Thanks for the info, I am familiar with basic git but don't have much experience building from source. That said I wont have access to that machine or camera for a few days. I'll give it a try when I do.
On Sun, Aug 28, 2022, 09:54 Marcus Meissner <mar...@jet.franken.de> wrote: > Hi, > > If you are not familar with working with GIT, this is a bit tricky perhaps, > and please do not spend too much time on it. > > To proceed make sure you have libusb 1 development headers + libs > installed, and > also automake, autoconf, libtool, and make. > > Then > git clone https://github.com/gphoto/libgphoto2.git > > cd libgphoto2 > autoreconf -i -f > ./configure --prefix=/usr > > ( check if there were errors, and also if USB is enabled) > > make > sudo make install > > Now "gphoto2 --version" should report libgphoto2 2.5.30.1 as version > and testing could be done. > > If this is too difficult, its fine not to test here ... the code will also > be in 2.5.31 once it getst released and gets delivered over regular > distribution > updates. > > Note that we are only replacing the libgphoto2 library, the "gphoto2" > userland > tool will use the replaced library. > > Ciao, Marcus > > On Sat, Aug 27, 2022 at 07:59:16AM -0400, Joey Seal wrote: > > I have an M200 but I have always installed it from a package manager so I > > am not sure how to build from source. After following > > https://github.com/gphoto/libgphoto2/blob/master/INSTALL Im not sure > how to > > run libgphoto2 > > > > joey@T480-1 ~> whereis libgphoto2 > > libgphoto2: /usr/lib/libgphoto2 /usr/share/libgphoto2 > > /usr/share/man/man3/libgphoto2.3.gz > > ~> tree /usr/lib/libgphoto2 > > /usr/lib/libgphoto2 > > ├── 2.5.30 > > │ ├── ax203.so > > │ ├── canon.so > > │ ├── digigr8.so > > │ ├── dimagev.so > > │ ├── directory.so > > │ ├── docupen.so > > │ ├── jl2005a.so > > │ ├── jl2005c.so > > │ ├── kodak_dc240.so > > │ ├── lumix.so > > │ ├── mars.so > > │ ├── pentax.so > > │ ├── ptp2.so > > │ ├── ricoh_g3.so > > │ ├── sierra.so > > │ ├── sonix.so > > │ ├── sq905.so > > │ ├── st2205.so > > │ ├── topfield.so > > │ └── tp6801.so > > └── print-camera-list > > > > 1 directory, 21 files > > ~> tree /usr/share/libgphoto2/ > > /usr/share/libgphoto2/ > > └── 2.5.30 > > └── konica > > ├── english > > ├── french > > ├── german > > ├── japanese > > ├── korean > > └── spanish > > > > 2 directories, 6 files > > joey@T480-1 ~> > > > > On Sat, Aug 27, 2022 at 7:29 AM Marcus Meissner <mar...@jet.franken.de> > > wrote: > > > > > Hi, > > > > > > I am currently improving the OLC handling for Canon EOS / recent > PowerShot. > > > > > > OLC info provides a binary blob of quick changing data, like aperture, > iso, > > > shutterspeed, buttons, focusinfo ... and also shuttercounter > apparently. > > > > > > As the sizes are not in the format, I currently have handcoded them. > > > > > > To verify our current sets, can owners of Canon EOS and capture capable > > > recent PowerShot build and install "libgphoto2" from current GIT > > > and run: > > > > > > gphoto2 --set-config testolc=1 --debug --debug-logfile=olc.log > > > > > > And mail me the olc.log? > > > > > > Ciao, Marcus > > > > > > > > > _______________________________________________ > > > Gphoto-user mailing list > > > gphoto-u...@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/gphoto-user > > > >
_______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
