<https://lh3.googleusercontent.com/-llvbD8PXEwQ/VzU5KcGEIiI/AAAAAAAAANM/uSsAui3a2HgbcWa7Uo0zn8na9rW_vPeowCLcB/s1600/both_inputs.PNG> Hi Graylog guru,
I'm new to Graylog. Just trying to deploy the OVA appliance in VMWare. The one I deploy is *graylog-2.0.0-2.ova*. So far working fine. No more Graylog web interface is disconnected issue. I try to receive the message from Windows server client, so I install the NXLog into Windows servers and config the IP of the Graylog server in the NXLog.conf file, thru UDP and port 541. There 2 Windows server only, will be add few more later. On the Graylog web inteface side, I went to *Systems --> Inputs*, and* Launch new input* (Syslog UDP) to start receive the input. I've created 2 inputs but only 1 is currently running. Another 1 is faild to start. Maybe this is the basic question... 1. How to setup these inputs so that I could receive the message from those both Windows server? How to add more? 2. In the Launch new input, on the *bind_address*. Should I leave it default or should I put the Graylog server IP? Thanks you for your support. I'll wait for next feedback -- You received this message because you are subscribed to the Google Groups "Graylog Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/graylog2/51df554f-986f-49c8-91d7-7f7c6e8f832c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
