_port_info_list_get_info  (2): Getting info of entry 19 (42 
> available)...
> 0.166700 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166705 gp_port_set_settings        (2): Setting settings...
> 0.166707 gp_port_info_list_get_info  (2): Getting info of entry 20 (42 
> available)...
> 0.166769 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166778 gp_port_set_settings        (2): Setting settings...
> 0.166781 gp_port_info_list_get_info  (2): Getting info of entry 21 (42 
> available)...
> 0.166828 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166833 gp_port_set_settings        (2): Setting settings...
> 0.166836 gp_port_info_list_get_info  (2): Getting info of entry 22 (42 
> available)...
> 0.166882 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166886 gp_port_set_settings        (2): Setting settings...
> 0.166889 gp_port_info_list_get_info  (2): Getting info of entry 23 (42 
> available)...
> 0.166934 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.166939 gp_port_set_settings        (2): Setting settings...
> 0.166952 gp_port_info_list_get_info  (2): Getting info of entry 24 (42 
> available)...
> 0.166999 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167004 gp_port_set_settings        (2): Setting settings...
> 0.167007 gp_port_info_list_get_info  (2): Getting info of entry 25 (42 
> available)...
> 0.167061 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167065 gp_port_set_settings        (2): Setting settings...
> 0.167068 gp_port_info_list_get_info  (2): Getting info of entry 26 (42 
> available)...
> 0.167114 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167118 gp_port_set_settings        (2): Setting settings...
> 0.167121 gp_port_info_list_get_info  (2): Getting info of entry 27 (42 
> available)...
> 0.167166 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167170 gp_port_set_settings        (2): Setting settings...
> 0.167173 gp_port_info_list_get_info  (2): Getting info of entry 28 (42 
> available)...
> 0.167219 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167223 gp_port_set_settings        (2): Setting settings...
> 0.167226 gp_port_info_list_get_info  (2): Getting info of entry 29 (42 
> available)...
> 0.167271 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167276 gp_port_set_settings        (2): Setting settings...
> 0.167279 gp_port_info_list_get_info  (2): Getting info of entry 30 (42 
> available)...
> 0.167324 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167328 gp_port_set_settings        (2): Setting settings...
> 0.167331 gp_port_info_list_get_info  (2): Getting info of entry 31 (42 
> available)...
> 0.167377 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167382 gp_port_set_settings        (2): Setting settings...
> 0.167384 gp_port_info_list_get_info  (2): Getting info of entry 32 (42 
> available)...
> 0.167430 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167435 gp_port_set_settings        (2): Setting settings...
> 0.167438 gp_port_info_list_get_info  (2): Getting info of entry 33 (42 
> available)...
> 0.167483 gp_port_set_timeout         (2): Setting port timeout to 500 
> milliseconds.
> 0.167488 gp_port_set_settings        (2): Setting settings...
> 0.167491 gp_port_info_list_get_info  (2): Getting info of entry 34 (42 
> available)...
> 0.493933 gp_port_set_timeout         (2): Setting port timeout to 5000 
> milliseconds.
> 0.494078 gp_port_set_settings        (2): Setting settings...
> 0.494140 gp_port_usb_update          (2): gp_port_usb_update(old int=0, 
> conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1), port 
> usb:001,012
> 0.494174 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.495969 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.496467 gp_port_usb_find_device_lib (2): Looking for USB device (vendor 
> 0x4da, product 0x2374)... found.
> 0.496514 gp_port_usb_find_device_lib (2): inep to look for is 82
> 0.496555 gp_port_usb_find_device_lib (2): Detected defaults: config 1, 
> interface 0, altsetting 0, inep 82, outep 01, intep 83, class 06, subclass 01
> 0.496584 gp_abilities_list_detect_usb(2): Found 'Panasonic DMC-FS62' 
> (0x4da,0x2374)
> 0.496656 gp_port_info_list_get_info  (2): Getting info of entry 35 (42 
> available)...
> 0.499106 gp_port_set_timeout         (2): Setting port timeout to 5000 
> milliseconds.
> 0.499154 gp_port_set_settings        (2): Setting settings...
> 0.499185 gp_port_usb_update          (2): gp_port_usb_update(old int=0, 
> conf=-1, alt=-1) port usb:001,007, (new int=0, conf=-1, alt=-1), port 
> usb:001,007
> 0.499205 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.500297 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.501164 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.501245 gp_port_info_list_get_info  (2): Getting info of entry 36 (42 
> available)...
