On Sun, Dec 20, 2009 at 5:42 AM, gregwm <[email protected]> wrote: >> >> gPXE initialising devices... >> Tigon3 [partno(BCM95901A50) rev 3001 PHY(5705)] (PCI:33MHz:32-bit) >> Valid link not established >> >> >> gPXE 0.9.9+ -- Open Source Boot Firmware -- http://etherboot.org >> Features: AoE HTTP iSCSI DNS TFTP bzImage COMBOOT ELF Multiboot PXE PXEXT >> >> gPXE> iwstat >> gPXE> iwlist >> gPXE> > > btw i am not building on the machine with the rtl, i am assuming that does > not matter
gPXE isn't seeing your rtl8185 card at all. Is this a laptop with the card built-in or something? Sometimes there's something special that has to be done to enable it... check your BIOS for appropriate settings. Also try nm bin/gpxe.lkrn.tmp | grep obj_rtl818 to make sure the rtl8185 driver is actually compiled in. -- Josh _______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
