Hi, You could you just try --capture-image and see if that works, which would not start liveview.
Ciao, Marcus On Wed, Mar 01, 2023 at 08:59:09AM +0000, Kindschi Valentin wrote: > Hi, > > Thanks for the quick answer. I don't have a physical access to the camera > (installed in a remote location). Is there a way to test liveview remotely ? > Is there a command to disable liveview remotely and take images without it ? > (would it help ?) > > Cheers, > Valentin > > -----Original Message----- > From: Marcus Meissner <mar...@jet.franken.de> > Sent: Wednesday, 1 March 2023 09:55 > To: Kindschi Valentin <valentin.kinds...@epfl.ch> > Cc: gphoto-devel@lists.sourceforge.net > Subject: Re: [gphoto-devel] gphoto2 Unspecified error: Liveview cannot start: > Sequence error > > Hi, > > "sequence error" is reported by the camera as "liveview blocker". > > Given the long usage time, it might be hardware related. > > Does liveview work on the camera itself still? > > Ciao, Marcus > > On Wed, Mar 01, 2023 at 08:37:18AM +0000, Kindschi Valentin via Gphoto-devel > wrote: > > Hello, > > > > I have a Nikon DSC D5600 wired to a Raspberry Pi taking a picture every > > minute. This setup worked for months and suddenly stopped working > > yesterday. The error message is: > > > > *** Error *** > > Liveview cannot start: Sequence error > > *** Error (-1: 'Unspecified error') *** > > > > I restarted the camera, but it doesn’t help. > > I added to this mail the output of “env LANG=C gphoto2 --debug > > --debug-logfile=my-logfile.txt --capture-preview”, do you see anything > > suspicious ? > > > > Thank you very much, _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
