Hi,

You likely did not have libusb 1 development headers and libraries, and
built without libusb support.

If you check with "gphoto2 --version"   look if you built with libusb support.

If no, install libusb1-dev or similar named package, and rerun configure ... 
make .. make install

Ciao, Marcus

On Wed, Jul 29, 2020 at 02:52:02PM -0700, Brandon Lampert wrote:
> Marcus,
> 
> I just built libgphoto2 and gphoto2 from github. Both of these seem to
> build. However gphoto2 fails make check. When I run gphoto2 --autodetect no
> camera shows up. What can I do to get this to build properly?
> 
> Thanks,
> Brandon
> 
> 
> 
> On Tue, Jul 7, 2020 at 11:27 AM Brandon Lampert <brandonlamp...@gmail.com>
> wrote:
> 
> > Hi Marcus,
> >
> > I built libgphoto2 from GIT and "gphoto2-config --version" shows that I am
> > running 2.5.25.1. Also, I built gphoto2 from GIT but the logs I sent you
> > yesterday show libgphoto2 version 2.5.16. I am not sure why this is
> > happening. How can I make sure that gphoto2 built from GIT uses libgphoto2
> > I built from GIT?
> >
> > Brandon
> >
> > On Mon, Jul 6, 2020 at 10:18 PM Marcus Meissner <mar...@jet.franken.de>
> > wrote:
> >
> >> Hi,
> >>
> >> From the debuglogs, it seems you did not rebuild libgphoto2 from GIT?
> >>
> >> Can you try to do that?
> >>
> >> Ciao, Marcus
> >> On Mon, Jul 06, 2020 at 01:29:25PM -0700, Brandon Lampert wrote:
> >> > Hi Marcus,
> >> > The camera lens does not open after running any of the listed commands.
> >> > After running "ghoto2 --capture-preview" I got an error and ran the
> >> > recommended debug option. This is attached as my-logfile.txt. During the
> >> > trace I took a picture but am unsure at what point I took it at. I can
> >> do
> >> > another trace without taking a picture if that helps.
> >> >
> >> > Brandon
> >> >
> >> > On Mon, Jul 6, 2020 at 1:22 AM Marcus Meissner <mar...@jet.franken.de>
> >> > wrote:
> >> >
> >> > > Hi,
> >> > >
> >> > > I started to add some code.
> >> > >
> >> > > Can you update libgphoto2 from GIT and run:
> >> > >
> >> > > 1.  gphoto2 --summary --debug --debug-logfile=summary-debug.txt >
> >> > > summary.txt
> >> > >
> >> > >         mail me summary.txt and summary-debug.txt of this please
> >> > >
> >> > > 2. gphoto2 --capture-preview
> >> > >
> >> > >         might work already.... please report if it works or not.
> >> > >
> >> > > 3. gphoto2 --wait-event=30s --debug-logfile=waitevent-debug.txt
> >> --debug
> >> > >
> >> > >         press the shutter button here (and the camera should take a
> >> > > picture)
> >> > >
> >> > >         and send me the waitevent-debug.txt file.
> >> > >
> >> > >
> >> > > Do I understand right you tried to take a picture during below trace?
> >> > >
> >> > >
> >> > > Ciao, Marcus
> >> > >
> >> > > On Tue, Jun 30, 2020 at 06:00:39PM +0200, Marcus Meissner wrote:
> >> > > > Hi,
> >> > > >
> >> > > > This is very helpful, thanks. I will be going over it slowly
> >> > > > and implement things.
> >> > > >
> >> > > > What I see so far is different opcodes used than for Sony Alpha,
> >> > > > so I will need some turn arounds with you for testing :/