> 0.669317 gp_port_set_timeout         (2): Setting port timeout to 5000 
> milliseconds.
> 0.669424 gp_port_set_settings        (2): Setting settings...
> 0.669478 gp_port_usb_update          (2): gp_port_usb_update(old int=0, 
> conf=-1, alt=-1) port usb:001,005, (new int=0, conf=-1, alt=-1), port 
> usb:001,005
> 0.669509 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.670625 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.671431 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.671505 gp_port_info_list_get_info  (2): Getting info of entry 37 (42 
> available)...
> 0.673749 gp_port_set_timeout         (2): Setting port timeout to 5000 
> milliseconds.
> 0.673787 gp_port_set_settings        (2): Setting settings...
> 0.673817 gp_port_usb_update          (2): gp_port_usb_update(old int=0, 
> conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1), port 
> usb:001,003
> 0.673926 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.675019 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.675819 gp_port_usb_find_device_by_class_lib(2): Looking for USB device 
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.675891 gp_port_free                (2): Freeing port...
> 0.675911 gp_port_close               (2): Closing port...
> 0.675944 gp_port_usb_close [libusb.c:325](0): Invalid parameters: 'port && 
> port->pl->dh' is NULL/FALSE.
> 0.676195 gp_camera_set_abilities     (2): Setting abilities ('Panasonic 
> DMC-FS62')...
> 0.676228 gp_setting_set              (2): Setting key 'model' to value 
> 'Panasonic DMC-FS62' (gphoto2)
> 0.676251 save_settings               (2): Saving 2 setting(s) to file 
> "/home/julian/.gphoto/settings"
> 0.676579 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,012' (42 
> entries available)...
> 0.676611 gp_port_info_list_get_info  (2): Getting info of entry 34 (42 
> available)...
> 0.676640 gp_camera_set_port_info     (2): Setting port info for port 
> 'Universal Serial Bus' at 'usb:001,012'...
> 0.857195 gp_port_set_timeout         (2): Setting port timeout to 5000 
> milliseconds.
> 0.857300 gp_port_set_settings        (2): Setting settings...
> 0.857353 gp_port_usb_update          (2): gp_port_usb_update(old int=0, 
> conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1), port 
> usb:001,012
> 0.857388 gp_setting_set              (2): Setting key 'port' to value 
> 'usb:001,012' (gphoto2)
> 0.857429 save_settings               (2): Saving 2 setting(s) to file 
> "/home/julian/.gphoto/settings"
> 0.858030 gp_camera_init              (2): Initializing camera...
> 0.858099 gp_port_usb_find_device_lib (2): Looking for USB device (vendor 
> 0x4da, product 0x2374)... found.
> 0.858127 gp_port_usb_find_device_lib (2): inep to look for is 82
> 0.858159 gp_port_usb_find_device_lib (2): Detected defaults: config 1, 
> interface 0, altsetting 0, inep 82, outep 01, intep 83, class 06, subclass 01
> 0.858186 gp_camera_init              (2): Loading 
> '/usr/local/lib/libgphoto2/2.5.23/ptp2'...
> 0.861744 gp_port_open                (2): Opening USB port...
> 0.861798 gp_port_usb_open            (2): gp_port_usb_open(0x560d937816e0)
> 0.861969 gp_port_usb_open            (2): claiming interface 0
> 0.862458 camera_init                 (2): maxpacketsize 512
> 0.862544 gp_port_set_timeout         (2): Setting port timeout to 8000 
> milliseconds.
> 0.862620 ptp                         (2): PTP: Opening session
> 0.862666 ptp_usb_sendreq             (2): Sending PTP_OC 0x1002 (Open 
> session) (0x1) request...
> 0.862708 gp_port_write               (3): Writing 16 = 0x10 bytes to port...
> 0.862826 gp_port_write               (3): Wrote   16 = 0x10 bytes to port: 
> (hexdump of 16 bytes)
> 0000  10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00  ................
> 
> 0.862867 ptp_usb_getresp             (2): Reading PTP_OC 0x1002 (Open 
> session) response...
> 0.862901 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.863183 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-00 00 00 00              ....... ....    
> 
> 0.863280 gp_port_set_timeout         (2): Setting port timeout to 20000 
> milliseconds.
