Hi David, please also take a look at https://github.com/Graylog2/graylog-guide-syslog-linux which contains instructions how to configure rsyslog and syslog-ng to work with Graylog.
Cheers, Jochen On Friday, 20 May 2016 16:57:54 UTC+2, DAVID Bandeira wrote: > > Thank You tokred, > > *When i need to register one host in my graylog , i need to put > System/input, in check-box i put Syslog-UDP, but when i register in bind > address my host , appear um error it don't know that host, i would like to > know , how to register a new host in graylog.* > > *Thank You very much again. * > > > 2016-05-17 5:04 GMT-03:00: > >> Hi, >> >> check your syslog config, normally you need an @ before the IP/hostname, >> e.g. *.* @10.0.0.1 >> >> If correct, have you created a syslog UDP input in Graylog? Is it running? >> >> Regards >> >> >> On Monday, May 16, 2016 at 4:31:50 AM UTC+2, DAVID Bandeira wrote: >>> >>> Good Night People, >>> >>> First I ´d like to congratulate the excellent group, i am with any >>> doubts how to registering hosts in graylog, I put in the client server >>> configuration file ( /etc/syslog.conf ) * . * IPSERVERGRAYLOG , signed up >>> in graylog server , but not this gathering , I would advice how can I do >>> this . >>> >>> Thank you very much >>> >> -- You received this message because you are subscribed to the Google Groups "Graylog Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/graylog2/1047558c-2acc-4330-8af5-b11f64901dd9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
