hi K4arl33, i had the same problem some weeks ago...there is no possible solution with the available commands in GH except for the c# or vb script component.... you can solve the problem by c# or vb script for sure....no other possibility....(modify the interpolate command)
link to my old thread: http://groups.google.com/group/grasshopper3d/browse_thread/thread/99e8a301b46632c4# or another idea was to connect all lists with normal lines....joining them and then rebuild/change their degree (also only possible by vb or c# script, here from bgcallam): http://grasshopper3d.googlegroups.com/web/rebuild%20curves.png?gda=gZ4wykgAAABldvTupClBBQRPKkY0ld_Qo7EOaZrQJubPFWJo9iwKH0zZUrUB8_C7sj5xQqPec34lzhb83kORdLwM2moY-MeuGjVgdwNi-BwrUzBGT2hOzg&hl=en good luck. if you find another way, please tell me.... Daniela On 13 Dez., 01:31, K4rl33 <[email protected]> wrote: > Hi guys, > > I have a problem: i have 3 sets of points, where each set have the > same number of points. > I want to do multiple splines wich connect each point of the same set > with a singular point of the others. > But when I try to connect a set of point to the interpolated command, > it make the interpolated curve between all the points of the same > set...and that's wrong!!!!! > I think I would have to sort the three sets of points is some way...I > don't know..maybe telling to the software to connect only points which > have different properties in each set... > > How can I solve It without extracting each point of the 3 list and > connect each other? > > Thank you!!!
