Hello once more after reading your mail again I noticed that you say DHCP and TFTP work is done, and then gPXE starts. Does that mean you're using 'undionly.kpxe'? If that's the case we will have to look in a different direction to find the problem.
-- Thomas On Thu, Jul 29, 2010 at 11:50 AM, Thomas Miletich <thomas.milet...@gmail.com> wrote: > Hello > from a quick comparison between the gPXE and linux driver I can't see > any differences in the handling of 8111B specific things. As the > non-variant-specific code in the r8169 driver is well tested I don't > know what could be the problem. > > To give us an idea about the problem we need more information from the driver. > > If you have another computer and a serial cable you can enable serial > console output by editing 'src/config/console.h'. > In this file please replace "//#define CONSOLE_SERIAL" with > "#define CONSOLE_SERIAL". > > You can enable debugging output from the driver by building gPXE with > this command: > > make bin/r8169.dsk DEBUG=r8169 > > (adjust 'bin/r8169.dsk' to the image type you're using) > > Now capture the output from gPXE on the other computer using some > terminal program(default settings are 115200 8N1) > Please send us the capture so we can look into the problem. > > -- > Thomas > > On Thu, Jul 29, 2010 at 10:26 AM, 朱堃 <bozer1...@gmail.com> wrote: >> I have a motherboard with onboard LAN RTL8111B.This device is work well in >> windows xp. I run it with gPXE . I get error. I run Wireshark to monitor >> network in the server, DHCP ,TFTP work done, gPXE start work. In network >> moniter , it show repeat arp request and reply. In gpxe , i found netdevice >> can transmit packet, but can't not receive packet.gPXE is not support >> RTL8111B? >> >> _______________________________________________ >> gPXE-devel mailing list >> gPXE-devel@etherboot.org >> http://etherboot.org/mailman/listinfo/gpxe-devel >> >> > _______________________________________________ gPXE-devel mailing list gPXE-devel@etherboot.org http://etherboot.org/mailman/listinfo/gpxe-devel