HI,
gphoto2 here detects your iPhone first.
If you unplug it, it will select the Canon camera.
Or run
gphoto2 --auto-detect
(find the usb:XXX,YYY combination for the Canon)
gphoto2 --port usb:XXX,YYY ... command ...
Ciao, Marcus
On Tue, Oct 15, 2024 at 05:57:48PM +0000, keith wrote:
> Greetings, Perhaps you could help me get my camera connected.
>
> Laptop - Swift-SF315-52-dd89c2b9
>
> os - elementary OS 7.1 Horus
>
> Firmware - attached file, Screenshot from 2024-10-15 17.50.17
>
> Many thanks
>
> Projects :: libgphoto2 :: supported cameras
>
> On this page, you find list of the supported cameras as of the current
> release.
>
> Supported means here: Able to download images from the camera (or upload
> images to the picture frame). For remote control support check out the Remote
> Control Overview page.
>
> Support for additional cameras may be in the current libgphoto2 SVN trunk
> code and will be added to the next release. Cameras capable of MTP, PTP or
> PictBridge are supported without needing to be specifically listed here.
>
> If your camera is neither supported in the current release nor in current SVN
> trunk, it is possible that
>
> it is an old camera for which the original gPhoto driver has not been ported
> yet (mostly due to lack of demand)
> it is a new camera for which there is no support at all
> To report a not yet supported camera to the gphoto development team follow
> the instructions below:
>
> If it a USB mass storage based camera (appearing like a USB stick or USB
> drive) it is mounted by your operating system and not gphoto2. In this case a
> report to us is not necessary.
> Record the output of lsusb to get the USB ids.
> Record the output of gphoto2 --auto-detect to see if it is detected in a
> generic way, or by another name. If it is detected already, run the steps
> below:
> Record the output of LANG=C gphoto2 --summary >summary.txt to get generic
> summary information into the summary.txt file.
> Record the output of LANG=C gphoto2 --list-all-config >config.txt to get the
> configuration tree into the config.txt file.
> Record the output of gphoto2 --capture-image to see if capture works already.
> Mail the output results with the camera name to
> gphoto-devel@lists.sourceforge.net.
> Please note that PTP cameras will already work out of the box, including
> special vendor features if we already implemented them.
>
> ------------------------------------------------------------------------------------------
> steve@Swift-SF315-52-dd89c2b9:~$ lsusb
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 007: ID 1c7a:0570 LighTuning Technology Inc. EgisTec Touch
> Fingerprint Sensor
> Bus 001 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card
> Reader Controller
> Bus 001 Device 005: ID 04f2:b5c5 Chicony Electronics Co., Ltd HD WebCam
> Bus 001 Device 004: ID 8087:0a2a Intel Corp. Bluetooth wireless interface
> Bus 001 Device 003: ID 8510:13ab Telink Wireless Receiver
> Bus 001 Device 002: ID 05ac:12a8 Apple, Inc. iPhone 5/5C/5S/6/SE
> Bus 001 Device 013: ID 04a9:32f9 Canon, Inc. Canon Digital Camera
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> steve@Swift-SF315-52-dd89c2b9:~$
>
> --------------------------------------------------------------------------------------
> steve@Swift-SF315-52-dd89c2b9:~$ gphoto2 --auto-detect
> Model Port
>
> ----------------------------------------------------------
> Apple iPhone 5 (PTP mode) usb:001,002
> USB PTP Class Camera usb:001,013
> steve@Swift-SF315-52-dd89c2b9:~$
>
> ---------------------------------------------------------------------------------------
> steve@Swift-SF315-52-dd89c2b9:~$ LANG=C gphoto2 --summary
> Camera summary:
>
> Manufacturer: Apple Inc.
> Model: Apple iPhone
> Version: 16.7.8
> Serial Number: FD4Y7416JCM4
> Vendor Extension ID: 0x6 (15.20)
> Vendor Extension Description: ICPE^0&CPLS^0
> PTP Standard Version: 1.10
>
> Capture Formats: Association/Directory JPEG PNG TIFF
> Display Formats: Undefined Type, Association/Directory, Script, AIFF, MS
> Wave, MP3, MS AVI, MPEG, ASF, Apple Quicktime, JPEG, PNG, TIFF,
> Unknown(b401), Unknown(b402), Unknown(b421)
> Supported MTP Object Properties:
> Undefined Type/3000: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> Association/Directory/3001: dc01/StorageID dc02/ObjectFormat
> dc04/ObjectSize dc07/ObjectFileName dc08/DateCreated dc09/DateModified
> dc0b/ParentObject dc41/PersistantUniqueObjectIdentifier
> Script/3002: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> AIFF/3007: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> MS Wave/3008: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> MP3/3009: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> MS AVI/300a: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> MPEG/300b: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> ASF/300c: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> Apple Quicktime/300d: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> JPEG/3801: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> PNG/380b: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> TIFF/380d: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> Unknown(b401)/b401: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> Unknown(b402)/b402: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
> Unknown(b421)/b421: dc01/StorageID dc02/ObjectFormat dc04/ObjectSize
> dc07/ObjectFileName dc08/DateCreated dc09/DateModified dc0b/ParentObject
> dc41/PersistantUniqueObjectIdentifier
>
> Device Capabilities:
> File Download, File Deletion, No File Upload
> No Image Capture, No Open Capture, No vendor specific capture
>
> Storage Devices Summary:
> store_00010001:
> StorageDescription: Internal Storage
> VolumeLabel: Internal Storage
> Storage Type: Builtin RAM
> Filesystemtype: Digital Camera Layout (DCIM)
> Access Capability: Read-Write
> Maximum Capability: 64000000000 (61035 MB)
> Free Space (Bytes): 17418334208 (16611 MB)
> Free Space (Images): 11612
>
> Device Property Summary:
> Property 0xd302:(read only) (type=0xa) Unknown a
> Property 0xda07: error 200a on query.
>
> steve@Swift-SF315-52-dd89c2b9:~$
>
> ------------------------------------------------------------------------------------
> steve@Swift-SF315-52-dd89c2b9:~$ LANG=C gphoto2 --list-all-config
> /main/actions/opcode
>
> Label: PTP Opcode
> Readonly: 0
> Type: TEXT
> Current: 0x1001,0xparam1,0xparam2
> END
> /main/status/serialnumber
> Label: Serial Number
> Readonly: 0
> Type: TEXT
> Current: FD4Y7416JCM4
> END
> /main/status/manufacturer
> Label: Camera Manufacturer
> Readonly: 0
> Type: TEXT
> Current: Apple Inc.
> END
> /main/status/cameramodel
> Label: Camera Model
> Readonly: 0
> Type: TEXT
> Current: Apple iPhone
> END
> /main/status/deviceversion
> Label: Device Version
> Readonly: 0
> Type: TEXT
> Current: 16.7.8
> END
> /main/status/vendorextension
> Label: Vendor Extension
> Readonly: 0
> Type: TEXT
> Current: ICPE^0&CPLS^0
> END
> /main/other/d302
> Label: PTP Property 0xd302
> Readonly: 1
> Type: TEXT
> Current: (null)
> END
> steve@Swift-SF315-52-dd89c2b9:~$
>
> ------------------------------------------------------------------------------------
>
>
> *** Error ***
> Sorry, your camera does not support generic capture
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-6: 'Unsupported operation') ***
>
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <gphoto-devel@lists.sourceforge.net>, please run
> gphoto2 as follows:
>
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
>
> Please make sure there is sufficient quoting around the arguments.
>
> steve@Swift-SF315-52-dd89c2b9:~$ env LANG=C gphoto2 --debug
> --debug-logfile=my-logfile.txt --capture-image
>
>
> *** Error ***
> Sorry, your camera does not support generic capture
> ERROR: Could not capture image.
> ERROR: Could not capture.
> *** Error (-6: 'Unsupported operation') ***
>
> ------------------------------------------------------------------------------------
> 0.000036 main (2): ALWAYS INCLUDE THE FOLLOWING LINES
> WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
> 0.000165 main (2): gphoto2 2.5.27
> 0.000188 main (2): gphoto2 has been compiled with the
> following options:
> 0.000204 main (2): + gcc (C compiler used)
> 0.000217 main (2): + popt (mandatory, for handling
> command-line parameters)
> 0.000230 main (2): + exif (for displaying EXIF
> information)
> 0.000244 main (2): + cdk (for accessing configuration
> options)
> 0.000258 main (2): + aa (for displaying live previews)
> 0.000272 main (2): + jpeg (for displaying live
> previews in JPEG format)
> 0.000286 main (2): + readline (for easy navigation in
> the shell)
> 0.000324 main (2): libgphoto2 2.5.27
> 0.000366 main (2): libgphoto2 has been compiled with
> the following options:
> 0.000404 main (2): + standard camlib set (ax203 canon
> digigr8 dimagev directory docupen jl2005a jl2005c kodak_dc240 lumix mars
> pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801)
> 0.000421 main (2): + gcc (C compiler used)
> 0.000435 main (2): + ltdl (for portable loading of
> camlibs)
> 0.000451 main (2): + EXIF (for special handling of
> EXIF files)
> 0.000477 main (2): libgphoto2_port 0.12.0
> 0.000494 main (2): libgphoto2_port has been compiled
> with the following options:
> 0.000507 main (2): + iolibs: disk ptpip serial usb1
> usbdiskdirect usbscsi
> 0.000520 main (2): + gcc (C compiler used)
> 0.000533 main (2): + ltdl (for portable loading of
> iolibs)
> 0.000546 main (2): + EXIF (for vusb)
> 0.000559 main (2): + USB (libusb1, for USB cameras)
> 0.000572 main (2): + serial (for serial cameras)
> 0.000585 main (2): + no resmgr (serial port access
> and locking)
> 0.000603 main (2): + no ttylock (serial port locking)
> 0.000627 main (2): + no lockdev (serial port locking)
> 0.000658 main (2): CAMLIBS env var not set, using
> compile-time default instead
> 0.000676 main (2): IOLIBS env var not set, using
> compile-time default instead
> 0.000689 main (2): invoked with following arguments:
> 0.000703 main (2): --debug
> 0.000716 main (2): --debug-logfile=my-logfile.txt
> 0.000729 main (2): --capture-image
> 0.000792 load_settings (2): Creating gphoto config directory
> ('/home/steve/.gphoto')
> 0.000924 load_settings (2): Loading settings from file
> '/home/steve/.gphoto/settings'.
> 0.001008 main (2): The user has not specified both a
> model and a port. Try to figure them out.
> 0.001028 gp_port_info_list_load (2): Using ltdl to load io-drivers from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'...
> 0.001225 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'.
> 0.001735 gp_port_library_list (2): found fstab fsname
> PARTUUID=341dd133-0af2-46b4-9036-30e048870f2d
> 0.001799 gp_port_library_list (2): found fstab fsname
> UUID=caa798cf-fca3-4674-a9bb-d44dc83da151
> 0.001829 gp_port_library_list (2): found fstab fsname
> /dev/mapper/cryptswap
> 0.002066 gp_port_library_list (2): found mtab fsname sysfs
> 0.002090 gp_port_library_list (2): found mtab fsname proc
> 0.002106 gp_port_library_list (2): found mtab fsname udev
> 0.002149 gp_port_library_list (2): found mtab fsname devpts
> 0.002164 gp_port_library_list (2): found mtab fsname tmpfs
> 0.002202 gp_port_library_list (2): found mtab fsname
> /dev/mapper/data-root
> 0.002255 gp_port_library_list (2): found mtab fsname securityfs
> 0.002271 gp_port_library_list (2): found mtab fsname tmpfs
> 0.002308 gp_port_library_list (2): found mtab fsname tmpfs
> 0.002555 gp_port_library_list (2): found mtab fsname cgroup2
> 0.002587 gp_port_library_list (2): found mtab fsname pstore
> 0.002628 gp_port_library_list (2): found mtab fsname efivarfs
> 0.002665 gp_port_library_list (2): found mtab fsname bpf
> 0.002822 gp_port_library_list (2): found mtab fsname systemd-1
> 0.002847 gp_port_library_list (2): found mtab fsname hugetlbfs
> 0.002889 gp_port_library_list (2): found mtab fsname mqueue
> 0.002904 gp_port_library_list (2): found mtab fsname debugfs
> 0.002937 gp_port_library_list (2): found mtab fsname tracefs
> 0.002969 gp_port_library_list (2): found mtab fsname fusectl
> 0.002985 gp_port_library_list (2): found mtab fsname configfs
> 0.003026 gp_port_library_list (2): found mtab fsname ramfs
> 0.003058 gp_port_library_list (2): found mtab fsname /dev/sda1
> 0.003088 gp_port_library_list (2): found mtab fsname binfmt_misc
> 0.003136 gp_port_library_list (2): found mtab fsname tmpfs
> 0.003176 gp_port_library_list (2): found mtab fsname gvfsd-fuse
> 0.003196 gp_port_library_list (2): found mtab fsname portal
> 0.003316 foreach_func (2): Loaded '' ('^disk:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'.
