The gpsbabelproblem is solved. I attach the correspondence.
Neverthelesss I still hope for answers of the GRASS-related questions.
Robert Lipe schrieb:
On Thu, Feb 21, 2008 at 10:11 AM, Philipp Steigenberger
<[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:
cause I read in
http://www.gpsbabel.org/htmldoc-development/fmt_garmin_txt.html
that one can specify a grid-parameter:
Note that big green box that says " This is the README file from the
GPSBabel distribution. It may or may not match what is installed on your
system. For the best match, be sure to use the documentation for
specific version of GPSBabel that you are using."
GPSBabel Version: 1.3.2
Grid was added after 1.3.2.
> Philipp Steigenberger schrieb:
> Im sorry,
> i'm not a native speaker, so sometimes I try to read only the
> "important" things .... (but they weren't important enough)
>
> well thanx for the hint.
>
> This minutes I already tried to install the newest version using the
> .rpm and alien -i
> but when I type gpsbabel [--help] I only get the mesage
>
> >> Floating point exception <<
>
> Do I have to install something else?
>
> best regards
> Philipp
Robert Lipe schrieb:
This minutes I already tried to install the newest version using the
.rpm and alien -i
but when I type gpsbabel [--help] I only get the mesage
>> Floating point exception <<
Do I have to install something else?
The binary distribution is for Fedora. Users of Suse or Debian-based
distributions like Ubuntu would be best served by |rpmbuild --rebuild
whatever.rpm' | on the source rpm.
Or forgo the rpm completely and build from source.
Philipp Steigenberger schrieb:
> I installed it by using the tar.gz and make, make install.
> Fisrt I got some problems, but after a restart of the bash it works very
> well.
> Thank you
> om shantih
> Philipp
>
>
[...]
Finally I want to project the data in Gauss-Krueger-Projection
(Transversal-Mercator).
I know that GRASS contains v.in.gpsbabel and v.in.garmin. Its very nice
that I get the data immediatley in Gauss-Krueger-coordinates. But using
this tools it doesn't work to import altitude-data and other
informations as well.
Is there a posibility to get Gauss-Krueger-Data just by using gpsbabel?
Between the ++++ I pasted the outputs of different attempts of
v.in.garmin and v.in.gpsbael. Jump to the END if you want to save
time!!! ;)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
v.in.garmin port=/dev/ttyUSB0 -t -p out=vingarmin_gpstrans_tracks
GPStrans (ASCII) - Version 0.39
Copyright (c) 1995 by Carsten Tschach ([EMAIL PROTECTED])
Linux/KKJ mods by Janne Sinkkonen <[EMAIL PROTECTED]> (1996)
Copyright (c) 2000 German Grid by Andreas Lange
<[EMAIL PROTECTED]>
Copyright (c) 1998,2000 Mayko-mXmap mods by Matthias Kattanek
<[EMAIL PROTECTED]>
Copyright (c) 2001 Development by Joao Seabra-CT2GNL <[EMAIL PROTECTED]>
Receiving Tracks...
ERROR: Only DDD coordinates currently supported. [DMS]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
v.in.garmin port=/dev/ttyUSB0 -t -p -u out=vingarmin_gardump_tracks
Receiving Tracks...
gardump: unknown track packet type: 0
Attempting waypoint projection transform with cs2cs...
Importing Track as points...
...
Building topology for vector map <vingarmin_gardump_tracks>...
6792 primitives registered
Building areas: 100%
---> with v.out.ascii I get this format:
4416848.824221|5359764.2067414|25 #id=25
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
v.in.garmin port=/dev/ttyUSB0 -t -p -u -z out=vingarmin_gardump_tracks_z
Receiving Tracks...
...
gardump: unknown track packet type: 0
--> WARNING: No altitude data found, creating 2D vector map <--
Attempting waypoint projection transform with cs2cs...
and so on...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
v.in.gpsbabel in=/dev/ttyUSB0 -t -p output=vingpsbabel_tracks
Loading Tracks as points from </dev/ttyUSB0>...
Attempting waypoint projection transform with cs2cs
...
Building topology for vector map <vingpsbabel_tracks>...
6792 primitives registered
Building areas: 100%
---> with v.out.ascii I get this format:
4416846.9562442|5359757.9513647|26 #id=26
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
v.in.gpsbabel in=/dev/ttyUSB0 -t -p output=vingpsbabel_tracks_ddd
for=garmin_txt,grid=ddd
Loading Tracks as points from </dev/ttyUSB0>...
'grid=ddd' is an unknown option to garmin_txt.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
v.in.gpsbabel in=/dev/ttyUSB0 -t -p output=vingpsbabel_tracks_ddd
for=garmin_txt
Loading Tracks as points from </dev/ttyUSB0>...
Quit
Does not do anything...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
END
The solution I get for me is to connect the output of v.out.ascii and
also the output of gpsbabel (both have 6792 points) paste them together,
use awk and so on and import it enentually with v.in.ascii -z
But this cannot be the final solution... can it????
_______________________________________________
grass-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/grass-user
