Hi,

It needs to be in the "USB mode" where it is remote controllable, which is the 
Mass Storage and not the
PTP Mode.

This can be set in the cameras menu.

I am not sure this will work on OSX, as it conflicts with the mass storage 
assignment.

Ciao, marcus
On Wed, Jan 01, 2020 at 04:32:07PM +0100, Paolo Durandetto wrote:
> Hello. I'm not a developer. I am using version 2.5.23 of gphoto2 but 
> tethering with Pentax K1 does not work.
> I read that support for all pentax cameras should have been added since 
> version 2.5.13 but I can't get it to work.
> 
> I am attaching the message of the OSX terminal app 10.13.6. The firmware 
> version installed on the k1 is the latest available (1.51).
> 
> Can someone help me? Thank you.
> 
> Paolo
> 
> Last login: Wed Jan  1 16:11:15 on ttys000
> You have new mail.
> iMac-di-Paolo:~ paolodurandetto$ env LANG=C gphoto2 --port usb: 
> --capture-image-and-download
>                                                                               
>  
> *** Error ***              
> Sorry, your camera does not support generic capture
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-6: 'Unsupported operation') ***       
> 
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
> gphoto2 as follows:
> 
>     env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --port usb: 
> --capture-image-and-download
> 
> Please make sure there is sufficient quoting around the arguments.
> 
> iMac-di-Paolo:~ paolodurandetto$ 
> 
> 
> 
> Last login: Wed Jan  1 16:21:06 on ttys001
> You have new mail.
> iMac-di-Paolo:~ paolodurandetto$ env LANG=C gphoto2 --debug 
> --debug-logfile=my-logfile.txt --port usb: --capture-image-and-download
>                                                                               
>  
> *** Error ***              
> Sorry, your camera does not support generic capture
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-6: 'Unsupported operation') ***       
> 
> iMac-di-Paolo:~ paolodurandetto$ 


> _______________________________________________
> Gphoto-devel mailing list
> Gphoto-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel



_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

Reply via email to