> 0.863328 ptp_usb_sendreq             (2): Sending PTP_OC 0x1001 (Get device 
> info) request...
> 0.863360 gp_port_write               (3): Writing 12 = 0xc bytes to port...
> 0.863464 gp_port_write               (3): Wrote   12 = 0xc bytes to port: 
> (hexdump of 12 bytes)
> 0000  0c 00 00 00 01 00 01 10-01 00 00 00              ............    
> 
> 0.863502 ptp_usb_getdata             (2): Reading PTP_OC 0x1001 (Get device 
> info) data...
> 0.863530 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.863969 gp_port_read                (3): Read    227 = 0xe3 out of 1024 
> bytes from port: (hexdump of 227 bytes)
> 0000  e3 00 00 00 02 00 01 10-01 00 00 00 64 00 06 00  ............d...
> 0010  00 00 64 00 00 00 00 15-00 00 00 01 10 02 10 03  ..d.............
> 0020  10 04 10 05 10 06 10 07-10 08 10 09 10 0a 10 0b  ................
> 0030  10 0f 10 10 10 14 10 15-10 16 10 1b 10 01 98 02  ................
> 0040  98 03 98 05 98 06 00 00-00 04 40 05 40 06 40 08  ..........@.@.@.
> 0050  40 09 40 0c 40 03 00 00-00 06 d4 07 d4 01 50 00  @.@.@.........P.
> 0060  00 00 00 05 00 00 00 01-30 06 30 0d 30 00 38 01  ........0.0.0.8.
> 0070  38 0a 50 00 61 00 6e 00-61 00 73 00 6f 00 6e 00  8.P.a.n.a.s.o.n.
> 0080  69 00 63 00 00 00 09 44-00 4d 00 43 00 2d 00 54  i.c....D.M.C.-.T
> 0090  00 5a 00 37 00 31 00 00-00 04 31 00 2e 00 30 00  .Z.7.1....1...0.
> 00a0  00 00 20 30 00 30 00 30-00 30 00 30 00 30 00 30  .. 0.0.0.0.0.0.0
> 00b0  00 30 00 30 00 30 00 30-00 30 00 30 00 30 00 30  .0.0.0.0.0.0.0.0
> 00c0  00 30 00 30 00 30 00 48-00 58 00 31 00 52 00 30  .0.0.0.H.X.1.R.0
> 00d0  00 37 00 30 00 33 00 30-00 35 00 31 00 30 00 00  .7.0.3.0.5.1.0..
> 00e0  00 00 00               -                         ...             
> 
> 0.864078 ptp_usb_getresp             (2): Reading PTP_OC 0x1001 (Get device 
> info) response...
> 0.864113 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.864368 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-01 00 00 00              ....... ....    
> 
> 0.864461 ptp_usb_sendreq             (2): Sending PTP_OC 0x1016 (Set device 
> property value) (0xd406) request...
> 0.864483 gp_port_write               (3): Writing 16 = 0x10 bytes to port...
> 0.864556 gp_port_write               (3): Wrote   16 = 0x10 bytes to port: 
> (hexdump of 16 bytes)
> 0000  10 00 00 00 01 00 16 10-02 00 00 00 06 d4 00 00  ................
> 
> 0.864585 ptp_usb_senddata            (2): Sending PTP_OC 0x1016 (Set device 
> property value) data...
> 0.864611 gp_port_write               (3): Writing 107 = 0x6b bytes to port...
> 0.864754 gp_port_write               (3): Wrote   107 = 0x6b bytes to port: 
> (hexdump of 107 bytes)
> 0000  6b 00 00 00 02 00 16 10-02 00 00 00 2f 57 00 69  k.........../W.i
> 0010  00 6e 00 64 00 6f 00 77-00 73 00 2f 00 36 00 2e  .n.d.o.w.s./.6..
> 0020  00 32 00 2e 00 39 00 32-00 30 00 30 00 20 00 4d  .2...9.2.0.0. .M
> 0030  00 54 00 50 00 43 00 6c-00 61 00 73 00 73 00 44  .T.P.C.l.a.s.s.D
> 0040  00 72 00 69 00 76 00 65-00 72 00 2f 00 36 00 2e  .r.i.v.e.r./.6..
> 0050  00 32 00 2e 00 39 00 32-00 30 00 30 00 2e 00 31  .2...9.2.0.0...1
> 0060  00 36 00 33 00 38 00 34-00 00 00                 .6.3.8.4...     