> 0.003335 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.003778 foreach_func (2): Loaded 'PTP/IP Connection'
> ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.003802 foreach_func (2): Loaded '' ('^ptpip:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.003817 foreach_func (2): Loaded 'IP Connection' ('ip:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.003832 foreach_func (2): Loaded '' ('^ip:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.003845 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004558 foreach_func (2): Loaded 'Serial Port 0'
> ('serial:/dev/ttyS0') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004595 foreach_func (2): Loaded 'Serial Port 1'
> ('serial:/dev/ttyS1') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004624 foreach_func (2): Loaded 'Serial Port 2'
> ('serial:/dev/ttyS2') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004650 foreach_func (2): Loaded 'Serial Port 3'
> ('serial:/dev/ttyS3') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004668 foreach_func (2): Loaded 'Serial Port 4'
> ('serial:/dev/ttyS4') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004682 foreach_func (2): Loaded 'Serial Port 5'
> ('serial:/dev/ttyS5') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004696 foreach_func (2): Loaded 'Serial Port 6'
> ('serial:/dev/ttyS6') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004710 foreach_func (2): Loaded 'Serial Port 7'
> ('serial:/dev/ttyS7') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004724 foreach_func (2): Loaded 'Serial Port 8'
> ('serial:/dev/ttyS8') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004738 foreach_func (2): Loaded 'Serial Port 9'
> ('serial:/dev/ttyS9') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004752 foreach_func (2): Loaded 'Serial Port 10'
> ('serial:/dev/ttyS10') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004766 foreach_func (2): Loaded 'Serial Port 11'
> ('serial:/dev/ttyS11') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004780 foreach_func (2): Loaded 'Serial Port 12'
> ('serial:/dev/ttyS12') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004812 foreach_func (2): Loaded 'Serial Port 13'
> ('serial:/dev/ttyS13') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004827 foreach_func (2): Loaded 'Serial Port 14'
> ('serial:/dev/ttyS14') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004841 foreach_func (2): Loaded 'Serial Port 15'
> ('serial:/dev/ttyS15') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004854 foreach_func (2): Loaded 'Serial Port 16'
> ('serial:/dev/ttyS16') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004868 foreach_func (2): Loaded 'Serial Port 17'
> ('serial:/dev/ttyS17') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004882 foreach_func (2): Loaded 'Serial Port 18'
> ('serial:/dev/ttyS18') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004896 foreach_func (2): Loaded 'Serial Port 19'
> ('serial:/dev/ttyS19') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004910 foreach_func (2): Loaded 'Serial Port 20'
> ('serial:/dev/ttyS20') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004924 foreach_func (2): Loaded 'Serial Port 21'
> ('serial:/dev/ttyS21') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004938 foreach_func (2): Loaded 'Serial Port 22'
> ('serial:/dev/ttyS22') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004952 foreach_func (2): Loaded 'Serial Port 23'
> ('serial:/dev/ttyS23') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004966 foreach_func (2): Loaded 'Serial Port 24'
> ('serial:/dev/ttyS24') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004979 foreach_func (2): Loaded 'Serial Port 25'
> ('serial:/dev/ttyS25') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.004993 foreach_func (2): Loaded 'Serial Port 26'
> ('serial:/dev/ttyS26') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005007 foreach_func (2): Loaded 'Serial Port 27'
> ('serial:/dev/ttyS27') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005021 foreach_func (2): Loaded 'Serial Port 28'
> ('serial:/dev/ttyS28') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005034 foreach_func (2): Loaded 'Serial Port 29'
> ('serial:/dev/ttyS29') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005048 foreach_func (2): Loaded 'Serial Port 30'
> ('serial:/dev/ttyS30') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005062 foreach_func (2): Loaded 'Serial Port 31'
> ('serial:/dev/ttyS31') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005076 foreach_func (2): Loaded 'Serial Port Device'
> ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005089 foreach_func (2): Loaded '' ('^serial:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005103 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023772 foreach_func (2): Loaded '' ('^usb:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023834 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,007') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023852 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,006') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023867 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,005') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023882 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,004') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023917 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,002') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.023933 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'.
> 0.024684 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'.
> 0.025362 gp_port_info_list_count (2): Counting entries (45 available)...
> 0.025402 gp_port_info_list_count (2): 40 regular entries available.
> 0.025477 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries
> from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27'...
> 0.025643 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ax203'.
> 0.025662 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/canon'.
> 0.025676 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/digigr8'.
> 0.025689 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/dimagev'.
> 0.025702 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/directory'.
> 0.025715 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/docupen'.
> 0.025728 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/jl2005a'.
> 0.025741 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/jl2005c'.
> 0.025754 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/kodak_dc240'.
> 0.025767 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/lumix'.
> 0.025780 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/mars'.
> 0.025794 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/pentax'.
> 0.025807 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ptp2'.
> 0.025820 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ricoh_g3'.
> 0.025833 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/sierra'.
> 0.025850 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/sonix'.
> 0.025872 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/sq905'.
> 0.025895 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/st2205'.
> 0.025917 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/topfield'.
> 0.025939 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/tp6801'.
> 0.025960 gp_abilities_list_load_dir (2): Found 20 camera drivers.
> 0.114656 gp_port_info_list_count (2): Counting entries (45 available)...
> 0.114694 gp_port_info_list_count (2): 40 regular entries available.
> 0.114704 gp_port_new (2): Creating new device...
> 0.114713 gp_port_info_list_get_info (2): Getting info of entry 0 (45
> available)...
> 0.114918 gp_port_set_settings (2): Setting settings...
> 0.114931 gp_port_info_list_get_info (2): Getting info of entry 1 (45
> available)...
> 0.115096 gp_port_set_settings (2): Setting settings...
> 0.115108 gp_port_info_list_get_info (2): Getting info of entry 2 (45
> available)...
> 0.115291 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.115301 gp_port_set_settings (2): Setting settings...
> 0.115309 gp_port_info_list_get_info (2): Getting info of entry 3 (45
> available)...
> 0.115494 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.115510 gp_port_set_settings (2): Setting settings...
> 0.115517 gp_port_info_list_get_info (2): Getting info of entry 4 (45
> available)...
> 0.115680 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.115690 gp_port_set_settings (2): Setting settings...
> 0.115698 gp_port_info_list_get_info (2): Getting info of entry 5 (45
> available)...
> 0.115868 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.115879 gp_port_set_settings (2): Setting settings...
> 0.115886 gp_port_info_list_get_info (2): Getting info of entry 6 (45
> available)...
> 0.116040 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.116050 gp_port_set_settings (2): Setting settings...
> 0.116057 gp_port_info_list_get_info (2): Getting info of entry 7 (45
> available)...
> 0.116212 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.116222 gp_port_set_settings (2): Setting settings...
> 0.116229 gp_port_info_list_get_info (2): Getting info of entry 8 (45
> available)...
> 0.116393 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.116408 gp_port_set_settings (2): Setting settings...
> 0.116416 gp_port_info_list_get_info (2): Getting info of entry 9 (45
> available)...
> 0.116570 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.116580 gp_port_set_settings (2): Setting settings...
> 0.116590 gp_port_info_list_get_info (2): Getting info of entry 10 (45
> available)...
> 0.116755 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.116766 gp_port_set_settings (2): Setting settings...
> 0.116773 gp_port_info_list_get_info (2): Getting info of entry 11 (45
> available)...
> 0.116925 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.116935 gp_port_set_settings (2): Setting settings...
> 0.116942 gp_port_info_list_get_info (2): Getting info of entry 12 (45
> available)...
> 0.117095 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.117105 gp_port_set_settings (2): Setting settings...
> 0.117113 gp_port_info_list_get_info (2): Getting info of entry 13 (45
> available)...
> 0.117265 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.117275 gp_port_set_settings (2): Setting settings...
> 0.117282 gp_port_info_list_get_info (2): Getting info of entry 14 (45
> available)...
> 0.117446 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.117461 gp_port_set_settings (2): Setting settings...
> 0.117469 gp_port_info_list_get_info (2): Getting info of entry 15 (45
> available)...
> 0.117622 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.117632 gp_port_set_settings (2): Setting settings...
> 0.117640 gp_port_info_list_get_info (2): Getting info of entry 16 (45
> available)...
> 0.117790 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.117800 gp_port_set_settings (2): Setting settings...
> 0.117808 gp_port_info_list_get_info (2): Getting info of entry 17 (45
> available)...
> 0.117989 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.118000 gp_port_set_settings (2): Setting settings...
> 0.118008 gp_port_info_list_get_info (2): Getting info of entry 18 (45
> available)...
> 0.118160 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.118170 gp_port_set_settings (2): Setting settings...
> 0.118177 gp_port_info_list_get_info (2): Getting info of entry 19 (45
> available)...
> 0.118333 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.118515 gp_port_set_settings (2): Setting settings...
> 0.118524 gp_port_info_list_get_info (2): Getting info of entry 20 (45
> available)...
> 0.118734 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.118747 gp_port_set_settings (2): Setting settings...
> 0.118755 gp_port_info_list_get_info (2): Getting info of entry 21 (45
> available)...
> 0.118928 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.118939 gp_port_set_settings (2): Setting settings...
> 0.118946 gp_port_info_list_get_info (2): Getting info of entry 22 (45
> available)...
> 0.119106 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.119117 gp_port_set_settings (2): Setting settings...
> 0.119141 gp_port_info_list_get_info (2): Getting info of entry 23 (45
> available)...
> 0.119422 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.119470 gp_port_set_settings (2): Setting settings...
> 0.119484 gp_port_info_list_get_info (2): Getting info of entry 24 (45
> available)...
> 0.119796 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.119815 gp_port_set_settings (2): Setting settings...
> 0.119827 gp_port_info_list_get_info (2): Getting info of entry 25 (45
> available)...
> 0.120100 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.120111 gp_port_set_settings (2): Setting settings...
> 0.120119 gp_port_info_list_get_info (2): Getting info of entry 26 (45
> available)...
> 0.120295 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.120305 gp_port_set_settings (2): Setting settings...
> 0.120312 gp_port_info_list_get_info (2): Getting info of entry 27 (45
> available)...
> 0.120480 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.120495 gp_port_set_settings (2): Setting settings...
> 0.120503 gp_port_info_list_get_info (2): Getting info of entry 28 (45
> available)...
> 0.120662 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.120672 gp_port_set_settings (2): Setting settings...
> 0.120679 gp_port_info_list_get_info (2): Getting info of entry 29 (45
> available)...
> 0.120821 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.120831 gp_port_set_settings (2): Setting settings...
> 0.120837 gp_port_info_list_get_info (2): Getting info of entry 30 (45
> available)...
> 0.120980 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.120989 gp_port_set_settings (2): Setting settings...
> 0.120996 gp_port_info_list_get_info (2): Getting info of entry 31 (45
> available)...
> 0.121138 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.121148 gp_port_set_settings (2): Setting settings...
> 0.121154 gp_port_info_list_get_info (2): Getting info of entry 32 (45
> available)...
> 0.121297 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.121306 gp_port_set_settings (2): Setting settings...
> 0.121313 gp_port_info_list_get_info (2): Getting info of entry 33 (45
> available)...
> 0.121466 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.121480 gp_port_set_settings (2): Setting settings...
> 0.121487 gp_port_info_list_get_info (2): Getting info of entry 34 (45
> available)...
> 0.121629 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.121639 gp_port_set_settings (2): Setting settings...
> 0.121646 gp_port_info_list_get_info (2): Getting info of entry 35 (45
> available)...
> 0.129214 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.129241 gp_port_set_settings (2): Setting settings...
