Hi, Fuji supports remote control over USB only for their higher end X series.
likely a bit along this compat list: https://fujifilm-x.com/de-de/support/compatibility/software/x-acquire They retrofitted webcam / liveview streaming to some lower end X models, list here: too, https://fujifilm-x.com/de-de/support/compatibility/software/x-webcam/ No X-E1 on the lists, sorry. Ciao, Marcus On Sun, Feb 28, 2021 at 06:36:33AM +0100, Alejandro Cid Roldan wrote: > Hello, > > I am trying to use my Fujifilm X-E1 camera with Octolapse. > > After much reading and due to my little knowledge, I get in touch with you > to find out if the camera is really compatible. > > If so, I would like to know the steps to follow. > > pi@octopi:~ $ gphoto2 --auto-detect > Model Port > ---------------------------------------------------------- > USB PTP Class Camera usb:001,007 > > pi@octopi:~ $ gphoto2 --capture-image > > *** Error *** > Sorry, your camera does not support generic capture > ERROR: Could not capture image. > ERROR: Could not capture. > *** Error (-6: 'Unsupported operation') *** > > For debugging messages, please use the --debug option. > Debugging messages may help finding a solution to your problem. > If you intend to send any error or debug messages to the gphoto > developer mailing list <gphoto-devel@lists.sourceforge.net>, please run > gphoto2 as follows: > > env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt > --capture-image > > Please make sure there is sufficient quoting around the arguments. > > Many thanks for everything. > > > Regards, Alex > _______________________________________________ > Gphoto-devel mailing list > Gphoto-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gphoto-devel _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