> 
> 0.864828 ptp_usb_getresp             (2): Reading PTP_OC 0x1016 (Set device 
> property value) response...
> 0.864855 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.865092 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-02 00 00 00              ....... ....    
> 
> 0.865154 ptp_usb_sendreq             (2): Sending PTP_OC 0x1001 (Get device 
> info) request...
> 0.865179 gp_port_write               (3): Writing 12 = 0xc bytes to port...
> 0.865246 gp_port_write               (3): Wrote   12 = 0xc bytes to port: 
> (hexdump of 12 bytes)
> 0000  0c 00 00 00 01 00 01 10-03 00 00 00              ............    
> 
> 0.865269 ptp_usb_getdata             (2): Reading PTP_OC 0x1001 (Get device 
> info) data...
> 0.865286 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.865983 gp_port_read                (3): Read    227 = 0xe3 out of 1024 
> bytes from port: (hexdump of 227 bytes)
> 0000  e3 00 00 00 02 00 01 10-03 00 00 00 64 00 06 00  ............d...
> 0010  00 00 64 00 00 00 00 15-00 00 00 01 10 02 10 03  ..d.............
> 0020  10 04 10 05 10 06 10 07-10 08 10 09 10 0a 10 0b  ................
> 0030  10 0f 10 10 10 14 10 15-10 16 10 1b 10 01 98 02  ................
> 0040  98 03 98 05 98 06 00 00-00 04 40 05 40 06 40 08  ..........@.@.@.
> 0050  40 09 40 0c 40 03 00 00-00 06 d4 07 d4 01 50 00  @.@.@.........P.
> 0060  00 00 00 05 00 00 00 01-30 06 30 0d 30 00 38 01  ........0.0.0.8.
> 0070  38 0a 50 00 61 00 6e 00-61 00 73 00 6f 00 6e 00  8.P.a.n.a.s.o.n.
> 0080  69 00 63 00 00 00 09 44-00 4d 00 43 00 2d 00 54  i.c....D.M.C.-.T
> 0090  00 5a 00 37 00 31 00 00-00 04 31 00 2e 00 30 00  .Z.7.1....1...0.
> 00a0  00 00 20 30 00 30 00 30-00 30 00 30 00 30 00 30  .. 0.0.0.0.0.0.0
> 00b0  00 30 00 30 00 30 00 30-00 30 00 30 00 30 00 30  .0.0.0.0.0.0.0.0
> 00c0  00 30 00 30 00 30 00 48-00 58 00 31 00 52 00 30  .0.0.0.H.X.1.R.0
> 00d0  00 37 00 30 00 33 00 30-00 35 00 31 00 30 00 00  .7.0.3.0.5.1.0..
> 00e0  00 00 00               -                         ...             
> 
> 0.866025 ptp_usb_getresp             (2): Reading PTP_OC 0x1001 (Get device 
> info) response...
> 0.866044 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.866105 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-03 00 00 00              ....... ....    
> 
> 0.866138 print_debug_deviceinfo      (2): Device info:
> 0.866156 print_debug_deviceinfo      (2): Manufacturer: Panasonic
> 0.866172 print_debug_deviceinfo      (2):   Model: DMC-TZ71
> 0.866188 print_debug_deviceinfo      (2):   device version: 1.0
> 0.866204 print_debug_deviceinfo      (2):   serial number: 
> '000000000000000000HX1R07030510'
> 0.866222 print_debug_deviceinfo      (2): Vendor extension ID: 0x00000006
> 0.866238 print_debug_deviceinfo      (2): Vendor extension version: 100
> 0.866254 print_debug_deviceinfo      (2): Vendor extension description: (null)
> 0.866270 print_debug_deviceinfo      (2): Functional Mode: 0x0000
> 0.866286 print_debug_deviceinfo      (2): PTP Standard Version: 100
> 0.866301 print_debug_deviceinfo      (2): Supported operations:
> 0.866320 print_debug_deviceinfo      (2):   0x1001 (Get device info)
> 0.866337 print_debug_deviceinfo      (2):   0x1002 (Open session)
> 0.866354 print_debug_deviceinfo      (2):   0x1003 (Close session)
> 0.866371 print_debug_deviceinfo      (2):   0x1004 (Get storage IDs)
> 0.866388 print_debug_deviceinfo      (2):   0x1005 (Get storage info)
> 0.866405 print_debug_deviceinfo      (2):   0x1006 (Get number of objects)
> 0.866422 print_debug_deviceinfo      (2):   0x1007 (Get object handles)