> 0.129261 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,007, (new int=0, conf=-1, alt=-1) port usb:001,007
> 0.129268 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.129275 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.129856 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.130306 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.130466 gp_port_info_list_get_info (2): Getting info of entry 36 (45
> available)...
> 0.137562 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.137582 gp_port_set_settings (2): Setting settings...
> 0.137598 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,006, (new int=0, conf=-1, alt=-1) port usb:001,006
> 0.137605 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.137611 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.138189 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.138616 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.138656 gp_port_info_list_get_info (2): Getting info of entry 37 (45
> available)...
> 0.145593 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.145618 gp_port_set_settings (2): Setting settings...
> 0.145636 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,005, (new int=0, conf=-1, alt=-1) port usb:001,005
> 0.145643 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.145649 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.146215 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.146637 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.146685 gp_port_info_list_get_info (2): Getting info of entry 38 (45
> available)...
> 0.153700 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.153728 gp_port_set_settings (2): Setting settings...
> 0.153747 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,004, (new int=0, conf=-1, alt=-1) port usb:001,004
> 0.153753 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.153761 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.154319 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.154733 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.154780 gp_port_info_list_get_info (2): Getting info of entry 39 (45
> available)...
> 0.162052 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.162076 gp_port_set_settings (2): Setting settings...
> 0.162092 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,002, (new int=0, conf=-1, alt=-1) port usb:001,002
> 0.162098 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.162105 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.162160 gp_libusb1_find_device_lib (2): Looking for USB device (vendor
> 0x5ac, product 0x12a8)... found.
> 0.162213 gp_libusb1_find_device_lib (2): Detected defaults: config 1,
> interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
> 0.162220 gp_abilities_list_detect_usb(2): Found 'Apple iPhone 5 (PTP mode)'
> (0x5ac,0x12a8)
> 0.162254 gp_port_free (2): Freeing port...
> 0.162261 gp_port_close (2): Closing port...
> 0.162515 gp_camera_set_abilities (2): Setting abilities ('Apple iPhone 5
> (PTP mode)')...
> 0.162531 gp_setting_set (2): Setting key 'model' to value 'Apple
> iPhone 5 (PTP mode)' (gphoto2)
> 0.162539 save_settings (2): Saving 2 setting(s) to file
> "/home/steve/.gphoto/settings"
> 0.162684 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,002' (45
> entries available)...
> 0.162694 gp_port_info_list_get_info (2): Getting info of entry 39 (45
> available)...
> 0.162701 gp_camera_set_port_info (2): Setting port info for port
> 'Universal Serial Bus' at 'usb:001,002'...
> 0.168914 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.168933 gp_port_set_settings (2): Setting settings...
> 0.168948 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,002, (new int=0, conf=-1, alt=-1) port usb:001,002
> 0.168954 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.168961 gp_setting_set (2): Setting key 'port' to value
> 'usb:001,002' (gphoto2)
> 0.168968 save_settings (2): Saving 2 setting(s) to file
> "/home/steve/.gphoto/settings"
> 0.169136 gp_camera_init (2): Initializing camera...
> 0.169165 gp_libusb1_find_device_lib (2): Looking for USB device (vendor
> 0x5ac, product 0x12a8)... found.
> 0.169222 gp_libusb1_find_device_lib (2): Detected defaults: config 1,
> interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
> 0.169230 gp_camera_init (2): Loading
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ptp2'...
> 0.170663 gp_port_open (2): Opening USB port...
> 0.170683 gp_libusb1_open (2): ()
> 0.170724 gp_libusb1_open (2): claiming interface 0
> 0.170892 camera_init (2): maxpacketsize 512
> 0.170908 gp_port_set_timeout (2): Setting port timeout to 8000
> milliseconds.
> 0.170914 ptp (2): PTP: Opening session
> 0.170933 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open
> session) (0x1) request...
> 0.170940 gp_port_write (3): Writing 16 = 0x10 bytes to port...
> 0.171012 gp_port_write (3): Wrote 16 = 0x10 bytes to port:
> (hexdump of 16 bytes)
> 0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................
>
> 0.171023 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open
> session) response...
> 0.171037 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.182917 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-00 00 00 00 ....... ....
>
> 0.182951 gp_port_set_timeout (2): Setting port timeout to 20000
> milliseconds.
> 0.182963 ptp_usb_sendreq (2): Sending PTP_OC 0x1001 (Get device
> info) request...
> 0.182970 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.183039 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 01 10-01 00 00 00 ............
>
> 0.183051 ptp_usb_getdata (2): Reading PTP_OC 0x1001 (Get device
> info) data...
> 0.183058 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.187397 gp_port_read (3): Read 295 = 0x127 out of 1024
> bytes from port: (hexdump of 295 bytes)
> 0000 27 01 00 00 02 00 01 10-01 00 00 00 6e 00 06 00 '...........n...
> 0010 00 00 f0 05 0e 49 00 43-00 50 00 45 00 5e 00 30 .....I.C.P.E.^.0
> 0020 00 26 00 43 00 50 00 4c-00 53 00 5e 00 30 00 00 .&.C.P.L.S.^.0..
> 0030 00 00 00 21 00 00 00 01-10 02 10 03 10 04 10 05 ...!............
> 0040 10 06 10 07 10 08 10 09-10 0a 10 0b 10 14 10 15 ................
> 0050 10 1b 10 23 10 01 90 02-90 03 90 04 90 05 90 06 ...#............
> 0060 90 07 90 08 90 09 90 0b-90 0c 90 0e 90 01 97 02 ................
> 0070 97 01 98 02 98 03 98 05-98 0b 00 00 00 01 40 02 ..............@.
> 0080 40 03 40 04 40 05 40 06-40 04 c7 05 c7 06 c7 07 @.@.@.@.@.......
> 0090 c7 08 c7 02 00 00 00 02-d3 07 da 04 00 00 00 01 ................
> 00a0 30 01 38 0b 38 0d 38 10-00 00 00 00 30 01 30 02 0.8.8.8.....0.0.
> 00b0 30 07 30 08 30 09 30 0a-30 0b 30 0c 30 0d 30 01 0.0.0.0.0.0.0.0.
> 00c0 38 0b 38 0d 38 01 b4 02-b4 21 b4 0b 41 00 70 00 8.8.8....!..A.p.
> 00d0 70 00 6c 00 65 00 20 00-49 00 6e 00 63 00 2e 00 p.l.e. .I.n.c...
> 00e0 00 00 0d 41 00 70 00 70-00 6c 00 65 00 20 00 69 ...A.p.p.l.e. .i
> 00f0 00 50 00 68 00 6f 00 6e-00 65 00 00 00 07 31 00 .P.h.o.n.e....1.
> 0100 36 00 2e 00 37 00 2e 00-38 00 00 00 0d 46 00 44 6...7...8....F.D
> 0110 00 34 00 59 00 37 00 34-00 31 00 36 00 4a 00 43 .4.Y.7.4.1.6.J.C
> 0120 00 4d 00 34 00 00 00 - .M.4...
>
> 0.187448 ptp_usb_getresp (2): Reading PTP_OC 0x1001 (Get device
> info) response...
> 0.187457 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.187755 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-01 00 00 00 ....... ....
>
> 0.187794 print_debug_deviceinfo (2): Device info:
> 0.187802 print_debug_deviceinfo (2): Manufacturer: Apple Inc.
> 0.187808 print_debug_deviceinfo (2): Model: Apple iPhone
> 0.187814 print_debug_deviceinfo (2): device version: 16.7.8
> 0.187833 print_debug_deviceinfo (2): serial number: 'FD4Y7416JCM4'
> 0.187840 print_debug_deviceinfo (2): Vendor extension ID: 0x00000006
> 0.187846 print_debug_deviceinfo (2): Vendor extension version: 1520
> 0.187851 print_debug_deviceinfo (2): Vendor extension description:
> ICPE^0&CPLS^0
> 0.187857 print_debug_deviceinfo (2): Functional Mode: 0x0000
> 0.187863 print_debug_deviceinfo (2): PTP Standard Version: 110
> 0.187869 print_debug_deviceinfo (2): Supported operations:
> 0.187877 print_debug_deviceinfo (2): 0x1001 (Get device info)
> 0.187884 print_debug_deviceinfo (2): 0x1002 (Open session)
> 0.187890 print_debug_deviceinfo (2): 0x1003 (Close session)
> 0.187896 print_debug_deviceinfo (2): 0x1004 (Get storage IDs)
> 0.187902 print_debug_deviceinfo (2): 0x1005 (Get storage info)
> 0.187908 print_debug_deviceinfo (2): 0x1006 (Get number of objects)
> 0.187914 print_debug_deviceinfo (2): 0x1007 (Get object handles)
> 0.187920 print_debug_deviceinfo (2): 0x1008 (Get object info)
> 0.187926 print_debug_deviceinfo (2): 0x1009 (Get object)
> 0.187933 print_debug_deviceinfo (2): 0x100a (Get thumbnail)
> 0.187939 print_debug_deviceinfo (2): 0x100b (Delete object)
> 0.187945 print_debug_deviceinfo (2): 0x1014 (Get device property
> description)
> 0.187951 print_debug_deviceinfo (2): 0x1015 (Get device property value)
> 0.187957 print_debug_deviceinfo (2): 0x101b (Get partial object)
> 0.187964 print_debug_deviceinfo (2): 0x1023 (Get Filesystem Manifest)
> 0.187970 print_debug_deviceinfo (2): 0x9001 (Unknown PTP_OC)
> 0.187976 print_debug_deviceinfo (2): 0x9002 (Unknown PTP_OC)
> 0.187982 print_debug_deviceinfo (2): 0x9003 (Unknown PTP_OC)
> 0.187989 print_debug_deviceinfo (2): 0x9004 (Unknown PTP_OC)
> 0.187995 print_debug_deviceinfo (2): 0x9005 (Unknown PTP_OC)
> 0.188001 print_debug_deviceinfo (2): 0x9006 (Unknown PTP_OC)
> 0.188007 print_debug_deviceinfo (2): 0x9007 (Unknown PTP_OC)
> 0.188013 print_debug_deviceinfo (2): 0x9008 (Unknown PTP_OC)
> 0.188019 print_debug_deviceinfo (2): 0x9009 (Unknown PTP_OC)
> 0.188025 print_debug_deviceinfo (2): 0x900b (Unknown PTP_OC)
> 0.188031 print_debug_deviceinfo (2): 0x900c (Unknown PTP_OC)
> 0.188037 print_debug_deviceinfo (2): 0x900e (Unknown PTP_OC)
> 0.188044 print_debug_deviceinfo (2): 0x9701 (Unknown PTP_OC)
> 0.188050 print_debug_deviceinfo (2): 0x9702 (Unknown PTP_OC)
> 0.188056 print_debug_deviceinfo (2): 0x9801 (Get object properties
> supported)
> 0.188062 print_debug_deviceinfo (2): 0x9802 (Get object property
> description)
> 0.188068 print_debug_deviceinfo (2): 0x9803 (Get object property value)
> 0.188074 print_debug_deviceinfo (2): 0x9805 (Get object property list)
> 0.188080 print_debug_deviceinfo (2): Events Supported:
> 0.188086 print_debug_deviceinfo (2): 0x4001 (CancelTransaction)
> 0.188092 print_debug_deviceinfo (2): 0x4002 (ObjectAdded)
> 0.188098 print_debug_deviceinfo (2): 0x4003 (ObjectRemoved)
> 0.188104 print_debug_deviceinfo (2): 0x4004 (StoreAdded)
> 0.188110 print_debug_deviceinfo (2): 0x4005 (StoreRemoved)
> 0.188116 print_debug_deviceinfo (2): 0x4006 (DevicePropChanged)
> 0.188122 print_debug_deviceinfo (2): 0xc704 (Unknown Event)
> 0.188128 print_debug_deviceinfo (2): 0xc705 (Unknown Event)
> 0.188134 print_debug_deviceinfo (2): 0xc706 (Unknown Event)
> 0.188140 print_debug_deviceinfo (2): 0xc707 (Unknown Event)
> 0.188146 print_debug_deviceinfo (2): 0xc708 (Unknown Event)
> 0.188151 print_debug_deviceinfo (2): Device Properties Supported:
> 0.188160 print_debug_deviceinfo (2): 0xd302 (Unknown DPC code)
> 0.188167 print_debug_deviceinfo (2): 0xda07 (Unknown DPC code)
> 0.188175 print_debug_deviceinfo (2): Device info:
> 0.188180 print_debug_deviceinfo (2): Manufacturer: Apple Inc.
