Hi, I solved the issue, i change udp more than the 1024. On Tuesday, October 18, 2016 at 10:21:20 AM UTC+8, Mac Gyver wrote: > > Hi guys, my environments is Graylog 1.3, use the UDP input but show "Error > starting this input on node 572c0419 / Unknown: Permission denied.". I have > disable iptables and also use tcpdump check data. What should i do? Thanks. > > #tcpdump dst port 555 > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode > listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes > 10:20:54.165539 IP 10.0.3.28.ecnp > 10.0.1.127.dsf: UDP, length 531 > ...so on > > My Graylog UDP input setting: > > - expand_structured_data: true > - recv_buffer_size: 262144 > - port: 555 > - override_source: > - allow_override_date: true > - bind_address: 0.0.0.0 > - store_full_message: true > >
-- You received this message because you are subscribed to the Google Groups "Graylog Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/graylog2/980df08c-a81a-4792-9b0d-1709b1c1cb61%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
