Adrien, Thank you! I'll give it a try...
Tom On Tue, Apr 7, 2015 at 10:44 AM, Adrien André <[email protected]> wrote: > Dylan, Tom, > > not about the main question, but to complete Tom's answer: > > I had once to vectorize a raster stream network according to flow > direction. > You can find here the Python script i wrote: > https://github.com/adrienandrem/r.to.vect.dir > > I hope this helps. > > > Regards, > > Adrien > > > Le 05/04/2015 14:48, Thomas Adams a écrit : > > Hi Dylan! > > > > (I'm about to start a new position — more on that later). This may help… > > > > I had a problem somewhat analogous to this a little while ago, where I > > needed to create a text file that, among a couple of other things, > > needed to identify the 'downstream' pixel for all grid cells within a > > basin area. I was able to do that with help here, but an issue I had was > > that the integer IDs needed to be numbered from 0-N in basically > > upstream to downstream order, but after my GRASS analysis I had IDs with > > some large number ranging to some other very large number for the IDs > > and the 'downstream IDs' (with values skipped and not in order). I got > > help writing a Perl script that uses hashes for a lookup table to relate > > the old ID to the new ID. > > > > Perhaps you could do something like this, starting with a new vector map > > (copy) where you could simply update the attributes using an SQL query? > > Some coding would be needed, obviously… > > > > Just my 2 cents… > > > > Cheers! > > Tom > > > > On Thu, Apr 2, 2015 at 6:31 PM, Dylan Beaudette > > <[email protected] <mailto:[email protected]>> wrote: > > > > Hi, > > > > Once again, I am reminded that complex spatial analysis in other > > software > > can usually be reduced to a couple of lines of code in GRASS-- > thanks! > > > > Here is a fun question. Suppose you have a set of line segments, or > > boundaries that are the result of a digitizing process that generated > > segments out of "order": > > > > 2 4 1 3 > > O---------+-----------------+------------+------O > > > > 'O' = start / end point > > '+' = vertex > > > > ... in this case "order" is associated with order in which records > > appear > > in the attribute table and the order in which segments are drawn on > the > > screen. > > > > Is there a module, or set of modules that could be used to re-order > the > > segments so that the order of records in the attribute table and > drawing > > order is: > > > > 1 2 3 4 > > O---------+-----------------+------------+------O > > > > Note that I do not wan't to shuffle the linkages between geometry and > > attributes, rather, I would like to re-order the segments and > attribute > > table according to the linear position within the set of contiguous > > boundaries or polyline. > > > > Here is an example set of lines in ASCII format, WGS84 GCS. > > > > ORGANIZATION: > > DIGIT DATE: > > DIGIT NAME: dylan > > MAP NAME: > > MAP DATE: Thu Apr 2 11:46:34 2015 > > MAP SCALE: 1 > > OTHER INFO: > > ZONE: 0 > > MAP THRESH: 0.000000 > > VERTI: > > B 6 1 > > -118.71960108 36.71846736 > > -118.71946261 36.71783146 > > -118.71905508 36.71717314 > > -118.71863837 36.71610377 > > -118.71807413 36.71546352 > > -118.71786286 36.71527706 > > 2 132 > > B 3 1 > > -118.7153795 36.73403608 > > -118.71537992 36.73272737 > > -118.71538933 36.73177277 > > 2 133 > > B 3 1 > > -118.71536851 36.76205202 > > -118.7153724 36.7609144 > > -118.71537619 36.75980591 > > 2 150 > > B 2 1 > > -118.73128842 36.69749903 > > -118.73130166 36.69760244 > > 2 175 > > B 5 1 > > -118.71538933 36.73177277 > > -118.7153944 36.73125742 > > -118.71573607 36.73044156 > > -118.71618977 36.72875872 > > -118.71651025 36.72811846 > > 2 581 > > B 15 1 > > -118.71651025 36.72811846 > > -118.71661716 36.72766138 > > -118.71660977 36.7273294 > > -118.71645785 36.72668322 > > -118.71689758 36.7261392 > > -118.71724087 36.72567564 > > -118.71747107 36.7248177 > > -118.71753527 36.72390024 > > -118.71787045 36.72307308 > > -118.71797278 36.72237579 > > -118.71781832 36.72073331 > > -118.71825483 36.72004703 > > -118.71908689 36.71948153 > > -118.71963768 36.71863545 > > -118.71960108 36.71846736 > > 2 602 > > B 8 1 > > -118.7180943 36.70872005 > > -118.71827421 36.7083356 > > -118.71841915 36.7080259 > > -118.7190169 36.70752707 > > -118.72008403 36.70694237 > > -118.72042476 36.70636815 > > -118.72049695 36.70608245 > > -118.7212077 36.70547966 > > 2 604 > > B 15 1 > > -118.7212077 36.70547966 > > -118.721692 36.70506892 > > -118.72256889 36.70442599 > > -118.72372477 36.702873 > > -118.72417965 36.70213899 > > -118.72496002 36.70190631 > > -118.72660809 36.70183505 > > -118.72765407 36.70118732 > > -118.72831767 36.70100376 > > -118.72866574 36.7007615 > > -118.72887421 36.70026501 > > -118.72998965 36.69849669 > > -118.73066541 36.69798083 > > -118.73118943 36.69770441 > > -118.73130166 36.69760244 > > 2 609 > > B 8 1 > > -118.7153867 36.75138736 > > -118.7153804 36.7500365 > > -118.7153634 36.7464107 > > -118.7153465 36.742785 > > -118.7153296 36.7391593 > > -118.71533791 36.73753527 > > -118.7153438 36.7363838 > > -118.7153795 36.73403608 > > 2 610 > > B 13 1 > > -118.71786286 36.71527706 > > -118.71763335 36.71507451 > > -118.71748992 36.71480774 > > -118.71754381 36.71369999 > > -118.71750723 36.7131568 > > -118.71786592 36.71228789 > > -118.71745106 36.71129755 > > -118.71716489 36.71079564 > > -118.71709787 36.71043286 > > -118.71712906 36.71006868 > > -118.71740871 36.70978478 > > -118.717644 36.709369 > > -118.7180943 36.70872005 > > 2 612 > > B 7 1 > > -118.71411256 36.77582538 > > -118.71445897 36.77550631 > > -118.71478471 36.77508229 > > -118.7149828 36.77446623 > > -118.71532537 36.77406797 > > -118.7153339 36.7717931 > > -118.71534777 36.76808916 > > 2 613 > > B 3 1 > > -118.71534777 36.76808916 > > -118.71536 36.7645405 > > -118.71536851 36.76205202 > > 2 622 > > B 4 1 > > -118.71537619 36.75980591 > > -118.7153848 36.7572883 > > -118.7153973 36.7536622 > > -118.7153867 36.75138736 > > 2 623 > > > > > > I have been able to convert these segments into polylines, however, > I am > > not sure how one would go about computing the position along the > > polylines. > > Perhaps a linear referencing system? > > > > > > > > Thanks! > > Dylan > > _______________________________________________ > > grass-user mailing list > > [email protected] <mailto:[email protected]> > > http://lists.osgeo.org/mailman/listinfo/grass-user > > > > > > > > > > -- > > Thomas E Adams, III > > 718 McBurney Drive > > Lebanon, OH 45036 > > > > 1 (513) 739-9512 (cell) > > > > > > > > _______________________________________________ > > grass-user mailing list > > [email protected] > > http://lists.osgeo.org/mailman/listinfo/grass-user > > > > _______________________________________________ > grass-user mailing list > [email protected] > http://lists.osgeo.org/mailman/listinfo/grass-user > -- Thomas E Adams, III 718 McBurney Drive Lebanon, OH 45036 1 (513) 739-9512 (cell)
_______________________________________________ grass-user mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/grass-user