> 0.188186 print_debug_deviceinfo (2): Model: Apple iPhone
> 0.188197 print_debug_deviceinfo (2): device version: 16.7.8
> 0.188202 print_debug_deviceinfo (2): serial number: 'FD4Y7416JCM4'
> 0.188208 print_debug_deviceinfo (2): Vendor extension ID: 0x00000006
> 0.188214 print_debug_deviceinfo (2): Vendor extension version: 1520
> 0.188220 print_debug_deviceinfo (2): Vendor extension description:
> ICPE^0&CPLS^0
> 0.188226 print_debug_deviceinfo (2): Functional Mode: 0x0000
> 0.188232 print_debug_deviceinfo (2): PTP Standard Version: 110
> 0.188237 print_debug_deviceinfo (2): Supported operations:
> 0.188243 print_debug_deviceinfo (2): 0x1001 (Get device info)
> 0.188250 print_debug_deviceinfo (2): 0x1002 (Open session)
> 0.188256 print_debug_deviceinfo (2): 0x1003 (Close session)
> 0.188262 print_debug_deviceinfo (2): 0x1004 (Get storage IDs)
> 0.188268 print_debug_deviceinfo (2): 0x1005 (Get storage info)
> 0.188274 print_debug_deviceinfo (2): 0x1006 (Get number of objects)
> 0.188280 print_debug_deviceinfo (2): 0x1007 (Get object handles)
> 0.188286 print_debug_deviceinfo (2): 0x1008 (Get object info)
> 0.188293 print_debug_deviceinfo (2): 0x1009 (Get object)
> 0.188299 print_debug_deviceinfo (2): 0x100a (Get thumbnail)
> 0.188305 print_debug_deviceinfo (2): 0x100b (Delete object)
> 0.188311 print_debug_deviceinfo (2): 0x1014 (Get device property
> description)
> 0.188317 print_debug_deviceinfo (2): 0x1015 (Get device property value)
> 0.188323 print_debug_deviceinfo (2): 0x101b (Get partial object)
> 0.188329 print_debug_deviceinfo (2): 0x1023 (Get Filesystem Manifest)
> 0.188347 print_debug_deviceinfo (2): 0x9001 (Unknown PTP_OC)
> 0.188360 print_debug_deviceinfo (2): 0x9002 (Unknown PTP_OC)
> 0.188367 print_debug_deviceinfo (2): 0x9003 (Unknown PTP_OC)
> 0.188373 print_debug_deviceinfo (2): 0x9004 (Unknown PTP_OC)
> 0.188379 print_debug_deviceinfo (2): 0x9005 (Unknown PTP_OC)
> 0.188385 print_debug_deviceinfo (2): 0x9006 (Unknown PTP_OC)
> 0.188391 print_debug_deviceinfo (2): 0x9007 (Unknown PTP_OC)
> 0.188397 print_debug_deviceinfo (2): 0x9008 (Unknown PTP_OC)
> 0.188404 print_debug_deviceinfo (2): 0x9009 (Unknown PTP_OC)
> 0.188410 print_debug_deviceinfo (2): 0x900b (Unknown PTP_OC)
> 0.188416 print_debug_deviceinfo (2): 0x900c (Unknown PTP_OC)
> 0.188422 print_debug_deviceinfo (2): 0x900e (Unknown PTP_OC)
> 0.188428 print_debug_deviceinfo (2): 0x9701 (Unknown PTP_OC)
> 0.188434 print_debug_deviceinfo (2): 0x9702 (Unknown PTP_OC)
> 0.188440 print_debug_deviceinfo (2): 0x9801 (Get object properties
> supported)
> 0.188447 print_debug_deviceinfo (2): 0x9802 (Get object property
> description)
> 0.188453 print_debug_deviceinfo (2): 0x9803 (Get object property value)
> 0.188459 print_debug_deviceinfo (2): 0x9805 (Get object property list)
> 0.188464 print_debug_deviceinfo (2): Events Supported:
> 0.188471 print_debug_deviceinfo (2): 0x4001 (CancelTransaction)
> 0.188477 print_debug_deviceinfo (2): 0x4002 (ObjectAdded)
> 0.188483 print_debug_deviceinfo (2): 0x4003 (ObjectRemoved)
> 0.188489 print_debug_deviceinfo (2): 0x4004 (StoreAdded)
> 0.188494 print_debug_deviceinfo (2): 0x4005 (StoreRemoved)
> 0.188500 print_debug_deviceinfo (2): 0x4006 (DevicePropChanged)
> 0.188506 print_debug_deviceinfo (2): 0xc704 (Unknown Event)
> 0.188512 print_debug_deviceinfo (2): 0xc705 (Unknown Event)
> 0.188518 print_debug_deviceinfo (2): 0xc706 (Unknown Event)
> 0.188524 print_debug_deviceinfo (2): 0xc707 (Unknown Event)
> 0.188530 print_debug_deviceinfo (2): 0xc708 (Unknown Event)
> 0.188536 print_debug_deviceinfo (2): Device Properties Supported:
> 0.188543 print_debug_deviceinfo (2): 0xd302 (Unknown DPC code)
> 0.188550 print_debug_deviceinfo (2): 0xda07 (Unknown DPC code)
> 0.188558 ptp_usb_sendreq (2): Sending PTP_OC 0x1004 (Get storage
> IDs) request...
> 0.188566 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.188732 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 04 10-02 00 00 00 ............
>
> 0.188751 ptp_usb_getdata (2): Reading PTP_OC 0x1004 (Get storage
> IDs) data...
> 0.188759 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.190071 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 04 10-02 00 00 00 01 00 00 00 ................
> 0010 01 00 01 00 - ....
>
> 0.190094 ptp_usb_getresp (2): Reading PTP_OC 0x1004 (Get storage
> IDs) response...
> 0.190102 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.190518 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-02 00 00 00 ....... ....
>
> 0.190541 gp_port_get_timeout (2): Current port timeout is 20000
> milliseconds.
> 0.190549 gp_port_set_timeout (2): Setting port timeout to 3000
> milliseconds.
> 0.190555 gp_port_set_timeout (2): Setting port timeout to 20000
> milliseconds.
> 0.190562 ptp (2): (storage=0xffffffff,
> handle=0xffffffff)
> 0.190569 ptp (2): Listing ...
> 0.190587 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0xffffffff,0x0,0xffffffff) request...
> 0.190595 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.190665 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-03 00 00 00 ff ff ff ff ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.190677 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.190684 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.191951 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-03 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.191976 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.191984 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.192396 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-03 00 00 00 ....... ....
>
> 0.192419 ptp (2): adding new objectid 0x00000001
> (nrofobs=0,j=0)
> 0.192428 ptp (2): (storage=0x00010001,
> handle=0xffffffff)
> 0.192434 ptp (2): Listing ...
> 0.192444 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0x10001,0x0,0xffffffff) request...
> 0.192451 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.192521 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-04 00 00 00 01 00 01 00 ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.192532 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.192539 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.193988 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-04 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.194012 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.194021 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.194392 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-04 00 00 00 ....... ....
>
> 0.194415 ptp (2): adding old objectid 0x00000001
> (nrofobs=1,j=0)
> 0.194438 gp_context_error (0): Sorry, your camera does not support
> generic capture
> 0.194463 gp_camera_capture [gphoto2-camera.c:1339](0):
> 'camera->functions->capture (camera, type, path, context)' failed: -6
> 0.195148 gp_camera_free (2): Freeing camera...
> 0.195158 gp_camera_exit (2): Exiting camera ('Apple iPhone 5
> (PTP mode)')...
> 0.195166 gp_port_get_timeout (2): Current port timeout is 20000
> milliseconds.
> 0.195172 gp_port_set_timeout (2): Setting port timeout to 150
> milliseconds.
> 0.195179 gp_port_check_int (3): Reading 24 = 0x18 bytes from
> interrupt endpoint...
> 0.206443 _cb_irq (2): 0x5869eb9fb550 with status 0
> 0.206480 _cb_irq (3): interrupt (hexdump of 16 bytes)
> 0000 10 00 00 00 04 00 04 40-ff ff ff ff 01 00 01 00 .......@........
>
> 0.206492 _cb_irq (2): Requeuing completed transfer
> 0x5869eb9fb550
> 0.206523 gp_port_check_int (3): Read 16 = 0x10 out of 24 bytes
> from interrupt endpoint: (hexdump of 16 bytes)
> 0000 10 00 00 00 04 00 04 40-ff ff ff ff 01 00 01 00 .......@........
>
> 0.206532 gp_port_set_timeout (2): Setting port timeout to 20000
> milliseconds.
> 0.206542 ptp (2): event: nparams=0x1, code=0x4004,
> trans_id=0xFFFFFFFF, p1=0x10001, p2=0x0, p3=0x0
> 0.206553 ptp_usb_sendreq (2): Sending PTP_OC 0x1004 (Get storage
> IDs) request...
> 0.206560 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.206630 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 04 10-05 00 00 00 ............
>
> 0.206642 ptp_usb_getdata (2): Reading PTP_OC 0x1004 (Get storage
> IDs) data...
> 0.206650 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.207539 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 04 10-05 00 00 00 01 00 00 00 ................
> 0010 01 00 01 00 - ....
>
> 0.207563 ptp_usb_getresp (2): Reading PTP_OC 0x1004 (Get storage
> IDs) response...
> 0.207571 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.207628 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-05 00 00 00 ....... ....
>
> 0.207640 ptp (2): (storage=0xffffffff,
> handle=0xffffffff)
> 0.207646 ptp (2): Listing ...
> 0.207655 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0xffffffff,0x0,0xffffffff) request...
> 0.207661 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.207722 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-06 00 00 00 ff ff ff ff ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.207732 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.207738 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.208539 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-06 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.208563 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.208571 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.208637 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-06 00 00 00 ....... ....
>
> 0.208650 ptp (2): adding new objectid 0x00000001
> (nrofobs=0,j=0)
> 0.208658 ptp (2): (storage=0x00010001,
> handle=0xffffffff)
> 0.208664 ptp (2): Listing ...
> 0.208686 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0x10001,0x0,0xffffffff) request...
> 0.208693 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.208758 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-07 00 00 00 01 00 01 00 ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.208769 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.208776 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.209517 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-07 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.209542 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.209550 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.209625 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-07 00 00 00 ....... ....
>
> 0.209638 ptp (2): adding old objectid 0x00000001
> (nrofobs=1,j=0)
> 0.209647 camera_exit (2): missed ptp event 0x4004
> (param1=10001)
> 0.209655 ptp_usb_sendreq (2): Sending PTP_OC 0x1003 (Close
> session) request...
> 0.209662 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.209720 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 03 10-08 00 00 00 ............
>
> 0.209731 ptp_usb_getresp (2): Reading PTP_OC 0x1003 (Close
> session) response...
> 0.209738 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.210898 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-08 00 00 00 ....... ....
>
> 0.210924 gp_port_close (2): Closing port...
