Hello There was a big modification to the eepro100 driver a few releases back, this could be a bug introduced then. Please try a version with the old driver(0.9.7 should work) and tell us your results.
13.04.2010 23:24 schrieb am <tr...@cs.drexel.edu>: Hello, Using a eepro100 card (full description below), gpxe detects the card and tries to dhcp from it but the connection times out. Normal pxe however gets an address (and I cannot chain gpxe because of the setup). This happens with git and 1.0.0 both built from source and from rom-o-matic. Because the system refuses to read the .usb image (when dd'd to a device) I am using syslinux as the boot loader. Steps taken Generate gpxe.lkrn via rom-o-matic/src. mkdiskimage -4 /dev/sdb 0 64 32 syslinux /dev/sdb mount /dev/sdb4 /mnt/disk cp gpxe.lkrn /mnt/disk/gpxe.lkrn modify syslinux.cfg and boot. Card information (pciconf -lv) f...@pci0:1:3:0: class=0x020000 card=0x10408086 chip=0x12298086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet Thanks. _______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe
_______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe