Maybe a problem with gdal libraries. Has v.in.ascii worked some time? or never worked?
Manuel Francisco Maestre Páez [EMAIL PROTECTED] escribió: ----- Para: gary <[EMAIL PROTECTED]> De: Poizot Emmanuel <[EMAIL PROTECTED]> Enviado por: [EMAIL PROTECTED] Fecha: 29/05/2007 11:07 cc: [email protected] Asunto: Re: [GRASS-user] v.in.ascii don't work gary a écrit : > When I had a similar problem, I ended up using csv file from a > spreadsheet as the input file. > > Otto Dassau wrote: >> Hi, >> for me (GRASS 6.3cvs) the import of your test data works, the syntax is >> correct. Maybe you need to check your test.txt for <space> values in >> your >> columns etc? >> regards, >> Otto >> >> On Tue, 29 May 2007 09:31:38 +0200 >> Poizot Emmanuel <[EMAIL PROTECTED]> wrote: >> >>> Hi all, >>> >>> I'm unable to input text file in GRASS using v.in.ascii. >>> I'm (trying) working on GRASS 6.2.1 under Ubuntu Fiesty >>> >>> >>> I have a text file (test.txt) which containing: >>> 1|3.5|43.6|2.3 >>> 2|3.55|43.605|1.2 >>> 3|3.51|43.621|-2.3 >>> 4|3.485|43.704|56.1 >>> 5|3.498|43.5|7.1058 >>> >>> I would like to import it in a new layer with the following command: >>> cat test.txt | v.in.ascii out=test columns='nul int, x double, y >>> double, val double' fs="|" x=2 y=3 z=0 >>> >>> and the outputs of that command is: >>> >>> Maximum input row length: 20 >>> Maximum number of columns: 4 >>> Minimum number of columns: 4 >>> column: 1 type: integer >>> column: 2 type: double >>> column: 3 type: double >>> column: 4 type: double >>> Building topology ... >>> 0 primitives registered 0 areas built 0 isles built >>> Attaching islands: >>> Attaching centroids: Topology was built. >>> Number of nodes : 0 >>> Number of primitives: 0 >>> Number of points : 0 >>> Number of lines : 0 >>> Number of boundaries: 0 >>> Number of centroids : 0 >>> Number of areas : 0 >>> Number of isles : 0 >>> >>> So no points are imported in the layer. >>> I turn around that problem wich normally should work, as what I raed >>> everywhere, but not for me !! >>> >>> Regards >>> >>> E. POIZOT >>> >> >> > > _______________________________________________ > grassuser mailing list > [email protected] > http://grass.itc.it/mailman/listinfo/grassuser > > Hi, I check for spaces on columns, misllaneous character, etc. The text file is clean. I also check the bounadries of my region settings and it's ok, the points are inside it. I just produced a CSV file from a spreadsheet, and still not work. How to know what happend durin v.in.ascii execution (debug or a log file) ? Regards EP -- Cordialement ------------------------------------------------ Emmanuel Poizot Cnam/Intechmer B.P. 324 50103 Cherbourg Cedex Phone (Direct) : (00 33)(0)233887342 Fax : (00 33)(0)233887339 ------------------------------------------------ _______________________________________________ grassuser mailing list [email protected] http://grass.itc.it/mailman/listinfo/grassuser (See attached file: poizot.vcf)
poizot.vcf
Description: Binary data
_______________________________________________ grassuser mailing list [email protected] http://grass.itc.it/mailman/listinfo/grassuser