> 0.212045 _close_async_interrupts (2): canceling transfer 0:0x5869eb9fb550
> (status 0)
> 0.212117 _close_async_interrupts (2): canceling transfer 1:0x5869eba00dc0
> (status 0)
> 0.212239 _close_async_interrupts (2): canceling transfer 2:0x5869eb9f70e0
> (status 0)
> 0.212324 _close_async_interrupts (2): canceling transfer 3:0x5869eba2eff0
> (status 0)
> 0.212488 _close_async_interrupts (2): canceling transfer 4:0x5869eb9e9fb0
> (status 0)
> 0.212631 _close_async_interrupts (2): canceling transfer 5:0x5869eba1b0d0
> (status 0)
> 0.212769 _close_async_interrupts (2): canceling transfer 6:0x5869eba05610
> (status 0)
> 0.212860 _close_async_interrupts (2): canceling transfer 7:0x5869eba06470
> (status 0)
> 0.212943 _close_async_interrupts (2): canceling transfer 8:0x5869eba03300
> (status 0)
> 0.213024 _close_async_interrupts (2): canceling transfer 9:0x5869eb9fa300
> (status 0)
> 0.213108 _cb_irq (2): 0x5869eb9fb550 with status 3
> 0.213118 _cb_irq (2): Transfer 0x5869eb9fb550 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213130 _cb_irq (2): 0x5869eba00dc0 with status 3
> 0.213142 _cb_irq (2): Transfer 0x5869eba00dc0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213151 _cb_irq (2): 0x5869eb9f70e0 with status 3
> 0.213157 _cb_irq (2): Transfer 0x5869eb9f70e0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213165 _cb_irq (2): 0x5869eba2eff0 with status 3
> 0.213171 _cb_irq (2): Transfer 0x5869eba2eff0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213180 _cb_irq (2): 0x5869eb9e9fb0 with status 3
> 0.213186 _cb_irq (2): Transfer 0x5869eb9e9fb0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213194 _cb_irq (2): 0x5869eba1b0d0 with status 3
> 0.213200 _cb_irq (2): Transfer 0x5869eba1b0d0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213219 _cb_irq (2): 0x5869eba05610 with status 3
> 0.213225 _cb_irq (2): Transfer 0x5869eba05610 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213233 _cb_irq (2): 0x5869eba06470 with status 3
> 0.213240 _cb_irq (2): Transfer 0x5869eba06470 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213248 _cb_irq (2): 0x5869eba03300 with status 3
> 0.213254 _cb_irq (2): Transfer 0x5869eba03300 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213262 _cb_irq (2): 0x5869eb9fa300 with status 3
> 0.213268 _cb_irq (2): Transfer 0x5869eb9fa300 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.213604 gp_filesystem_reset (2): resetting filesystem
> 0.213620 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
> 0.213627 gp_filesystem_lru_clear (2): fscache LRU list already empty
> 0.213633 delete_all_folders (2): Internally deleting all folders
> from '/'...
> 0.213639 lookup_folder (2): Lookup folder '/'...
> 0.213646 lookup_folder (2): Found! / is 0x5869eb9df890
> 0.213652 recurse_delete_folder (2): Recurse delete folder
> 0x5869eb9df890//
> 0.213658 delete_all_files (2): Delete all files in folder
> 0x5869eb9df890//
> 0.213664 gp_port_free (2): Freeing port...
> 0.213671 gp_port_close (2): Closing port...
> 0.213909 gp_filesystem_reset (2): resetting filesystem
> 0.213920 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
> 0.213926 gp_filesystem_lru_clear (2): fscache LRU list already empty
> 0.213932 delete_all_folders (2): Internally deleting all folders
> from '/'...
> 0.213938 lookup_folder (2): Lookup folder '/'...
> 0.213944 lookup_folder (2): Found! / is 0x5869eb9df890
> 0.213950 recurse_delete_folder (2): Recurse delete folder
> 0x5869eb9df890//
> 0.213956 delete_all_files (2): Delete all files in folder
> 0x5869eb9df890//
> 0.000020 main (2): ALWAYS INCLUDE THE FOLLOWING LINES
> WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
> 0.000151 main (2): gphoto2 2.5.27
> 0.000180 main (2): gphoto2 has been compiled with the
> following options:
> 0.000201 main (2): + gcc (C compiler used)
> 0.000222 main (2): + popt (mandatory, for handling
> command-line parameters)
> 0.000242 main (2): + exif (for displaying EXIF
> information)
> 0.000264 main (2): + cdk (for accessing configuration
> options)
> 0.000284 main (2): + aa (for displaying live previews)
> 0.000304 main (2): + jpeg (for displaying live
> previews in JPEG format)
> 0.000323 main (2): + readline (for easy navigation in
> the shell)
> 0.000344 main (2): libgphoto2 2.5.27
> 0.000364 main (2): libgphoto2 has been compiled with
> the following options:
> 0.000387 main (2): + standard camlib set (ax203 canon
> digigr8 dimagev directory docupen jl2005a jl2005c kodak_dc240 lumix mars
> pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801)
> 0.000407 main (2): + gcc (C compiler used)
> 0.000426 main (2): + ltdl (for portable loading of
> camlibs)
> 0.000445 main (2): + EXIF (for special handling of
> EXIF files)
> 0.000475 main (2): libgphoto2_port 0.12.0
> 0.000496 main (2): libgphoto2_port has been compiled
> with the following options:
> 0.000523 main (2): + iolibs: disk ptpip serial usb1
> usbdiskdirect usbscsi
> 0.000555 main (2): + gcc (C compiler used)
> 0.000575 main (2): + ltdl (for portable loading of
> iolibs)
> 0.000594 main (2): + EXIF (for vusb)
> 0.000640 main (2): + USB (libusb1, for USB cameras)
> 0.000656 main (2): + serial (for serial cameras)
> 0.000672 main (2): + no resmgr (serial port access
> and locking)
> 0.000688 main (2): + no ttylock (serial port locking)
> 0.000703 main (2): + no lockdev (serial port locking)
> 0.000721 main (2): CAMLIBS env var not set, using
> compile-time default instead
> 0.000737 main (2): IOLIBS env var not set, using
> compile-time default instead
> 0.000908 main (2): invoked with following arguments:
> 0.000940 main (2): --debug
> 0.000957 main (2): --debug-logfile=my-logfile.txt
> 0.000973 main (2): --capture-image
> 0.001037 load_settings (2): Creating gphoto config directory
> ('/home/steve/.gphoto')
> 0.001149 load_settings (2): Loading settings from file
> '/home/steve/.gphoto/settings'.
> 0.001238 main (2): The user has not specified both a
> model and a port. Try to figure them out.
> 0.001264 gp_port_info_list_load (2): Using ltdl to load io-drivers from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'...
> 0.001436 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'.
> 0.001996 gp_port_library_list (2): found fstab fsname
> PARTUUID=341dd133-0af2-46b4-9036-30e048870f2d
> 0.002074 gp_port_library_list (2): found fstab fsname
> UUID=caa798cf-fca3-4674-a9bb-d44dc83da151
> 0.002106 gp_port_library_list (2): found fstab fsname
> /dev/mapper/cryptswap
> 0.002307 gp_port_library_list (2): found mtab fsname sysfs
> 0.002337 gp_port_library_list (2): found mtab fsname proc
> 0.002355 gp_port_library_list (2): found mtab fsname udev
> 0.002409 gp_port_library_list (2): found mtab fsname devpts
> 0.002429 gp_port_library_list (2): found mtab fsname tmpfs
> 0.002468 gp_port_library_list (2): found mtab fsname
> /dev/mapper/data-root
> 0.002498 gp_port_library_list (2): found mtab fsname securityfs
> 0.002517 gp_port_library_list (2): found mtab fsname tmpfs
> 0.002558 gp_port_library_list (2): found mtab fsname tmpfs
> 0.002598 gp_port_library_list (2): found mtab fsname cgroup2
> 0.002617 gp_port_library_list (2): found mtab fsname pstore
> 0.002659 gp_port_library_list (2): found mtab fsname efivarfs
> 0.002711 gp_port_library_list (2): found mtab fsname bpf
> 0.002861 gp_port_library_list (2): found mtab fsname systemd-1
> 0.002925 gp_port_library_list (2): found mtab fsname hugetlbfs
> 0.002971 gp_port_library_list (2): found mtab fsname mqueue
> 0.002991 gp_port_library_list (2): found mtab fsname debugfs
> 0.003028 gp_port_library_list (2): found mtab fsname tracefs
> 0.003064 gp_port_library_list (2): found mtab fsname fusectl
> 0.003083 gp_port_library_list (2): found mtab fsname configfs
> 0.003130 gp_port_library_list (2): found mtab fsname ramfs
> 0.003167 gp_port_library_list (2): found mtab fsname /dev/sda1
> 0.003200 gp_port_library_list (2): found mtab fsname binfmt_misc
> 0.003255 gp_port_library_list (2): found mtab fsname tmpfs
> 0.003302 gp_port_library_list (2): found mtab fsname gvfsd-fuse
> 0.003328 gp_port_library_list (2): found mtab fsname portal
> 0.003464 foreach_func (2): Loaded '' ('^disk:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'.
> 0.003492 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.004078 foreach_func (2): Loaded 'PTP/IP Connection'
> ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.004124 foreach_func (2): Loaded '' ('^ptpip:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.004143 foreach_func (2): Loaded 'IP Connection' ('ip:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.004185 foreach_func (2): Loaded '' ('^ip:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'.
> 0.004203 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005023 foreach_func (2): Loaded 'Serial Port 0'
> ('serial:/dev/ttyS0') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005065 foreach_func (2): Loaded 'Serial Port 1'
> ('serial:/dev/ttyS1') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005083 foreach_func (2): Loaded 'Serial Port 2'
> ('serial:/dev/ttyS2') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005101 foreach_func (2): Loaded 'Serial Port 3'
> ('serial:/dev/ttyS3') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005118 foreach_func (2): Loaded 'Serial Port 4'
> ('serial:/dev/ttyS4') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005135 foreach_func (2): Loaded 'Serial Port 5'
> ('serial:/dev/ttyS5') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005152 foreach_func (2): Loaded 'Serial Port 6'
> ('serial:/dev/ttyS6') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005169 foreach_func (2): Loaded 'Serial Port 7'
> ('serial:/dev/ttyS7') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005186 foreach_func (2): Loaded 'Serial Port 8'
> ('serial:/dev/ttyS8') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005203 foreach_func (2): Loaded 'Serial Port 9'
> ('serial:/dev/ttyS9') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005220 foreach_func (2): Loaded 'Serial Port 10'
> ('serial:/dev/ttyS10') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005237 foreach_func (2): Loaded 'Serial Port 11'
> ('serial:/dev/ttyS11') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005254 foreach_func (2): Loaded 'Serial Port 12'
> ('serial:/dev/ttyS12') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005271 foreach_func (2): Loaded 'Serial Port 13'
> ('serial:/dev/ttyS13') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005287 foreach_func (2): Loaded 'Serial Port 14'
> ('serial:/dev/ttyS14') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005304 foreach_func (2): Loaded 'Serial Port 15'
> ('serial:/dev/ttyS15') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005322 foreach_func (2): Loaded 'Serial Port 16'
> ('serial:/dev/ttyS16') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005338 foreach_func (2): Loaded 'Serial Port 17'
> ('serial:/dev/ttyS17') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005355 foreach_func (2): Loaded 'Serial Port 18'
> ('serial:/dev/ttyS18') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005372 foreach_func (2): Loaded 'Serial Port 19'
> ('serial:/dev/ttyS19') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005389 foreach_func (2): Loaded 'Serial Port 20'
> ('serial:/dev/ttyS20') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005406 foreach_func (2): Loaded 'Serial Port 21'
> ('serial:/dev/ttyS21') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005423 foreach_func (2): Loaded 'Serial Port 22'
> ('serial:/dev/ttyS22') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005440 foreach_func (2): Loaded 'Serial Port 23'
> ('serial:/dev/ttyS23') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005457 foreach_func (2): Loaded 'Serial Port 24'
> ('serial:/dev/ttyS24') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005493 foreach_func (2): Loaded 'Serial Port 25'
> ('serial:/dev/ttyS25') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005510 foreach_func (2): Loaded 'Serial Port 26'
> ('serial:/dev/ttyS26') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005527 foreach_func (2): Loaded 'Serial Port 27'
> ('serial:/dev/ttyS27') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005544 foreach_func (2): Loaded 'Serial Port 28'
> ('serial:/dev/ttyS28') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005561 foreach_func (2): Loaded 'Serial Port 29'
> ('serial:/dev/ttyS29') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005578 foreach_func (2): Loaded 'Serial Port 30'
> ('serial:/dev/ttyS30') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005595 foreach_func (2): Loaded 'Serial Port 31'
> ('serial:/dev/ttyS31') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005613 foreach_func (2): Loaded 'Serial Port Device'
> ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005630 foreach_func (2): Loaded '' ('^serial:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'.
> 0.005647 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.028810 foreach_func (2): Loaded '' ('^usb:') from
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.028929 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,007') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.028963 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,006') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.028991 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,005') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.029020 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,004') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.029047 foreach_func (2): Loaded 'Universal Serial Bus'
> ('usb:001,002') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'.
> 0.029074 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'.
> 0.030020 foreach_func (2): Called for filename
> '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'.
> 0.030892 gp_port_info_list_count (2): Counting entries (45 available)...
> 0.030960 gp_port_info_list_count (2): 40 regular entries available.
> 0.031062 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries
> from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27'...
> 0.031289 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ax203'.
> 0.031324 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/canon'.
> 0.031348 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/digigr8'.
