Hi,
The camera is not known to us yet.
It seems to be an action cam, which likely might not allow remote control.
Is it exposed via USB storage?
Is there any software allowing remote control?
Can you post lsusb -v output for the camera?
Ciao, Marcus
On Sun, Mar 24, 2024 at 04:42:27PM +0000, Thibaut TURRIER wrote:
> Bonjour,
>
> J'aimerais arriver à faire fonctionner ma caméra TAKARA CAM MV137 sur gphoto2.
>
> Je suis sur RPI 3 Bullseye.
>
> Voici les informations :
>
> * Lsusb :
> Bus 001 Device 015: ID 1f3a:1002 Allwinner Technology mediacom XPRO 415
>
> * gphoto2 --auto-detect :
> Model Port
> ----------------------------------------------------------
>
> * LANG=C gphoto2 --summary >summary.txt
> *** Error ***
> Could not detect any camera
> *** Error (-105: 'Unknown model') ***
>
> * LANG=C gphoto2 --list-all-config >config.txt
> *** Error ***
> Could not detect any camera
> *** Error ***
> An error occurred in the io-library ('Unknown error'): No error description
> available
> *** Error (-105: 'Unknown model') ***
>
> * gphoto2 --capture-image
> *** Error ***
> Could not detect any camera
> *** Error (-105: 'Unknown model') ***
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list
> gphoto-devel@lists.sourceforge.net<mailto:gphoto-devel@lists.sourceforge.net>,
> please run
> gphoto2 as follows:
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
> Please make sure there is sufficient quoting around the arguments.
>
> Je vous remercie,
> Cordialement,
>
> Thibaut TURRIER
> thibaut.turr...@hotmail.fr<mailto:thibaut.turr...@hotmail.fr>
>
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
> gphoto2 as follows:
>
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt
> --list-all-config
>
> Please make sure there is sufficient quoting around the arguments.
>
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
> gphoto2 as follows:
>
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --summary
>
> Please make sure there is sufficient quoting around the arguments.
>
> _______________________________________________
> Gphoto-devel mailing list
> Gphoto-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel
_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
