Hi,
This camera is not yet supported, it seems. I am hereby
provding the information required on the libgphoto2 support
page
The camera is in PTP mode when I try to access the pictures.
I hope that support could be added and I'll be happy to assist
in any way I can.
My OS is FreeBSD 12.1-RELEASE-p3 amd64.
Thanks,
Morten
_Output from "sudo lsusb":_
Bus /dev/usb Device /dev/ugen2.2: ID 04da:2374 Panasonic (Matsushita) Lumix
Camera (PTP mode)
Bus /dev/usb Device /dev/ugen0.3: ID 0483:2016 STMicroelectronics Fingerprint
Reader
Bus /dev/usb Device /dev/ugen0.2: ID 0a5c:2110 Broadcom Corp. BCM2045B (BDC-2)
[Bluetooth Controller]
Bus /dev/usb Device /dev/ugen6.2: ID 17ef:1004 Lenovo Integrated Webcam
Bus /dev/usb Device /dev/ugen3.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen1.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen4.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen5.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen0.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen6.1: ID 0000:0000
Bus /dev/usb Device /dev/ugen2.1: ID 0000:0000
_Output from "gphoto2 --auto-detect":_
Model Port
----------------------------------------------------------
Panasonic DMC-FS62 usb:000,002
Panasonic DMC-FS62 usb:002,002
_Output from "LANG=C gphoto2 --summary:_
*** Error ***
Could not detect any camera
*** Error (-105: 'Unknown model') ***
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --summary
Please make sure there is sufficient quoting around the arguments.
_Output from "LANG=C gphoto2 --list-all-config":_
*** Error ***
Could not detect any camera
*** Error ***
An error occurred in the io-library ('Unknown error'): No error description
available
*** Error (-105: 'Unknown model') ***
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-all-config
Please make sure there is sufficient quoting around the arguments.
_Output from "gphoto2 --capture-image":_
*** Error ***
Could not detect any camera
*** Error (-105: 'Unknown model') ***
For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
gphoto2 as follows:
env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
Please make sure there is sufficient quoting around the arguments.
_Output from gphoto2 --version:_
gphoto2 2.5.23
Copyright (c) 2000-2019 Marcus Meissner and others
gphoto2 comes with NO WARRANTY, to the extent permitted by law. You may
redistribute copies of gphoto2 under the terms of the GNU General Public
License. For more information about these matters, see the files named COPYING.
This version of gphoto2 is using the following software versions and options:
gphoto2 2.5.23 cc, popt(m), exif, no cdk, aa, jpeg, readline
libgphoto2 2.5.23 all camlibs, cc, no ltdl, EXIF
libgphoto2_port 0.12.0 iolibs: disk ptpip usb1 usbdiskdirect usbscsi,
cc, no ltdl, USB, no serial
_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