> 0.031370 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/dimagev'.
> 0.031393 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/directory'.
> 0.031415 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/docupen'.
> 0.031438 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/jl2005a'.
> 0.031462 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/jl2005c'.
> 0.031485 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/kodak_dc240'.
> 0.031508 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/lumix'.
> 0.031530 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/mars'.
> 0.031555 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/pentax'.
> 0.031617 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ptp2'.
> 0.031642 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ricoh_g3'.
> 0.031667 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/sierra'.
> 0.031690 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/sonix'.
> 0.031714 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/sq905'.
> 0.031737 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/st2205'.
> 0.031782 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/topfield'.
> 0.031820 foreach_func (2): Found
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/tp6801'.
> 0.031851 gp_abilities_list_load_dir (2): Found 20 camera drivers.
> 0.121658 gp_port_info_list_count (2): Counting entries (45 available)...
> 0.121700 gp_port_info_list_count (2): 40 regular entries available.
> 0.121710 gp_port_new (2): Creating new device...
> 0.121720 gp_port_info_list_get_info (2): Getting info of entry 0 (45
> available)...
> 0.121972 gp_port_set_settings (2): Setting settings...
> 0.121991 gp_port_info_list_get_info (2): Getting info of entry 1 (45
> available)...
> 0.122134 gp_port_set_settings (2): Setting settings...
> 0.122147 gp_port_info_list_get_info (2): Getting info of entry 2 (45
> available)...
> 0.122336 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.122349 gp_port_set_settings (2): Setting settings...
> 0.122357 gp_port_info_list_get_info (2): Getting info of entry 3 (45
> available)...
> 0.122503 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.122516 gp_port_set_settings (2): Setting settings...
> 0.122524 gp_port_info_list_get_info (2): Getting info of entry 4 (45
> available)...
> 0.122666 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.122679 gp_port_set_settings (2): Setting settings...
> 0.122687 gp_port_info_list_get_info (2): Getting info of entry 5 (45
> available)...
> 0.122836 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.122853 gp_port_set_settings (2): Setting settings...
> 0.122861 gp_port_info_list_get_info (2): Getting info of entry 6 (45
> available)...
> 0.123003 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.123016 gp_port_set_settings (2): Setting settings...
> 0.123024 gp_port_info_list_get_info (2): Getting info of entry 7 (45
> available)...
> 0.123161 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.123174 gp_port_set_settings (2): Setting settings...
> 0.123182 gp_port_info_list_get_info (2): Getting info of entry 8 (45
> available)...
> 0.123317 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.123330 gp_port_set_settings (2): Setting settings...
> 0.123337 gp_port_info_list_get_info (2): Getting info of entry 9 (45
> available)...
> 0.123475 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.123488 gp_port_set_settings (2): Setting settings...
> 0.123496 gp_port_info_list_get_info (2): Getting info of entry 10 (45
> available)...
> 0.123637 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.123649 gp_port_set_settings (2): Setting settings...
> 0.123657 gp_port_info_list_get_info (2): Getting info of entry 11 (45
> available)...
> 0.123803 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.123820 gp_port_set_settings (2): Setting settings...
> 0.123827 gp_port_info_list_get_info (2): Getting info of entry 12 (45
> available)...
> 0.124005 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.124023 gp_port_set_settings (2): Setting settings...
> 0.124034 gp_port_info_list_get_info (2): Getting info of entry 13 (45
> available)...
> 0.124235 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.124265 gp_port_set_settings (2): Setting settings...
> 0.124278 gp_port_info_list_get_info (2): Getting info of entry 14 (45
> available)...
> 0.124490 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.124509 gp_port_set_settings (2): Setting settings...
> 0.124521 gp_port_info_list_get_info (2): Getting info of entry 15 (45
> available)...
> 0.124736 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.124764 gp_port_set_settings (2): Setting settings...
> 0.124784 gp_port_info_list_get_info (2): Getting info of entry 16 (45
> available)...
> 0.125003 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.125021 gp_port_set_settings (2): Setting settings...
> 0.125033 gp_port_info_list_get_info (2): Getting info of entry 17 (45
> available)...
> 0.125244 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.125262 gp_port_set_settings (2): Setting settings...
> 0.125274 gp_port_info_list_get_info (2): Getting info of entry 18 (45
> available)...
> 0.125488 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.125505 gp_port_set_settings (2): Setting settings...
> 0.125516 gp_port_info_list_get_info (2): Getting info of entry 19 (45
> available)...
> 0.125714 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.125732 gp_port_set_settings (2): Setting settings...
> 0.125744 gp_port_info_list_get_info (2): Getting info of entry 20 (45
> available)...
> 0.125974 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.125997 gp_port_set_settings (2): Setting settings...
> 0.126009 gp_port_info_list_get_info (2): Getting info of entry 21 (45
> available)...
> 0.126227 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.126244 gp_port_set_settings (2): Setting settings...
> 0.126256 gp_port_info_list_get_info (2): Getting info of entry 22 (45
> available)...
> 0.126450 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.126467 gp_port_set_settings (2): Setting settings...
> 0.126478 gp_port_info_list_get_info (2): Getting info of entry 23 (45
> available)...
> 0.126683 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.126701 gp_port_set_settings (2): Setting settings...
> 0.126712 gp_port_info_list_get_info (2): Getting info of entry 24 (45
> available)...
> 0.127155 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.127178 gp_port_set_settings (2): Setting settings...
> 0.127187 gp_port_info_list_get_info (2): Getting info of entry 25 (45
> available)...
> 0.127371 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.127384 gp_port_set_settings (2): Setting settings...
> 0.127392 gp_port_info_list_get_info (2): Getting info of entry 26 (45
> available)...
> 0.127562 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.127575 gp_port_set_settings (2): Setting settings...
> 0.127583 gp_port_info_list_get_info (2): Getting info of entry 27 (45
> available)...
> 0.127726 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.127738 gp_port_set_settings (2): Setting settings...
> 0.127746 gp_port_info_list_get_info (2): Getting info of entry 28 (45
> available)...
> 0.127901 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.127917 gp_port_set_settings (2): Setting settings...
> 0.127925 gp_port_info_list_get_info (2): Getting info of entry 29 (45
> available)...
> 0.128059 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.128071 gp_port_set_settings (2): Setting settings...
> 0.128078 gp_port_info_list_get_info (2): Getting info of entry 30 (45
> available)...
> 0.128237 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.128249 gp_port_set_settings (2): Setting settings...
> 0.128257 gp_port_info_list_get_info (2): Getting info of entry 31 (45
> available)...
> 0.128390 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.128410 gp_port_set_settings (2): Setting settings...
> 0.128417 gp_port_info_list_get_info (2): Getting info of entry 32 (45
> available)...
> 0.128579 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.128596 gp_port_set_settings (2): Setting settings...
> 0.128606 gp_port_info_list_get_info (2): Getting info of entry 33 (45
> available)...
> 0.128766 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.128784 gp_port_set_settings (2): Setting settings...
> 0.128791 gp_port_info_list_get_info (2): Getting info of entry 34 (45
> available)...
> 0.128926 gp_port_set_timeout (2): Setting port timeout to 500
> milliseconds.
> 0.128938 gp_port_set_settings (2): Setting settings...
> 0.128945 gp_port_info_list_get_info (2): Getting info of entry 35 (45
> available)...
> 0.135826 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.135861 gp_port_set_settings (2): Setting settings...
> 0.135883 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,007, (new int=0, conf=-1, alt=-1) port usb:001,007
> 0.135891 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.135900 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.136501 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.137009 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.137056 gp_port_info_list_get_info (2): Getting info of entry 36 (45
> available)...
> 0.144999 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.145033 gp_port_set_settings (2): Setting settings...
> 0.145052 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,006, (new int=0, conf=-1, alt=-1) port usb:001,006
> 0.145059 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.145067 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.145591 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.146050 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.146095 gp_port_info_list_get_info (2): Getting info of entry 37 (45
> available)...
> 0.153068 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.153099 gp_port_set_settings (2): Setting settings...
> 0.153117 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,005, (new int=0, conf=-1, alt=-1) port usb:001,005
> 0.153124 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.153132 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.153659 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.154087 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.154135 gp_port_info_list_get_info (2): Getting info of entry 38 (45
> available)...
> 0.163065 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.163100 gp_port_set_settings (2): Setting settings...
> 0.163121 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,004, (new int=0, conf=-1, alt=-1) port usb:001,004
> 0.163129 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.163137 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.163682 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)...
> 0.164164 gp_libusb1_find_device_by_class_lib(2): Looking for USB device
> (class 0x6, subclass, 0x1, protocol 0x1)...
> 0.164217 gp_port_info_list_get_info (2): Getting info of entry 39 (45
> available)...
> 0.171382 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.171415 gp_port_set_settings (2): Setting settings...
> 0.171435 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,002, (new int=0, conf=-1, alt=-1) port usb:001,002
> 0.171442 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.171451 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras...
> 0.171510 gp_libusb1_find_device_lib (2): Looking for USB device (vendor
> 0x5ac, product 0x12a8)... found.
> 0.171566 gp_libusb1_find_device_lib (2): Detected defaults: config 1,
> interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
> 0.171576 gp_abilities_list_detect_usb(2): Found 'Apple iPhone 5 (PTP mode)'
> (0x5ac,0x12a8)
> 0.171613 gp_port_free (2): Freeing port...
> 0.171622 gp_port_close (2): Closing port...
> 0.171855 gp_camera_set_abilities (2): Setting abilities ('Apple iPhone 5
> (PTP mode)')...
> 0.171874 gp_setting_set (2): Setting key 'model' to value 'Apple
> iPhone 5 (PTP mode)' (gphoto2)
> 0.171883 save_settings (2): Saving 2 setting(s) to file
> "/home/steve/.gphoto/settings"
> 0.172034 gp_port_info_list_lookup_path(2): Looking for path 'usb:001,002' (45
> entries available)...
> 0.172047 gp_port_info_list_get_info (2): Getting info of entry 39 (45
> available)...
> 0.172055 gp_camera_set_port_info (2): Setting port info for port
> 'Universal Serial Bus' at 'usb:001,002'...
> 0.179236 gp_port_set_timeout (2): Setting port timeout to 5000
> milliseconds.
> 0.179268 gp_port_set_settings (2): Setting settings...
> 0.179287 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port
> usb:001,002, (new int=0, conf=-1, alt=-1) port usb:001,002
> 0.179294 gp_libusb1_update (2): lowlevel libusb1 port not yet
> opened, no need for libusb changes
> 0.179303 gp_setting_set (2): Setting key 'port' to value
> 'usb:001,002' (gphoto2)
> 0.179312 save_settings (2): Saving 2 setting(s) to file
> "/home/steve/.gphoto/settings"
> 0.179499 gp_camera_init (2): Initializing camera...
> 0.179525 gp_libusb1_find_device_lib (2): Looking for USB device (vendor
> 0x5ac, product 0x12a8)... found.
> 0.179584 gp_libusb1_find_device_lib (2): Detected defaults: config 1,
> interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
> 0.179594 gp_camera_init (2): Loading
> '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.27/ptp2'...
> 0.180977 gp_port_open (2): Opening USB port...
> 0.180997 gp_libusb1_open (2): ()
> 0.181033 gp_libusb1_open (2): claiming interface 0
> 0.181188 camera_init (2): maxpacketsize 512
> 0.181206 gp_port_set_timeout (2): Setting port timeout to 8000
> milliseconds.
> 0.181214 ptp (2): PTP: Opening session
> 0.181234 ptp_usb_sendreq (2): Sending PTP_OC 0x1002 (Open
> session) (0x1) request...
> 0.181242 gp_port_write (3): Writing 16 = 0x10 bytes to port...
> 0.181318 gp_port_write (3): Wrote 16 = 0x10 bytes to port:
> (hexdump of 16 bytes)
> 0000 10 00 00 00 01 00 02 10-00 00 00 00 01 00 00 00 ................
>
> 0.181330 ptp_usb_getresp (2): Reading PTP_OC 0x1002 (Open
> session) response...
> 0.181345 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.191169 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-00 00 00 00 ....... ....
>
> 0.191226 gp_port_set_timeout (2): Setting port timeout to 20000
> milliseconds.
> 0.191248 ptp_usb_sendreq (2): Sending PTP_OC 0x1001 (Get device
> info) request...
> 0.191260 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.191359 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 01 10-01 00 00 00 ............
>
> 0.191379 ptp_usb_getdata (2): Reading PTP_OC 0x1001 (Get device
> info) data...
> 0.191415 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.196173 gp_port_read (3): Read 295 = 0x127 out of 1024
> bytes from port: (hexdump of 295 bytes)
> 0000 27 01 00 00 02 00 01 10-01 00 00 00 6e 00 06 00 '...........n...
> 0010 00 00 f0 05 0e 49 00 43-00 50 00 45 00 5e 00 30 .....I.C.P.E.^.0
> 0020 00 26 00 43 00 50 00 4c-00 53 00 5e 00 30 00 00 .&.C.P.L.S.^.0..
> 0030 00 00 00 21 00 00 00 01-10 02 10 03 10 04 10 05 ...!............
> 0040 10 06 10 07 10 08 10 09-10 0a 10 0b 10 14 10 15 ................
> 0050 10 1b 10 23 10 01 90 02-90 03 90 04 90 05 90 06 ...#............
> 0060 90 07 90 08 90 09 90 0b-90 0c 90 0e 90 01 97 02 ................
> 0070 97 01 98 02 98 03 98 05-98 0b 00 00 00 01 40 02 ..............@.
> 0080 40 03 40 04 40 05 40 06-40 04 c7 05 c7 06 c7 07 @.@.@.@.@.......
> 0090 c7 08 c7 02 00 00 00 02-d3 07 da 04 00 00 00 01 ................
> 00a0 30 01 38 0b 38 0d 38 10-00 00 00 00 30 01 30 02 0.8.8.8.....0.0.
> 00b0 30 07 30 08 30 09 30 0a-30 0b 30 0c 30 0d 30 01 0.0.0.0.0.0.0.0.
> 00c0 38 0b 38 0d 38 01 b4 02-b4 21 b4 0b 41 00 70 00 8.8.8....!..A.p.
> 00d0 70 00 6c 00 65 00 20 00-49 00 6e 00 63 00 2e 00 p.l.e. .I.n.c...
> 00e0 00 00 0d 41 00 70 00 70-00 6c 00 65 00 20 00 69 ...A.p.p.l.e. .i
> 00f0 00 50 00 68 00 6f 00 6e-00 65 00 00 00 07 31 00 .P.h.o.n.e....1.
> 0100 36 00 2e 00 37 00 2e 00-38 00 00 00 0d 46 00 44 6...7...8....F.D
> 0110 00 34 00 59 00 37 00 34-00 31 00 36 00 4a 00 43 .4.Y.7.4.1.6.J.C
> 0120 00 4d 00 34 00 00 00 - .M.4...
>
> 0.196202 ptp_usb_getresp (2): Reading PTP_OC 0x1001 (Get device
> info) response...
> 0.196211 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.196560 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-01 00 00 00 ....... ....
>
> 0.196596 print_debug_deviceinfo (2): Device info:
> 0.196605 print_debug_deviceinfo (2): Manufacturer: Apple Inc.
> 0.196612 print_debug_deviceinfo (2): Model: Apple iPhone
> 0.196618 print_debug_deviceinfo (2): device version: 16.7.8
> 0.196625 print_debug_deviceinfo (2): serial number: 'FD4Y7416JCM4'
> 0.196631 print_debug_deviceinfo (2): Vendor extension ID: 0x00000006
> 0.196638 print_debug_deviceinfo (2): Vendor extension version: 1520
> 0.196645 print_debug_deviceinfo (2): Vendor extension description:
> ICPE^0&CPLS^0
> 0.196651 print_debug_deviceinfo (2): Functional Mode: 0x0000
> 0.196658 print_debug_deviceinfo (2): PTP Standard Version: 110
> 0.196664 print_debug_deviceinfo (2): Supported operations:
> 0.196673 print_debug_deviceinfo (2): 0x1001 (Get device info)
> 0.196680 print_debug_deviceinfo (2): 0x1002 (Open session)
> 0.196687 print_debug_deviceinfo (2): 0x1003 (Close session)
> 0.196694 print_debug_deviceinfo (2): 0x1004 (Get storage IDs)
> 0.196700 print_debug_deviceinfo (2): 0x1005 (Get storage info)
> 0.196707 print_debug_deviceinfo (2): 0x1006 (Get number of objects)
> 0.196714 print_debug_deviceinfo (2): 0x1007 (Get object handles)
> 0.196721 print_debug_deviceinfo (2): 0x1008 (Get object info)
> 0.196728 print_debug_deviceinfo (2): 0x1009 (Get object)
> 0.196735 print_debug_deviceinfo (2): 0x100a (Get thumbnail)
> 0.196741 print_debug_deviceinfo (2): 0x100b (Delete object)
> 0.196748 print_debug_deviceinfo (2): 0x1014 (Get device property
> description)
> 0.196763 print_debug_deviceinfo (2): 0x1015 (Get device property value)
> 0.196775 print_debug_deviceinfo (2): 0x101b (Get partial object)
> 0.196782 print_debug_deviceinfo (2): 0x1023 (Get Filesystem Manifest)
> 0.196789 print_debug_deviceinfo (2): 0x9001 (Unknown PTP_OC)
> 0.196796 print_debug_deviceinfo (2): 0x9002 (Unknown PTP_OC)
> 0.196803 print_debug_deviceinfo (2): 0x9003 (Unknown PTP_OC)
> 0.196809 print_debug_deviceinfo (2): 0x9004 (Unknown PTP_OC)
> 0.196816 print_debug_deviceinfo (2): 0x9005 (Unknown PTP_OC)
> 0.196849 print_debug_deviceinfo (2): 0x9006 (Unknown PTP_OC)
> 0.196855 print_debug_deviceinfo (2): 0x9007 (Unknown PTP_OC)
> 0.196862 print_debug_deviceinfo (2): 0x9008 (Unknown PTP_OC)
> 0.196869 print_debug_deviceinfo (2): 0x9009 (Unknown PTP_OC)
> 0.196876 print_debug_deviceinfo (2): 0x900b (Unknown PTP_OC)
> 0.196882 print_debug_deviceinfo (2): 0x900c (Unknown PTP_OC)
> 0.196889 print_debug_deviceinfo (2): 0x900e (Unknown PTP_OC)
> 0.196896 print_debug_deviceinfo (2): 0x9701 (Unknown PTP_OC)
> 0.196903 print_debug_deviceinfo (2): 0x9702 (Unknown PTP_OC)
> 0.196909 print_debug_deviceinfo (2): 0x9801 (Get object properties
> supported)
> 0.196916 print_debug_deviceinfo (2): 0x9802 (Get object property
> description)
> 0.196941 print_debug_deviceinfo (2): 0x9803 (Get object property value)
> 0.196947 print_debug_deviceinfo (2): 0x9805 (Get object property list)
> 0.196954 print_debug_deviceinfo (2): Events Supported:
> 0.196961 print_debug_deviceinfo (2): 0x4001 (CancelTransaction)
> 0.196967 print_debug_deviceinfo (2): 0x4002 (ObjectAdded)
> 0.196974 print_debug_deviceinfo (2): 0x4003 (ObjectRemoved)
> 0.196980 print_debug_deviceinfo (2): 0x4004 (StoreAdded)
> 0.196987 print_debug_deviceinfo (2): 0x4005 (StoreRemoved)
> 0.196993 print_debug_deviceinfo (2): 0x4006 (DevicePropChanged)
> 0.197000 print_debug_deviceinfo (2): 0xc704 (Unknown Event)
> 0.197006 print_debug_deviceinfo (2): 0xc705 (Unknown Event)
> 0.197013 print_debug_deviceinfo (2): 0xc706 (Unknown Event)
> 0.197019 print_debug_deviceinfo (2): 0xc707 (Unknown Event)
> 0.197026 print_debug_deviceinfo (2): 0xc708 (Unknown Event)
> 0.197032 print_debug_deviceinfo (2): Device Properties Supported:
> 0.197041 print_debug_deviceinfo (2): 0xd302 (Unknown DPC code)
> 0.197048 print_debug_deviceinfo (2): 0xda07 (Unknown DPC code)
> 0.197056 print_debug_deviceinfo (2): Device info:
> 0.197063 print_debug_deviceinfo (2): Manufacturer: Apple Inc.
> 0.197070 print_debug_deviceinfo (2): Model: Apple iPhone
> 0.197076 print_debug_deviceinfo (2): device version: 16.7.8
> 0.197082 print_debug_deviceinfo (2): serial number: 'FD4Y7416JCM4'
> 0.197089 print_debug_deviceinfo (2): Vendor extension ID: 0x00000006
> 0.197113 print_debug_deviceinfo (2): Vendor extension version: 1520
> 0.197119 print_debug_deviceinfo (2): Vendor extension description:
> ICPE^0&CPLS^0
> 0.197126 print_debug_deviceinfo (2): Functional Mode: 0x0000
> 0.197132 print_debug_deviceinfo (2): PTP Standard Version: 110
> 0.197139 print_debug_deviceinfo (2): Supported operations:
> 0.197145 print_debug_deviceinfo (2): 0x1001 (Get device info)
> 0.197152 print_debug_deviceinfo (2): 0x1002 (Open session)
> 0.197159 print_debug_deviceinfo (2): 0x1003 (Close session)
> 0.197166 print_debug_deviceinfo (2): 0x1004 (Get storage IDs)
> 0.197172 print_debug_deviceinfo (2): 0x1005 (Get storage info)
> 0.197179 print_debug_deviceinfo (2): 0x1006 (Get number of objects)
> 0.197186 print_debug_deviceinfo (2): 0x1007 (Get object handles)
> 0.197193 print_debug_deviceinfo (2): 0x1008 (Get object info)
> 0.197200 print_debug_deviceinfo (2): 0x1009 (Get object)
> 0.197206 print_debug_deviceinfo (2): 0x100a (Get thumbnail)
> 0.197213 print_debug_deviceinfo (2): 0x100b (Delete object)
> 0.197220 print_debug_deviceinfo (2): 0x1014 (Get device property
> description)
> 0.197227 print_debug_deviceinfo (2): 0x1015 (Get device property value)
> 0.197234 print_debug_deviceinfo (2): 0x101b (Get partial object)
> 0.197240 print_debug_deviceinfo (2): 0x1023 (Get Filesystem Manifest)
> 0.197247 print_debug_deviceinfo (2): 0x9001 (Unknown PTP_OC)
> 0.197254 print_debug_deviceinfo (2): 0x9002 (Unknown PTP_OC)
> 0.197261 print_debug_deviceinfo (2): 0x9003 (Unknown PTP_OC)
> 0.197267 print_debug_deviceinfo (2): 0x9004 (Unknown PTP_OC)
> 0.197274 print_debug_deviceinfo (2): 0x9005 (Unknown PTP_OC)
> 0.197286 print_debug_deviceinfo (2): 0x9006 (Unknown PTP_OC)
> 0.197293 print_debug_deviceinfo (2): 0x9007 (Unknown PTP_OC)
> 0.197300 print_debug_deviceinfo (2): 0x9008 (Unknown PTP_OC)
> 0.197306 print_debug_deviceinfo (2): 0x9009 (Unknown PTP_OC)
> 0.197313 print_debug_deviceinfo (2): 0x900b (Unknown PTP_OC)
> 0.197320 print_debug_deviceinfo (2): 0x900c (Unknown PTP_OC)
> 0.197327 print_debug_deviceinfo (2): 0x900e (Unknown PTP_OC)
> 0.197333 print_debug_deviceinfo (2): 0x9701 (Unknown PTP_OC)
> 0.197340 print_debug_deviceinfo (2): 0x9702 (Unknown PTP_OC)
> 0.197347 print_debug_deviceinfo (2): 0x9801 (Get object properties
> supported)
> 0.197354 print_debug_deviceinfo (2): 0x9802 (Get object property
> description)
> 0.197360 print_debug_deviceinfo (2): 0x9803 (Get object property value)
> 0.197367 print_debug_deviceinfo (2): 0x9805 (Get object property list)
> 0.197374 print_debug_deviceinfo (2): Events Supported:
> 0.197380 print_debug_deviceinfo (2): 0x4001 (CancelTransaction)
> 0.197387 print_debug_deviceinfo (2): 0x4002 (ObjectAdded)
> 0.197394 print_debug_deviceinfo (2): 0x4003 (ObjectRemoved)
> 0.197400 print_debug_deviceinfo (2): 0x4004 (StoreAdded)
> 0.197407 print_debug_deviceinfo (2): 0x4005 (StoreRemoved)
> 0.197413 print_debug_deviceinfo (2): 0x4006 (DevicePropChanged)
> 0.197420 print_debug_deviceinfo (2): 0xc704 (Unknown Event)
> 0.197426 print_debug_deviceinfo (2): 0xc705 (Unknown Event)
> 0.197433 print_debug_deviceinfo (2): 0xc706 (Unknown Event)
> 0.197439 print_debug_deviceinfo (2): 0xc707 (Unknown Event)
> 0.197446 print_debug_deviceinfo (2): 0xc708 (Unknown Event)
> 0.197452 print_debug_deviceinfo (2): Device Properties Supported:
> 0.197460 print_debug_deviceinfo (2): 0xd302 (Unknown DPC code)
> 0.197468 print_debug_deviceinfo (2): 0xda07 (Unknown DPC code)
> 0.197476 ptp_usb_sendreq (2): Sending PTP_OC 0x1004 (Get storage
> IDs) request...
> 0.197484 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.197550 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 04 10-02 00 00 00 ............
>
> 0.197563 ptp_usb_getdata (2): Reading PTP_OC 0x1004 (Get storage
> IDs) data...
> 0.197571 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.199683 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 04 10-02 00 00 00 01 00 00 00 ................
> 0010 01 00 01 00 - ....
>
> 0.199706 ptp_usb_getresp (2): Reading PTP_OC 0x1004 (Get storage
> IDs) response...
> 0.199715 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.200106 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-02 00 00 00 ....... ....
>
> 0.200129 gp_port_get_timeout (2): Current port timeout is 20000
> milliseconds.
> 0.200137 gp_port_set_timeout (2): Setting port timeout to 3000
> milliseconds.
> 0.200144 gp_port_set_timeout (2): Setting port timeout to 20000
> milliseconds.
> 0.200151 ptp (2): (storage=0xffffffff,
> handle=0xffffffff)
> 0.200157 ptp (2): Listing ...
> 0.200174 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0xffffffff,0x0,0xffffffff) request...
> 0.200182 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.200244 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-03 00 00 00 ff ff ff ff ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.200257 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.200265 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.201559 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-03 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.201585 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.201594 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.201797 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-03 00 00 00 ....... ....
>
> 0.201814 ptp (2): adding new objectid 0x00000001
> (nrofobs=0,j=0)
> 0.201823 ptp (2): (storage=0x00010001,
> handle=0xffffffff)
> 0.201831 ptp (2): Listing ...
> 0.201850 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0x10001,0x0,0xffffffff) request...
> 0.201860 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.201925 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-04 00 00 00 01 00 01 00 ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.201937 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.201944 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.202900 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-04 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.202952 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.202965 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.203174 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-04 00 00 00 ....... ....
>
> 0.203198 ptp (2): adding old objectid 0x00000001
> (nrofobs=1,j=0)
> 0.203211 gp_context_error (0): Sorry, your camera does not support
> generic capture
> 0.203237 gp_camera_capture [gphoto2-camera.c:1339](0):
> 'camera->functions->capture (camera, type, path, context)' failed: -6
> 0.203875 gp_camera_free (2): Freeing camera...
> 0.203899 gp_camera_exit (2): Exiting camera ('Apple iPhone 5
> (PTP mode)')...
> 0.203908 gp_port_get_timeout (2): Current port timeout is 20000
> milliseconds.
> 0.203915 gp_port_set_timeout (2): Setting port timeout to 150
> milliseconds.
> 0.203922 gp_port_check_int (3): Reading 24 = 0x18 bytes from
> interrupt endpoint...
> 0.214369 _cb_irq (2): 0x5f87de84b550 with status 0
> 0.214416 _cb_irq (3): interrupt (hexdump of 16 bytes)
> 0000 10 00 00 00 04 00 05 40-ff ff ff ff ce fa ed fe .......@........
>
> 0.214429 _cb_irq (2): Requeuing completed transfer
> 0x5f87de84b550
> 0.214467 gp_port_check_int (3): Read 16 = 0x10 out of 24 bytes
> from interrupt endpoint: (hexdump of 16 bytes)
> 0000 10 00 00 00 04 00 05 40-ff ff ff ff ce fa ed fe .......@........
>
> 0.214477 gp_port_set_timeout (2): Setting port timeout to 20000
> milliseconds.
> 0.214487 ptp (2): event: nparams=0x1, code=0x4005,
> trans_id=0xFFFFFFFF, p1=0xFEEDFACE, p2=0x0, p3=0x0
> 0.214502 ptp_usb_sendreq (2): Sending PTP_OC 0x1004 (Get storage
> IDs) request...
> 0.214509 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.214581 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 04 10-05 00 00 00 ............
>
> 0.214596 ptp_usb_getdata (2): Reading PTP_OC 0x1004 (Get storage
> IDs) data...
> 0.214605 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.216033 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 04 10-05 00 00 00 01 00 00 00 ................
> 0010 01 00 01 00 - ....
>
> 0.216069 ptp_usb_getresp (2): Reading PTP_OC 0x1004 (Get storage
> IDs) response...
> 0.216077 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.216430 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-05 00 00 00 ....... ....
>
> 0.216450 ptp (2): (storage=0xffffffff,
> handle=0xffffffff)
> 0.216458 ptp (2): Listing ...
> 0.216467 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0xffffffff,0x0,0xffffffff) request...
> 0.216475 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.216536 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-06 00 00 00 ff ff ff ff ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.216549 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.216557 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.217826 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-06 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.217859 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.217869 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.218082 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-06 00 00 00 ....... ....
>
> 0.218101 ptp (2): adding new objectid 0x00000001
> (nrofobs=0,j=0)
> 0.218110 ptp (2): (storage=0x00010001,
> handle=0xffffffff)
> 0.218117 ptp (2): Listing ...
> 0.218126 ptp_usb_sendreq (2): Sending PTP_OC 0x1007 (Get object
> handles) (0x10001,0x0,0xffffffff) request...
> 0.218134 gp_port_write (3): Writing 24 = 0x18 bytes to port...
> 0.218197 gp_port_write (3): Wrote 24 = 0x18 bytes to port:
> (hexdump of 24 bytes)
> 0000 18 00 00 00 01 00 07 10-07 00 00 00 01 00 01 00 ................
> 0010 00 00 00 00 ff ff ff ff- ........
>
> 0.218210 ptp_usb_getdata (2): Reading PTP_OC 0x1007 (Get object
> handles) data...
> 0.218217 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.219373 gp_port_read (3): Read 20 = 0x14 out of 1024 bytes
> from port: (hexdump of 20 bytes)
> 0000 14 00 00 00 02 00 07 10-07 00 00 00 01 00 00 00 ................
> 0010 01 00 00 00 - ....
>
> 0.219404 ptp_usb_getresp (2): Reading PTP_OC 0x1007 (Get object
> handles) response...
> 0.219417 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.219798 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-07 00 00 00 ....... ....
>
> 0.219821 ptp (2): adding old objectid 0x00000001
> (nrofobs=1,j=0)
> 0.219831 camera_exit (2): missed ptp event 0x4005
> (param1=feedface)
> 0.219840 ptp_usb_sendreq (2): Sending PTP_OC 0x1003 (Close
> session) request...
> 0.219847 gp_port_write (3): Writing 12 = 0xc bytes to port...
> 0.219908 gp_port_write (3): Wrote 12 = 0xc bytes to port:
> (hexdump of 12 bytes)
> 0000 0c 00 00 00 01 00 03 10-08 00 00 00 ............
>
> 0.219921 ptp_usb_getresp (2): Reading PTP_OC 0x1003 (Close
> session) response...
> 0.219928 gp_port_read (3): Reading 1024 = 0x400 bytes from
> port...
> 0.221051 gp_port_read (3): Read 12 = 0xc out of 1024 bytes
> from port: (hexdump of 12 bytes)
> 0000 0c 00 00 00 03 00 01 20-08 00 00 00 ....... ....
>
> 0.221087 gp_port_close (2): Closing port...
> 0.222207 _close_async_interrupts (2): canceling transfer 0:0x5f87de84b550
> (status 0)
> 0.222283 _close_async_interrupts (2): canceling transfer 1:0x5f87de850dc0
> (status 0)
> 0.222409 _close_async_interrupts (2): canceling transfer 2:0x5f87de8470e0
> (status 0)
> 0.222549 _close_async_interrupts (2): canceling transfer 3:0x5f87de87eff0
> (status 0)
> 0.222639 _close_async_interrupts (2): canceling transfer 4:0x5f87de839fb0
> (status 0)
> 0.222772 _close_async_interrupts (2): canceling transfer 5:0x5f87de86b0d0
> (status 0)
> 0.222904 _close_async_interrupts (2): canceling transfer 6:0x5f87de855610
> (status 0)
> 0.223030 _close_async_interrupts (2): canceling transfer 7:0x5f87de856470
> (status 0)
> 0.223169 _close_async_interrupts (2): canceling transfer 8:0x5f87de853300
> (status 0)
> 0.223294 _close_async_interrupts (2): canceling transfer 9:0x5f87de84a300
> (status 0)
> 0.223390 _cb_irq (2): 0x5f87de84b550 with status 3
> 0.223411 _cb_irq (2): Transfer 0x5f87de84b550 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223428 _cb_irq (2): 0x5f87de850dc0 with status 3
> 0.223437 _cb_irq (2): Transfer 0x5f87de850dc0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223453 _cb_irq (2): 0x5f87de8470e0 with status 3
> 0.223467 _cb_irq (2): Transfer 0x5f87de8470e0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223481 _cb_irq (2): 0x5f87de87eff0 with status 3
> 0.223492 _cb_irq (2): Transfer 0x5f87de87eff0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223507 _cb_irq (2): 0x5f87de839fb0 with status 3
> 0.223518 _cb_irq (2): Transfer 0x5f87de839fb0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223530 _cb_irq (2): 0x5f87de86b0d0 with status 3
> 0.223543 _cb_irq (2): Transfer 0x5f87de86b0d0 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223555 _cb_irq (2): 0x5f87de855610 with status 3
> 0.223569 _cb_irq (2): Transfer 0x5f87de855610 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223581 _cb_irq (2): 0x5f87de856470 with status 3
> 0.223591 _cb_irq (2): Transfer 0x5f87de856470 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223606 _cb_irq (2): 0x5f87de853300 with status 3
> 0.223621 _cb_irq (2): Transfer 0x5f87de853300 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.223638 _cb_irq (2): 0x5f87de84a300 with status 3
> 0.223652 _cb_irq (2): Transfer 0x5f87de84a300 should be
> in LIBUSB_TRANSFER_COMPLETED, but is 3!
> 0.224194 gp_filesystem_reset (2): resetting filesystem
> 0.224228 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
> 0.224236 gp_filesystem_lru_clear (2): fscache LRU list already empty
> 0.224245 delete_all_folders (2): Internally deleting all folders
> from '/'...
> 0.224253 lookup_folder (2): Lookup folder '/'...
> 0.224263 lookup_folder (2): Found! / is 0x5f87de82f890
> 0.224272 recurse_delete_folder (2): Recurse delete folder
> 0x5f87de82f890//
> 0.224281 delete_all_files (2): Delete all files in folder
> 0x5f87de82f890//
> 0.224292 gp_port_free (2): Freeing port...
> 0.224303 gp_port_close (2): Closing port...
> 0.224556 gp_filesystem_reset (2): resetting filesystem
> 0.224575 gp_filesystem_lru_clear (2): Clearing fscache LRU list...
> 0.224589 gp_filesystem_lru_clear (2): fscache LRU list already empty
> 0.224598 delete_all_folders (2): Internally deleting all folders
> from '/'...
> 0.224608 lookup_folder (2): Lookup folder '/'...
> 0.224619 lookup_folder (2): Found! / is 0x5f87de82f890
> 0.224644 recurse_delete_folder (2): Recurse delete folder
> 0x5f87de82f890//
> 0.224655 delete_all_files (2): Delete all files in folder
> 0x5f87de82f890//
> _______________________________________________
> Gphoto-devel mailing list
> Gphoto-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gphoto-devel
_______________________________________________
Gphoto-devel mailing list
Gphoto-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gphoto-devel
