Hi, I have 3 ethernet cards: two of them are realtek 8169(10ec:8169) and the other one ise onboard realtek 8168. Now, If I integrate for onboard 8168 driver, bios goes to dead, and it doesn't load. I have gigabyte mb with dual bios support, so no problem for dead bios. After the bios was dead, I loaded backup bios, and I tried again to integrate for 8168, and the result is same. After that I integrated gpxe for external 8169 cards. Bios worked well, but this time, I can't reach the bios! Bios didn't open when I press the "del" button repeatedly. Gpxe can be loaded, and boot selection menu(F12) can be loaded, but bios can't. When I press del button, system was crashed. If I wait to pass gpxe after boot sequence, a white screen comes up and system is crashing again. So if gpxe can't find any dhcp server or any iscsi path, the system is crashing. My mab is Gigabyte GA-MA785GMT-UD2H(rev 1.0) Bios version is F7 There no hdd or dvdrom in the machine and there is a 2GB one module ddr3 ram.
Gpxe can find iscsi target and lun, but what should I do if I want to enter the bios, or If I want to gpxe not to crush after the boot sequence? Regards. _______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
