I tested r.out.ascii module on "elevation.dem_depth" raster file made by
spearfish.sh script I downloaded from that link (without edit it). I read that
r.sim.water writes depth values in meters:
"depth =name
Output water depth raster file [m]. "
but the values I found in the file made by r.out.ascii seem to be too high.
Here some of these values:
12.234228
31.571856
23.650991
4.344591
3.281323
2.84742
3.417606
5.154603
Maybe are they in millimeters?
Thank you for your help!
Roberto
Hamish <[EMAIL PROTECTED]> ha scritto: roberto caselli wrote:
> I installed Xubuntu on my notebook with GRASS6.2.2 (from the
> repository) and I tested spearfish.sh with good results!! Thank you
> very much for your suggestions and support!!
congrats.
> PS: I saw that elevation.dem_depth is the raster with the water
> depths in each cell. How can I see the values of these water depths?
d.legend, d.histogram, d.rast.what, d.rast.num, r.univar, r.what,
r.out.ascii, r.out.xyz (r.stats), ..
Hamish
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
---------------------------------
---------------------------------
L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail_______________________________________________
grass-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/grass-user
