Hi,
Can you switch it to PTP or PictBridge mode?
Only in this mode it will be accessible or potentially controlable libgphoto2.
Ciao, Marcus
On Tue, May 17, 2022 at 03:21:03PM -0700, Larry Griffin wrote:
>
> Hope I got everything, if there is anything I can do, please let me know.
>
> Larry
>
> a USB mass storage based camera (appearing like a USB stick or USB drive) it
> is mounted by your operating system and not gphoto2. In this case a report
> to us is not necessary.
> Record the output of lsusb to get the USB ids.
> #
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
> Bus 001 Device 019: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet
> K-2024 Multimedia Keyboard
> Bus 001 Device 005: ID 0cf3:e007 Qualcomm Atheros Communications
> Bus 001 Device 004: ID 0bda:58f6 Realtek Semiconductor Corp.
> Integrated_Webcam_HD
> Bus 001 Device 020: ID 07b4:012e Olympus Optical Co., Ltd E-PL6
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> #
> Record the output of gphoto2 --auto-detect to see if it is detected in a
> # gphoto2 --auto-detect
> Model Port
> ----------------------------------------------------------
> #
> # generic way, or by another name. If it is detected already, run the steps
> below:
> Record the output of LANG=C gphoto2 --summary >summary.txt to get
> generic summary information into the summary.txt file.
> # LANG=C gphoto2 --summary >summary.txt
>
> *** Error ***
> Could not detect any camera
> *** Error (-105: 'Unknown model') ***
> #
> Record the output of LANG=C gphoto2 --list-all-config >config.txt to get
> the configuration tree into the config.txt file.
> #LANG=C gphoto2 --list-all-config >config.txt
>
> *** Error ***
> Could not detect any camera
>
> *** Error ***
> An error occurred in the io-library ('Unknown error'): No error description
> available
> *** Error (-105: 'Unknown model') ***
> #
> Record the output of gphoto2 --capture-image to see if capture works
> already.
> #
> gphoto2 --capture-image
>
> *** Error ***
> Could not detect any camera
> *** Error (-105: 'Unknown model') ***
>
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
> gphoto2 as follows:
>
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt
> --capture-image
>
> Please make sure there is sufficient quoting around the arguments.
> #env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
>
> *** Error ***
> Could not detect any camera
> *** Error (-105: 'Unknown model') ***
>
>
>
>
> _______________________________________________
> Gphoto-devel mailing list
> Gphoto-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel
_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