> >> > > >
> >> > > > Ciao, Marcus
> >> > > > On Tue, Jun 30, 2020 at 12:05:35AM -0700, Brandon Lampert wrote:
> >> > > > > Hi Marcus,
> >> > > > >
> >> > > > > I tested the following commands through windows with Wireshark
> >> running:
> >> > > > >
> >> > > > > still mode, shutter, zoom in, zoom out, white balance initialize,
> >> movie
> >> > > > > mode, record (displays no memory card error since there is not a
> >> memory
> >> > > > > card inserted ), manual auto focus, focus right button, focus left
> >> > > button,
> >> > > > > still mode, single shot auto focus, 0.3 exposure comp., -0.3
> >> exposure
> >> > > comp.
> >> > > > > 0 exposure com., power off
> >> > > > >
> >> > > > > If it would be helpful I can also do a video screen capture and
> >> run
> >> > > more
> >> > > > > commands.
> >> > > > >
> >> > > > > Brandon
> >> > > > >
> >> > > > >  DSC-QX30WiresharkCap.pcapng.gz
> >> > > > > <
> >> > >
> >> https://drive.google.com/file/d/1PIeOor0LbU1BfDVv_e1LZQ0I2RkemZHC/view?usp=drive_web
> >> > > >
> >> > > > >
> >> > > > > On Sun, Jun 28, 2020 at 11:08 PM Marcus Meissner <
> >> > > mar...@jet.franken.de>
> >> > > > > wrote:
> >> > > > >
> >> > > > > > Hi,
> >> > > > > >
> >> > > > > > What could help if you could get a USB sniff of windows
> >> accessing the
> >> > > > > > camera :/
> >> > > > > >
> >> > > > > > Ciao, Marcus
> >> > > > > > On Mon, Jun 29, 2020 at 07:57:54AM +0200, Marcus Meissner wrote:
> >> > > > > > > Hi,
> >> > > > > > >
> >> > > > > > > I did not have much luck in reverse engineering it yet, and I
> >> have
> >> > > > > > currently
> >> > > > > > > focused on a Sony ZV-1 I borrowed.
> >> > > > > > >
> >> > > > > > > it also seems to have different commands than the other Sony
> >> Alpha
> >> > > :(
> >> > > > > > >
> >> > > > > > > Ciao, Marcus
> >> > > > > > > On Wed, Jun 24, 2020 at 10:15:38AM -0700, Brandon Lampert
> >> wrote:
> >> > > > > > > > Hi Marcus,
> >> > > > > > > >
> >> > > > > > > > How is the work with the QX30 going? Is there any other
> >> > > information
> >> > > > > > from
> >> > > > > > > > the QX30 that would help?
> >> > > > > > > >
> >> > > > > > > > Thanks,
> >> > > > > > > > Brandon
> >> > > > > > > >
> >> > > > > > > > On Wed, Jun 17, 2020 at 11:18 AM Brandon Lampert <
> >> > > > > > brandonlamp...@gmail.com>
> >> > > > > > > > wrote:
> >> > > > > > > >
> >> > > > > > > > > Marcus,
> >> > > > > > > > >
> >> > > > > > > > > I have been using Camera Control Manager Ver.1.1 from
> >> Sony.
> >> > > > > > > > > https://www.sony.net/Products/CameraSystem/CA/UMC_S3CA/
> >> > > > > > > > >
> >> > > > > > > > > Brandon
> >> > > > > > > > >
> >> > > > > > > > > On Wed, Jun 17, 2020 at 1:53 AM Marcus Meissner <
> >> > > meiss...@suse.de>
> >> > > > > > wrote:
> >> > > > > > > > >
> >> > > > > > > > >> Hi,
> >> > > > > > > > >>
> >> > > > > > > > >> On Tue, Jun 16, 2020 at 11:47:56AM -0700, Brandon Lampert
> >> > > wrote:
> >> > > > > > > > >> > Marcus,
> >> > > > > > > > >> >
> >> > > > > > > > >> > Attached is the debug log. The camera is a lens-style
> >> and
> >> > > does
> >> > > > > > not have
> >> > > > > > > > >> a
