I have tested kernel-xen on iscsi boot on other machine (very different
configuration) without problem.
--- 2010年2月10日 星期三，Aclhk Aclhk <[email protected]> 寫道﹕
寄件人: Aclhk Aclhk <[email protected]>
主題: Re: [gPXE] sanboot failed for intel motherboard - s3200sh
收件人: "Shao Miller" <[email protected]>
副本(CC): [email protected]
日期: 2010年2月10日,星期三,上午3:30
thank you for your advice. the boot code was installed to local hdd without
notice. after the local hdd was removed before installation, iscsi boot was ok.
i have another question. the booting stopped for kernel-xen and ok for normal
kernel. attached is the screen capture.
booting kernel-xen using local hdd is ok.
pls advise.
--- 2010年2月9日 星期二，Shao Miller <[email protected]> 寫道﹕
寄件人: Shao Miller <[email protected]>
主題: Re: [gPXE] sanboot failed for intel motherboard - s3200sh
收件人: "Aclhk Aclhk" <[email protected]>
副本(CC): [email protected]
日期: 2010年2月9日,星期二,下午3:30
Aclhk Aclhk wrote:
i have install centos 5.4-64bit. I followed your
instruction to install the diag MBR.
sanboot iscsi:192.168.1.1::::iscsi-gpxe
Registered as BIOS drive 0x80
Booting from BIOS drive 0x80
L D80 C3FF HFF S3F P1 O0000003F M0000 E00
the booting then stopped.
Thanks to T. J. who produced this diagnostic MBR, we can easily see
that your boot-sector at sector 63 (O...3F) for your active partition
has no magic (M0000 instead of MAA55). I'd bet there's no boot-code
installed on your active partition's boot-sector. Is this what you
were expecting?
- Shao Miller
Yahoo!香港提供網上安全攻略，教你如何防範黑客!了解更多
-----內含下列附件-----
_______________________________________________
gPXE mailing list
[email protected]
http://etherboot.org/mailman/listinfo/gpxe
Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!_______________________________________________
gPXE mailing list
[email protected]
http://etherboot.org/mailman/listinfo/gpxe
