I fed just points which where classified as "ground", but which I know do contain vegetation...
From: Newcomb, Doug [mailto:[email protected]] Sent: 6. desember 2013 15:26 To: Blumentrath, Stefan Cc: [email protected] Subject: Re: [GRASS-dev] G7: v.loutlier Decomposition failed Are those bare earth points only, or are you feeding it the entire point cloud? On Fri, Dec 6, 2013 at 7:17 AM, Blumentrath, Stefan <[email protected]<mailto:[email protected]>> wrote: Hi Maybe it is not of importance, because no one else would use such extreme settings, but in case someone considers it as a bug: I was testing a bit with v.outlier in GRASS 7 on dense LiDAR data (~4 points per m2). When I use a very low Tykhonov regularization parameter (lambda_i) of 0.0000000000000000001 and rather short spline steps (1.5) at 0.5m resolution I get an error-message: "Decomposition failed at row 16499 and col 0" Stefan _______________________________________________ grass-dev mailing list [email protected]<mailto:[email protected]> http://lists.osgeo.org/mailman/listinfo/grass-dev -- Doug Newcomb USFWS Raleigh, NC 919-856-4520 ext. 14 [email protected]<mailto:[email protected]> --------------------------------------------------------------------------------------------------------- The opinions I express are my own and are not representative of the official policy of the U.S.Fish and Wildlife Service or Dept. of the Interior. Life is too short for undocumented, proprietary data formats.
_______________________________________________ grass-dev mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/grass-dev