> >> > > > > > > > >> > way to change the usb mode through a user menu. I
> >> found a
> >> > > > > > collection of
> >> > > > > > > > >> > source code from Sony which may help with tracking down
> >> > > those
> >> > > > > > unknown
> >> > > > > > > > >> PTP
> >> > > > > > > > >> > commands.
> >> > > > > > > > >> >
> >> > > > > > > > >> > https://oss.sony.net/Products/Linux/DI/DSC-QX30.html
> >> > > > > > > > >>
> >> > > > > > > > >> I looked at the link and it sadly is "just" the
> >> opensource
> >> > > parts,
> >> > > > > > > > >> no camera logic parts as far as I see.
> >> > > > > > > > >>
> >> > > > > > > > >> With which Windows tool is this possible? Perhaps I can
> >> take
> >> > > a look
> >> > > > > > at
> >> > > > > > > > >> that.
> >> > > > > > > > >>
> >> > > > > > > > >> ciao, Marcus
> >> > > > > > > > >>
> >> > > > > > > > >
> >> > > > > > >
> >> > > > > > > --
> >> > > > > > > Marcus Meissner,SUSE LINUX GmbH; Maxfeldstrasse 5; D-90409
> >> > > Nuernberg;
> >> > > > > > Zi. 3.1-33,+49-911-740 53-432,,serv=loki,mail=wotan,type=real <
> >> > > > > > meiss...@suse.de>
> >> > > > > >
> >> > > >
> >> > > >
> >> > > > _______________________________________________
> >> > > > Gphoto-devel mailing list
> >> > > > Gphoto-devel@lists.sourceforge.net
> >> > > > https://lists.sourceforge.net/lists/listinfo/gphoto-devel
> >> > >
> >>
> >> > Camera summary:
> >> > Manufacturer: Sony Corporation
> >> > Model: DSC-QX30U
> >> >   Version: 3.00
> >> >   Serial Number: 00000000000000004205000003202433
> >> > Vendor Extension ID: 0x11 (1.0)
> >> > Vendor Extension Description: Sony PTP Extensions
> >> >
> >> > Capture Formats:
> >> > Display Formats: Association/Directory, MPEG, JPEG, Unknown(b982),
> >> Unknown(b301), Undefined Type, ARW, Unknown(b310)
> >> >
> >> > Device Capabilities:
> >> >       File Download, No File Deletion, No File Upload
> >> >       No Image Capture, No Open Capture, No vendor specific capture
> >> >
> >> > Storage Devices Summary:
> >> >
> >> > Device Property Summary:
> >> >
> >>
> >> > 0.000219 main                        (2): ALWAYS INCLUDE THE FOLLOWING
> >> LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
> >> > 0.000338 main                        (2): gphoto2 2.5.23.1
> >> > 0.000374 main                        (2): gphoto2 has been compiled
> >> with the following options:
> >> > 0.000401 main                        (2):  + gcc (C compiler used)
> >> > 0.000424 main                        (2):  + popt (mandatory, for
> >> handling command-line parameters)
> >> > 0.000447 main                        (2):  + exif (for displaying EXIF
> >> information)
> >> > 0.000470 main                        (2):  + cdk (for accessing
> >> configuration options)
> >> > 0.000492 main                        (2):  + no aa (for displaying live
> >> previews)
> >> > 0.000514 main                        (2):  + jpeg (for displaying live
> >> previews in JPEG format)
> >> > 0.000537 main                        (2):  + no readline (for easy
> >> navigation in the shell)
> >> > 0.000560 main                        (2): libgphoto2 2.5.16
> >>
> >

> Making check in libgphoto2_port
> make[1]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port'
> Making check in po
> make[2]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port/po'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port/po'
> Making check in libgphoto2_port
> make[2]: Entering directory 
> '/home/brandon/libgphoto2/libgphoto2_port/libgphoto2_port'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory 
> '/home/brandon/libgphoto2/libgphoto2_port/libgphoto2_port'
> Making check in test
> make[2]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> make  test-port-list
> make[3]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> make[3]: 'test-port-list' is up to date.
> make[3]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> make  check-TESTS
> make[3]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> make[4]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> PASS: test-port-list
> ============================================================================
> Testsuite summary for libgphoto2 port access library 0.12.0
> ============================================================================
> # TOTAL: 1
> # PASS:  1
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  0
> # XPASS: 0
> # ERROR: 0
> ============================================================================
> make[4]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> make[3]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> make[2]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port/test'
> Making check in .
> make[2]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port'
> make[2]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port'
> Making check in doc
> make[2]: Entering directory '/home/brandon/libgphoto2/libgphoto2_port/doc'
> Dummy target all-local.
> make[2]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port/doc'
> Making check in gphoto-m4
> make[2]: Entering directory 
> '/home/brandon/libgphoto2/libgphoto2_port/gphoto-m4'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory 
> '/home/brandon/libgphoto2/libgphoto2_port/gphoto-m4'
> make[1]: Leaving directory '/home/brandon/libgphoto2/libgphoto2_port'
> Making check in libgphoto2
> make[1]: Entering directory '/home/brandon/libgphoto2/libgphoto2'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/libgphoto2/libgphoto2'
> Making check in camlibs
> make[1]: Entering directory '/home/brandon/libgphoto2/camlibs'
> Making check in .
> make[2]: Entering directory '/home/brandon/libgphoto2/camlibs'
> make[2]: Leaving directory '/home/brandon/libgphoto2/camlibs'
> Making check in canon/doc
> make[2]: Entering directory '/home/brandon/libgphoto2/camlibs/canon/doc'
> Dummy target all-local.
> make[2]: Leaving directory '/home/brandon/libgphoto2/camlibs/canon/doc'
> Making check in konica/localization
> make[2]: Entering directory 
> '/home/brandon/libgphoto2/camlibs/konica/localization'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory 
> '/home/brandon/libgphoto2/camlibs/konica/localization'
> make[1]: Leaving directory '/home/brandon/libgphoto2/camlibs'
> Making check in tests
> make[1]: Entering directory '/home/brandon/libgphoto2/tests'
> Making check in ddb
> make[2]: Entering directory '/home/brandon/libgphoto2/tests/ddb'
> make  check-am
> make[3]: Entering directory '/home/brandon/libgphoto2/tests/ddb'
> make   
> make[4]: Entering directory '/home/brandon/libgphoto2/tests/ddb'
> make  all-am
> make[5]: Entering directory '/home/brandon/libgphoto2/tests/ddb'
> make[5]: Nothing to be done for 'all-am'.
> make[5]: Leaving directory '/home/brandon/libgphoto2/tests/ddb'
> make[4]: Leaving directory '/home/brandon/libgphoto2/tests/ddb'
> make[3]: Leaving directory '/home/brandon/libgphoto2/tests/ddb'
> make[2]: Leaving directory '/home/brandon/libgphoto2/tests/ddb'
> make[2]: Entering directory '/home/brandon/libgphoto2/tests'
> make  test-endian test-camera-list test-pedantic-c test-pedantic-cxx 