> 0.866439 print_debug_deviceinfo      (2):   0x1008 (Get object info)
> 0.866456 print_debug_deviceinfo      (2):   0x1009 (Get object)
> 0.866473 print_debug_deviceinfo      (2):   0x100a (Get thumbnail)
> 0.866489 print_debug_deviceinfo      (2):   0x100b (Delete object)
> 0.866506 print_debug_deviceinfo      (2):   0x100f (Format storage)
> 0.866551 print_debug_deviceinfo      (2):   0x1010 (Reset device)
> 0.866568 print_debug_deviceinfo      (2):   0x1014 (Get device property 
> description)
> 0.866585 print_debug_deviceinfo      (2):   0x1015 (Get device property value)
> 0.866602 print_debug_deviceinfo      (2):   0x1016 (Set device property value)
> 0.866620 print_debug_deviceinfo      (2):   0x101b (Get partial object)
> 0.866636 print_debug_deviceinfo      (2):   0x9801 (Get object properties 
> supported)
> 0.866653 print_debug_deviceinfo      (2):   0x9802 (Get object property 
> description)
> 0.866670 print_debug_deviceinfo      (2):   0x9803 (Get object property value)
> 0.866687 print_debug_deviceinfo      (2):   0x9805 (Get object property list)
> 0.866702 print_debug_deviceinfo      (2): Events Supported:
> 0.866720 print_debug_deviceinfo      (2):   0x4004 (StoreAdded)
> 0.866737 print_debug_deviceinfo      (2):   0x4005 (StoreRemoved)
> 0.866754 print_debug_deviceinfo      (2):   0x4006 (DevicePropChanged)
> 0.866771 print_debug_deviceinfo      (2):   0x4008 (DeviceInfoChanged)
> 0.866788 print_debug_deviceinfo      (2):   0x4009 (RequestObjectTransfer)
> 0.866804 print_debug_deviceinfo      (2):   0x400c (StorageInfoChanged)
> 0.866819 print_debug_deviceinfo      (2): Device Properties Supported:
> 0.866838 print_debug_deviceinfo      (2):   0xd406 (Session Initiator Info)
> 0.866856 print_debug_deviceinfo      (2):   0xd407 (Perceived Device Type)
> 0.866874 print_debug_deviceinfo      (2):   0x5001 (Battery Level)
> 0.866901 ptp_usb_sendreq             (2): Sending PTP_OC 0x1004 (Get storage 
> IDs) request...
> 0.866918 gp_port_write               (3): Writing 12 = 0xc bytes to port...
> 0.866974 gp_port_write               (3): Wrote   12 = 0xc bytes to port: 
> (hexdump of 12 bytes)
> 0000  0c 00 00 00 01 00 04 10-04 00 00 00              ............    
> 
> 0.866998 ptp_usb_getdata             (2): Reading PTP_OC 0x1004 (Get storage 
> IDs) data...
> 0.867020 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.890975 gp_port_read                (3): Read    20 = 0x14 out of 1024 bytes 
> from port: (hexdump of 20 bytes)
> 0000  14 00 00 00 02 00 04 10-04 00 00 00 01 00 00 00  ................
> 0010  01 00 01 00            -                         ....            
> 
> 0.891073 ptp_usb_getresp             (2): Reading PTP_OC 0x1004 (Get storage 
> IDs) response...
> 0.891101 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.891194 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-04 00 00 00              ....... ....    
> 
> 0.891225 ptp                         (2): (storage=0xffffffff, 
> handle=0xffffffff)
> 0.891247 ptp                         (2): Listing ... 
> 0.891279 ptp_usb_sendreq             (2): Sending PTP_OC 0x1007 (Get object 
> handles) (0xffffffff,0x0,0xffffffff) request...
> 0.891308 gp_port_write               (3): Writing 24 = 0x18 bytes to port...
> 0.891391 gp_port_write               (3): Wrote   24 = 0x18 bytes to port: 
> (hexdump of 24 bytes)
> 0000  18 00 00 00 01 00 07 10-05 00 00 00 ff ff ff ff  ................
> 0010  00 00 00 00 ff ff ff ff-                         ........        
