I apologize, I misread your previous message. you'll need a TFTP server for PXE chainloading, I believe it wouldn't be too hard to set up.
Tal ----- Original Message ----- From: Tal Aloni To: gpxe Sent: Saturday, February 13, 2010 7:48 PM Subject: Re: [gPXE] Additional NIC-Drivers Well, then you don't need a linux driver, UNDI will work just fine, just get undionly.kpxe from rom-o-matic. read more about UNDI driver here: http://etherboot.org/wiki/pxechaining Regards, Tal ----- Original Message ----- From: [email protected] To: Tal Aloni Sent: Saturday, February 13, 2010 7:41 PM Subject: Re: [gPXE] Additional NIC-Drivers I ´ve got just a small network, i´d like to use GPXE to boot my Win7 HTPC via ISCSI from my FreeNAS. I´ve got no dedicated PXE-Server for chainloading. I run GPXE from a usb-key in my HTPC. Generally a linux driver is avaible (take a look at: http://www.hogchain.net/attansic/attansic.html ) Regards, Wolfgang Tal Aloni <[email protected]> hat am 13. Februar 2010 um 18:33 geschrieben: > Hi, > if it's supported on linux (try ubuntu), then it might be possible, been there myself. > however, you can use PXE chainloading and then use the UNDI driver, which is the easiest way IMO. > what's your goal? > > Tal > ----- Original Message ----- > From: [email protected] > To: [email protected] > Sent: Saturday, February 13, 2010 7:26 PM > Subject: [gPXE] Additional NIC-Drivers > > > Hi, is it possible to add a custom nic driver by myself ? > My Mainboard uses an Attansic 1L Network-Card, unfortunatly i found only a driver for 1969:1026 (ATL1E) and not for my 1969:1048 (ATL1)... > > Regards, > Wolfgang > > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > gPXE mailing list > [email protected] > http://etherboot.org/mailman/listinfo/gpxe > > Hi, > if it's supported on linux (try ubuntu), then it might be possible, been there myself. > however, you can use PXE chainloading and then use the UNDI driver, which is the easiest way IMO. > what's your goal? > > Tal > ----- Original Message ----- > > > > From:[email protected] > > To:[email protected] > > Sent:Saturday, February 13, 2010 7:26 PM > > Subject:[gPXE] Additional NIC-Drivers > > > > Hi, is it possible to add a custom nic driver by myself ? > > My Mainboard uses an Attansic 1L Network-Card, unfortunatly i found only a driver for 1969:1026 (ATL1E) and not for my 1969:1048 (ATL1)... > > > > Regards, > > Wolfgang > > > > > > > > _______________________________________________ > > gPXE mailing list > > [email protected] > > http://etherboot.org/mailman/listinfo/gpxe > > > _______________________________________________ > gPXE mailing list > [email protected] > http://etherboot.org/mailman/listinfo/gpxe
_______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
