On Fri, 2008-11-14 at 11:20 +0100, Massimo Di Stefano wrote: > Hi, > i see the updated description in the help page, > so i tried the same command : > > r.terraflow elev=elevation.10m filled=elevation10m.filled > dir=elevation10m.mfdir swatershed=elevation10m.watershed > accumulation=elevation10m.accu tci=elevation10m.tci > > it works fine using an old binary installation (grass-6.3.app) > but tring to do the same using grass-6.4.svn.app compiled from source > or using a linux (ubuntu 8.04 32/64 bit) compiled from the grass6- > devel svn source, > i have : > > > GRASS 6.4.svn (spearfish60):~ > g.region rast=elevation.10m -ap [...] > GRASS 6.4.svn (spearfish60):~ > r.terraflow elev=elevation.10m > filled=elevation10m.filled dir=elevation10m.mfdir > swatershed=elevation10m.watershed accumulation=elevation10m.accu > tci=elevation10m.tci > Bus error > GRASS 6.4.svn (spearfish60):~ >
Hi! I can confirm (grass6_devel) this. # using my own elevation dataset r.terraflow elev=elevation_m filled=TEST_elevation_m_filled direction=TEST_direction_flow swatershed=TEST_watershed accumulation=TEST_accumulation tci=TEST_tci Segmentation fault [...] > > Hi > > > > i'm tring to use "r.terraflow" [...] > > so i used elevation.dem insted, but i've a segfault :-/ [...] > > thanks for any help! > > regards, > > Massimo Di Stefano. Regards, Nikos _______________________________________________ grass-user mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/grass-user