> 
> 0.891416 ptp_usb_getdata             (2): Reading PTP_OC 0x1007 (Get object 
> handles) data...
> 0.891433 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.901532 gp_port_read                (3): Read    24 = 0x18 out of 1024 bytes 
> from port: (hexdump of 24 bytes)
> 0000  18 00 00 00 02 00 07 10-05 00 00 00 02 00 00 00  ................
> 0010  00 00 00 81 00 00 00 41-                         .......A        
> 
> 0.901579 ptp_usb_getresp             (2): Reading PTP_OC 0x1007 (Get object 
> handles) response...
> 0.901588 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.901624 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-05 00 00 00              ....... ....    
> 
> 0.901635 ptp                         (2): adding new objectid 0x81000000 
> (nrofobs=0,j=0)
> 0.901658 ptp                         (2): adding new objectid 0x41000000 
> (nrofobs=1,j=1)
> 0.901675 ptp                         (2): (storage=0x00010001, 
> handle=0xffffffff)
> 0.901682 ptp                         (2): Listing ... 
> 0.901692 ptp_usb_sendreq             (2): Sending PTP_OC 0x1007 (Get object 
> handles) (0x10001,0x0,0xffffffff) request...
> 0.901699 gp_port_write               (3): Writing 24 = 0x18 bytes to port...
> 0.901728 gp_port_write               (3): Wrote   24 = 0x18 bytes to port: 
> (hexdump of 24 bytes)
> 0000  18 00 00 00 01 00 07 10-06 00 00 00 01 00 01 00  ................
> 0010  00 00 00 00 ff ff ff ff-                         ........        
> 
> 0.901737 ptp_usb_getdata             (2): Reading PTP_OC 0x1007 (Get object 
> handles) data...
> 0.901744 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.913687 gp_port_read                (3): Read    24 = 0x18 out of 1024 bytes 
> from port: (hexdump of 24 bytes)
> 0000  18 00 00 00 02 00 07 10-06 00 00 00 02 00 00 00  ................
> 0010  00 00 00 81 00 00 00 41-                         .......A        
> 
> 0.913720 ptp_usb_getresp             (2): Reading PTP_OC 0x1007 (Get object 
> handles) response...
> 0.913727 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 0.913767 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-06 00 00 00              ....... ....    
> 
> 0.913776 ptp                         (2): adding old objectid 0x81000000 
> (nrofobs=2,j=1)
> 0.913782 ptp                         (2): adding old objectid 0x41000000 
> (nrofobs=2,j=1)
> 0.913794 gp_context_error            (0): Sorry, your camera does not support 
> generic capture
> 0.913873 gp_camera_capture [gphoto2-camera.c:1340](0): 
> 'camera->functions->capture (camera, type, path, context)' failed: -6
> 0.914290 gp_camera_free              (2): Freeing camera...
> 0.914303 gp_camera_exit              (2): Exiting camera ('Panasonic 
> DMC-FS62')...
> 0.914311 gp_port_get_timeout         (2): Current port timeout is 20000 
> milliseconds.
> 0.914317 gp_port_set_timeout         (2): Setting port timeout to 150 
> milliseconds.
> 0.914323 gp_port_check_int           (3): Reading 24 = 0x18 bytes from 
> interrupt endpoint...
> 1.065144 gp_port_check_int           (3): Reading 24 = 0x18 bytes from 
> interrupt endpoint...
> 1.216179 gp_port_set_timeout         (2): Setting port timeout to 20000 
> milliseconds.
> 1.216308 ptp_usb_sendreq             (2): Sending PTP_OC 0x1003 (Close 
> session) request...
> 1.216345 gp_port_write               (3): Writing 12 = 0xc bytes to port...
> 1.216494 gp_port_write               (3): Wrote   12 = 0xc bytes to port: 
> (hexdump of 12 bytes)
> 0000  0c 00 00 00 01 00 03 10-07 00 00 00              ............    
> 
> 1.216542 ptp_usb_getresp             (2): Reading PTP_OC 0x1003 (Close 
> session) response...
> 1.216562 gp_port_read                (3): Reading 1024 = 0x400 bytes from 
> port...
> 1.217072 gp_port_read                (3): Read    12 = 0xc out of 1024 bytes 
> from port: (hexdump of 12 bytes)
> 0000  0c 00 00 00 03 00 01 20-07 00 00 00              ....... ....    
