Sorry, my mistake. Certainly members should contains via, from and to.
While processing restrictions, gh look to restriction tag's value
prefix(no or only) and restrict or allow by from, via, to. There is no
difference between only_right_turn and only_left_turn if members are equals.
On 12.06.2015 16:52, Nick Bauer wrote:
I've read that the relation must have:
from, to, via.
Are you saying that it will work if the relation is only containing
from, to? Is the ordering important?
Are there certain types of restrictions that work over others? such
as no_left_turn vs only_right_turn?
On Fri, Jun 12, 2015 at 8:41 AM, dos65 <[email protected]
<mailto:[email protected]>> wrote:
Hi Nick.
Restrictions must have members(from, to). In your case restriction
don't have them and it does not processed by gh.
On 12.06.2015 16:29, Nick Bauer wrote:
Hi Peter-
Sorry for the delay. Please see:
https://graphhopper.com/maps/?point=41.616854%2C-88.122497&point=41.616365%2C-88.123473&locale=en-US&layer=Lyrk
OSM data has a turn restriction setup where you can only turn
right, however GH shows a left turn.
OSM data uses a single node with restriction:no_left_turn
Is this a sufficient relation? What is required for GH to
consider turn restrictions?
On Thu, Jun 4, 2015 at 5:14 AM, Peter <[email protected]
<mailto:[email protected]>> wrote:
Hi,
> however I am not getting the results I expect.
what result do you expect? Please be more specific e.g. also
include some coordinates or screenshots and then describe the
problem you have :)
Regards,
Peter
On 04.06.2015 02:02, Nick Bauer wrote:
Hello-
After reviewing the 0.4 list of changes, it seems to me that
turn restrictions are enabled. I have what i believe is the
correct OSM as well as config.properties file, however I am
not getting the results I expect.
I am mobile right now, so I can't post any detailed output,
but here is the config:
prepare.chWeighting=no
prepare.chShortcuts=no
osmreader.acceptWay=car
graph.flagEncoders=car
# Enable turn restrictions for car or motorcycle.
# Currently you need to additionally set
prepare.chWeighting=no before using this (see below and #270)
graph.flagEncoders=car|turnCosts=true
graph.dataaccess=RAM_STORE
How does this config look?
My OSM has to from and via relation elements. Any other
tips on how to correctly create the OSM?
Thanks,
Nick
_______________________________________________
GraphHopper mailing list
[email protected] <mailto:[email protected]>
https://lists.openstreetmap.org/listinfo/graphhopper
_______________________________________________
GraphHopper mailing list
[email protected]
<mailto:[email protected]>
https://lists.openstreetmap.org/listinfo/graphhopper
_______________________________________________
GraphHopper mailing list
[email protected] <mailto:[email protected]>
https://lists.openstreetmap.org/listinfo/graphhopper
--
Челышов Вадим
[email protected] <mailto:[email protected]>
_______________________________________________
GraphHopper mailing list
[email protected] <mailto:[email protected]>
https://lists.openstreetmap.org/listinfo/graphhopper
_______________________________________________
GraphHopper mailing list
[email protected]
https://lists.openstreetmap.org/listinfo/graphhopper
--
Челышов Вадим
[email protected]
_______________________________________________
GraphHopper mailing list
[email protected]
https://lists.openstreetmap.org/listinfo/graphhopper