> test-pedantic-c90 test-pedantic-c99 test-pedantic-c11 test-pedantic-cxx98 
> test-pedantic-cxx11 test-pedantic-cxx14 test-pedantic-cxx17
> make[3]: Entering directory '/home/brandon/libgphoto2/tests'
> make[3]: 'test-endian' is up to date.
> make[3]: 'test-camera-list' is up to date.
> make[3]: 'test-pedantic-c' is up to date.
> make[3]: 'test-pedantic-cxx' is up to date.
> make[3]: 'test-pedantic-c90' is up to date.
> make[3]: 'test-pedantic-c99' is up to date.
> make[3]: 'test-pedantic-c11' is up to date.
> make[3]: 'test-pedantic-cxx98' is up to date.
> make[3]: 'test-pedantic-cxx11' is up to date.
> make[3]: 'test-pedantic-cxx14' is up to date.
> make[3]: 'test-pedantic-cxx17' is up to date.
> make[3]: Leaving directory '/home/brandon/libgphoto2/tests'
> make  check-TESTS
> make[3]: Entering directory '/home/brandon/libgphoto2/tests'
> make[4]: Entering directory '/home/brandon/libgphoto2/tests'
> PASS: test-endian
> PASS: test-camera-list
> PASS: test-pedantic-c
> PASS: test-pedantic-cxx
> PASS: test-pedantic-c90
> PASS: test-pedantic-c99
> PASS: test-pedantic-c11
> PASS: test-pedantic-cxx98
> PASS: test-pedantic-cxx11
> PASS: test-pedantic-cxx14
> PASS: test-pedantic-cxx17
> ============================================================================
> Testsuite summary for libgphoto2 photo camera library 2.5.25.1
> ============================================================================
> # TOTAL: 11
> # PASS:  11
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  0
> # XPASS: 0
> # ERROR: 0
> ============================================================================
> make[4]: Leaving directory '/home/brandon/libgphoto2/tests'
> make[3]: Leaving directory '/home/brandon/libgphoto2/tests'
> make[2]: Leaving directory '/home/brandon/libgphoto2/tests'
> make[1]: Leaving directory '/home/brandon/libgphoto2/tests'
> Making check in examples
> make[1]: Entering directory '/home/brandon/libgphoto2/examples'
> make   
> make[2]: Entering directory '/home/brandon/libgphoto2/examples'
> make[2]: Nothing to be done for 'all'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/examples'
> make[1]: Leaving directory '/home/brandon/libgphoto2/examples'
> Making check in po
> make[1]: Entering directory '/home/brandon/libgphoto2/po'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/libgphoto2/po'
> Making check in packaging
> make[1]: Entering directory '/home/brandon/libgphoto2/packaging'
> Making check in linux-hotplug
> make[2]: Entering directory '/home/brandon/libgphoto2/packaging/linux-hotplug'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/packaging/linux-hotplug'
> Making check in generic
> make[2]: Entering directory '/home/brandon/libgphoto2/packaging/generic'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/packaging/generic'
> Making check in rpm
> make[2]: Entering directory '/home/brandon/libgphoto2/packaging/rpm'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/packaging/rpm'
> make[2]: Entering directory '/home/brandon/libgphoto2/packaging'
> make[2]: Nothing to be done for 'check-am'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/packaging'
> make[1]: Leaving directory '/home/brandon/libgphoto2/packaging'
> Making check in doc
> make[1]: Entering directory '/home/brandon/libgphoto2/doc'
> Making check in api
> make[2]: Entering directory '/home/brandon/libgphoto2/doc/api'
> Dummy target all-local.
> make[2]: Leaving directory '/home/brandon/libgphoto2/doc/api'
> make[2]: Entering directory '/home/brandon/libgphoto2/doc'
> make[2]: Nothing to be done for 'check-am'.
> make[2]: Leaving directory '/home/brandon/libgphoto2/doc'
> make[1]: Leaving directory '/home/brandon/libgphoto2/doc'
> Making check in gphoto-m4
> make[1]: Entering directory '/home/brandon/libgphoto2/gphoto-m4'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/libgphoto2/gphoto-m4'
> make[1]: Entering directory '/home/brandon/libgphoto2'
> make[1]: Leaving directory '/home/brandon/libgphoto2'