> 
> 1.217166 gp_port_close               (2): Closing port...
> 1.218003 gp_filesystem_reset         (2): resetting filesystem
> 1.218046 gp_filesystem_lru_clear     (2): Clearing fscache LRU list...
> 1.218063 gp_filesystem_lru_clear     (2): fscache LRU list already empty
> 1.218080 delete_all_folders          (2): Internally deleting all folders 
> from '/'...
> 1.218097 lookup_folder               (2): Lookup folder '/'...
> 1.218115 lookup_folder               (2): Found! / is 0x560d93781690
> 1.218133 recurse_delete_folder       (2): Recurse delete folder 
> 0x560d93781690//
> 1.218149 gp_port_free                (2): Freeing port...
> 1.218165 gp_port_close               (2): Closing port...
> 1.218190 gp_port_usb_close [libusb.c:325](0): Invalid parameters: 'port && 
> port->pl->dh' is NULL/FALSE.
> 1.218313 gp_filesystem_reset         (2): resetting filesystem
> 1.218336 gp_filesystem_lru_clear     (2): Clearing fscache LRU list...
> 1.218351 gp_filesystem_lru_clear     (2): fscache LRU list already empty
> 1.218393 delete_all_folders          (2): Internally deleting all folders 
> from '/'...
> 1.218410 lookup_folder               (2): Lookup folder '/'...
> 1.218427 lookup_folder               (2): Found! / is 0x560d93781690
> 1.218463 recurse_delete_folder       (2): Recurse delete folder 
> 0x560d93781690//

> Camera summary:
> Manufacturer: Panasonic
> Model: DMC-TZ71
>   Version: 1.0
>   Serial Number: 000000000000000000HX1R07030510
> Vendor Extension ID: 0x6 (1.0)
> 
> Capture Formats: 
> Display Formats: Association/Directory, DPOF, Apple Quicktime, Defined Type, 
> JPEG
> Supported MTP Object Properties:
>       Association/Directory/3001: dc01/StorageID dc02/ObjectFormat 
> dc03/ProtectionStatus dc04/ObjectSize dc05/AssociationType 
> dc07/ObjectFileName dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier 
> dc44/Name
>       DPOF/3006: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus 
> dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject 
> dc41/PersistantUniqueObjectIdentifier dc44/Name
>       Apple Quicktime/300d: dc01/StorageID dc02/ObjectFormat 
> dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject 
> dc41/PersistantUniqueObjectIdentifier dc44/Name dc87/Width dc88/Height 
> dc89/Duration de93/SampleRate de94/NumberOfChannels de97/ScanDepth 
> de9a/AudioBitRate de9b/VideoFourCCCodec de9c/VideoBitRate
>       Defined Type/3800: dc01/StorageID dc02/ObjectFormat 
> dc03/ProtectionStatus dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject 
> dc41/PersistantUniqueObjectIdentifier dc44/Name dc87/Width dc88/Height 
> dcd3/ImageBitDepth
>       JPEG/3801: dc01/StorageID dc02/ObjectFormat dc03/ProtectionStatus 
> dc04/ObjectSize dc07/ObjectFileName dc0b/ParentObject 
> dc41/PersistantUniqueObjectIdentifier dc44/Name dc87/Width dc88/Height 
> dcd3/ImageBitDepth
> 
> Device Capabilities:
>       File Download, File Deletion, No File Upload
>       No Image Capture, No Open Capture, No vendor specific capture
> 
> Storage Devices Summary:
> store_00010001:
>       StorageDescription: None
>       VolumeLabel: None
>       Storage Type: Removable RAM (memory card)
>       Filesystemtype: Digital Camera Layout (DCIM)
>       Access Capability: Read-Write
>       Maximum Capability: 15493758976 (14776 MB)
>       Free Space (Bytes): 9641787392 (9195 MB)
>       Free Space (Images): 0
> 
> Device Property Summary:
> Session Initiator Info(0xd406):(readwrite) (type=0xffff) 'Windows/6.2.9200 
> MTPClassDriver/6.2.9200.16384'
> Perceived Device Type(0xd407):(read only) (type=0x6) 1
> Battery Level(0x5001):(read only) (type=0x2) Range [0 - 100, step 10] value: 
> 100% (100)
> 


> _______________________________________________
> Gphoto-devel mailing list
> Gphoto-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel



_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

Reply via email to