Hi,

On Fri, Dec 18, 2020 at 04:56:05PM -0800, Avionyx wrote:
> Hello,
> I have performed the operations to install gphoto2 on my brand new RPi3B+.
> gphoto2 is able to detect my Canon EOS M50 but when I run the capture
> command I get this error:
> *** Error *** An error occurred in the library ('Could not claim the UDB
> device'): Could not claim interface 0 (Device or resource busy). Make sure
> no other program (gvfs-gphoto2-volume-monitor) or kernel module (such as
> sdc2xx, stv680, spca50x) is using the device and you have read/write access
> to the device.
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-53: 'Could not claim the USB device') ***


This pretty much means what it says. Something else blocks the camera
access. For the Raspberry it is gvfs usually.

See if

        gio mount -s gphoto2

helps to disable this?

Ciao, Marcus


_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel

Reply via email to