> Making check in gphoto-m4
> make[1]: Entering directory '/home/brandon/gphoto2/gphoto-m4'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/gphoto2/gphoto-m4'
> Making check in contrib
> make[1]: Entering directory '/home/brandon/gphoto2/contrib'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/gphoto2/contrib'
> Making check in doc
> make[1]: Entering directory '/home/brandon/gphoto2/doc'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/gphoto2/doc'
> Making check in gphoto2
> make[1]: Entering directory '/home/brandon/gphoto2/gphoto2'
> make  spawntest
> make[2]: Entering directory '/home/brandon/gphoto2/gphoto2'
> make[2]: 'spawntest' is up to date.
> make[2]: Leaving directory '/home/brandon/gphoto2/gphoto2'
> make  check-TESTS
> make[2]: Entering directory '/home/brandon/gphoto2/gphoto2'
> make[3]: Entering directory '/home/brandon/gphoto2/gphoto2'
> PASS: spawntest
> ============================================================================
> Testsuite summary for gphoto2 command line interface 2.5.23.1
> ============================================================================
> # TOTAL: 1
> # PASS:  1
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  0
> # XPASS: 0
> # ERROR: 0
> ============================================================================
> make[3]: Leaving directory '/home/brandon/gphoto2/gphoto2'
> make[2]: Leaving directory '/home/brandon/gphoto2/gphoto2'
> make[1]: Leaving directory '/home/brandon/gphoto2/gphoto2'
> Making check in packaging
> make[1]: Entering directory '/home/brandon/gphoto2/packaging'
> Making check in rpm
> make[2]: Entering directory '/home/brandon/gphoto2/packaging/rpm'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory '/home/brandon/gphoto2/packaging/rpm'
> make[2]: Entering directory '/home/brandon/gphoto2/packaging'
> make[2]: Nothing to be done for 'check-am'.
> make[2]: Leaving directory '/home/brandon/gphoto2/packaging'
> make[1]: Leaving directory '/home/brandon/gphoto2/packaging'
> Making check in po
> make[1]: Entering directory '/home/brandon/gphoto2/po'
> make[1]: Nothing to be done for 'check'.
> make[1]: Leaving directory '/home/brandon/gphoto2/po'
> Making check in tests
> make[1]: Entering directory '/home/brandon/gphoto2/tests'
> Making check in data
> make[2]: Entering directory '/home/brandon/gphoto2/tests/data'
> make[2]: Nothing to be done for 'check'.
> make[2]: Leaving directory '/home/brandon/gphoto2/tests/data'
> Making check in staging
> make[2]: Entering directory '/home/brandon/gphoto2/tests/staging'
> Making check in subdir1
> make[3]: Entering directory '/home/brandon/gphoto2/tests/staging/subdir1'
> make[3]: Nothing to be done for 'check'.
> make[3]: Leaving directory '/home/brandon/gphoto2/tests/staging/subdir1'
> Making check in subdir2
> make[3]: Entering directory '/home/brandon/gphoto2/tests/staging/subdir2'
> make[3]: Nothing to be done for 'check'.
> make[3]: Leaving directory '/home/brandon/gphoto2/tests/staging/subdir2'
> make[3]: Entering directory '/home/brandon/gphoto2/tests/staging'
> make[3]: Nothing to be done for 'check-am'.
> make[3]: Leaving directory '/home/brandon/gphoto2/tests/staging'
> make[2]: Leaving directory '/home/brandon/gphoto2/tests/staging'
> make[2]: Entering directory '/home/brandon/gphoto2/tests'
> make  check-TESTS
> make[3]: Entering directory '/home/brandon/gphoto2/tests'
> make[4]: Entering directory '/home/brandon/gphoto2/tests'
> FAIL: testsuite
> ============================================================================
> Testsuite summary for gphoto2 command line interface 2.5.23.1
> ============================================================================
> # TOTAL: 1
> # PASS:  0
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  1
> # XPASS: 0
> # ERROR: 0
> ============================================================================
> See tests/test-suite.log
> Please report to gphoto-devel@lists.sourceforge.net
> ============================================================================
> Makefile:723: recipe for target 'test-suite.log' failed
> make[4]: Leaving directory '/home/brandon/gphoto2/tests'
> Makefile:829: recipe for target 'check-TESTS' failed
> make[3]: Leaving directory '/home/brandon/gphoto2/tests'
> Makefile:927: recipe for target 'check-am' failed
> make[2]: Leaving directory '/home/brandon/gphoto2/tests'
> Makefile:616: recipe for target 'check-recursive' failed
> make[1]: Leaving directory '/home/brandon/gphoto2/tests'
> Makefile:465: recipe for target 'check-recursive' failed


> _______________________________________________
> Gphoto-devel mailing list
> Gphoto-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel


-- 
Marcus Meissner,SUSE LINUX GmbH; Maxfeldstrasse 5; D-90409 Nuernberg; Zi. 
3.1-33,+49-911-740 53-432,,serv=loki,mail=wotan,type=real <meiss...@suse.de>


_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

Reply via email to