Hi, Thanks for the report!
Your lsusb output not show the Canon R3 usb id, can you check that you run it when the camera is attached (same time as autodetect)? Ciao, Marcus On Mon, Oct 30, 2023 at 04:23:30PM -0600, Darral Freund wrote: > Hello, > > I’m requesting gphoto2 support for a Canon R3 mirrorless camera. The > requested data is supplied below. If you need anything else (images, etc.) > please let me know. > > Thanks, > > Darral Freund > > This was run on Ubuntu 22.04 running on a Parallels VM on a M2 MacBook Pro. > > Output of lusb: > > Bus 003 Device 005: ID 203a:fff9 PARALLELS Darrals iPhone 13 Camera > Bus 003 Device 004: ID 203a:fff9 PARALLELS FaceTime HD Camera > Bus 003 Device 003: ID 203a:fffb PARALLELS Virtual Keyboard > Bus 003 Device 002: ID 203a:fffc PARALLELS Virtual Mouse > Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 004: ID 203a:fffa PARALLELS Virtual Printer (Epson V600 Photo) > Bus 001 Device 003: ID 203a:fffa PARALLELS Virtual Printer (EPSON ET-4550 > Series) > Bus 001 Device 002: ID 203a:fffa PARALLELS Virtual Printer (EPSON ET-4550 > Series - Fax) > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > Output of gphoto2 — auto-detect: > > Model Port > > ---------------------------------------------------------- > USB PTP Class Camera usb:003,007 _______________________________________________ Gphoto-devel mailing list Gphoto-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gphoto-devel
